Polibi Multi-Functional Murphy Bed with Sofa, Desk & Storage Cabinet - Full Size Instruction Manual

1. Product Overview

The Polibi Multi-Functional Murphy Bed is a versatile, space-saving furniture solution designed for small living areas. This unit integrates a full-size bed, a comfortable sofa, a functional desk, and a storage cabinet into a single compact design. It allows for easy conversion between a sleeping area and a living/working space, optimizing room utility.

Image 1.1: The Polibi Murphy Bed in its extended full-size bed configuration, showcasing the integrated desk and storage.

Image 1.2: The Polibi Murphy Bed in its compact sofa configuration, with the bed folded away.

2. Safety Information

Please read and understand all safety instructions before assembly and use. Failure to follow these instructions may result in injury or damage to the product.

• Adult Assembly Required: This product requires assembly by at least two adults.
• Wall Mounting: The Murphy bed unit must be securely anchored to a wall to prevent tipping. Use appropriate hardware for your wall type (wood studs, concrete, drywall anchors). Consult a professional if unsure.
• Weight Capacity: The bed is designed to support a maximum weight of 600 lbs (272 kg). Do not exceed this limit.
• Clearance: Ensure adequate clearance around the unit for safe operation of the bed and desk mechanisms.
• Children and Pets: Keep children and pets away from the unit during operation to prevent pinching or injury.
• Regular Inspection: Periodically check all bolts, screws, and connections to ensure they remain tight and secure.
• Mattress Compatibility: Use a mattress that fits the full-size bed frame and is compatible with a Murphy bed mechanism.

3. Components List

Before beginning assembly, verify that all parts are present and undamaged. Refer to the packing list included with your product for a detailed inventory. Typical components include:

• Main Cabinet Panels (sides, back, top, bottom)
• Bed Frame Assembly
• Sofa Frame and Cushions
• Desk Panel and Supports
• Storage Cabinet Doors and Shelves
• Hardware Pack (screws, bolts, cam locks, wall anchors, etc.)
• Assembly Tools (Allen wrench, screwdriver - usually not included)

4. Setup and Assembly

Assembly typically requires two adults and common household tools such as a Phillips head screwdriver, flathead screwdriver, and a hammer. A stud finder and drill may be necessary for wall mounting.

4.1 Pre-Assembly Steps

1. Unpack: Carefully unpack all components and lay them out on a clean, soft surface to prevent scratches.
2. Identify Parts: Compare all parts against the packing list and hardware diagram.
3. Tool Preparation: Gather all necessary tools.

4.2 Assembly Instructions (General Steps)

1. Assemble Main Cabinet: Follow the step-by-step instructions in your product-specific manual to construct the main cabinet frame. Ensure all connections are secure.
2. Install Bed Mechanism: Integrate the bed frame and its folding mechanism into the main cabinet. Pay close attention to spring tension or hydraulic piston installation as per your manual.
3. Attach Sofa and Desk Components: Secure the sofa frame, desk panel, and any associated supports to the main unit.
4. Install Storage Cabinetry: Attach doors, shelves, and any other storage elements.
5. Wall Mounting: This is a critical step. Position the assembled unit against the desired wall. Locate wall studs using a stud finder. Mark and drill pilot holes. Securely fasten the unit to the wall using the provided anti-tip hardware or appropriate anchors for your wall type. Do not skip this step.
6. Final Checks: Ensure all components are tightly secured and the unit is stable. Test the bed folding mechanism for smooth operation.

Image 4.1: Dimensional diagram of the Polibi Murphy Bed system, useful for planning placement and assembly.

5. Operating Instructions

5.1 Converting from Sofa to Bed

1. Clear the Area: Ensure the space in front of the sofa is clear of obstructions.
2. Remove Sofa Cushions: Lift and remove the sofa cushions.
3. Unlock Bed Mechanism: If your unit has a locking mechanism, disengage it.
4. Lower the Bed: Gently pull the bed frame downwards from the top handle. The mechanism will assist in lowering the bed smoothly to the floor.
5. Extend Legs: Ensure the bed support legs are fully extended and locked into place for stability.

5.2 Converting from Bed to Sofa

1. Remove Bedding: Remove pillows and heavy bedding that might obstruct the folding mechanism.
2. Retract Legs: Fold the bed support legs back into their stored position.
3. Lift the Bed: Grasp the bed frame and gently lift it upwards. The mechanism will assist in raising the bed back into the cabinet.
4. Lock Bed Mechanism: Engage any locking mechanism to secure the bed in the upright position.
5. Replace Sofa Cushions: Place the sofa cushions back onto the sofa frame.

Image 5.1: Visual representation of the bed's fold-out design and safety chain.

5.3 Using the Desk and Storage

• Desk: The integrated desk is fixed and accessible when the bed is in either the sofa or bed configuration. Use it for work, study, or as a display surface.
• Storage Cabinet: The cabinet features shelves and compartments for organizing books, linens, or other personal items. Open the doors to access.

Image 5.2: Close-up of the integrated storage cabinet and desk area.

6. Maintenance

• Cleaning: Wipe surfaces with a soft, damp cloth. Avoid harsh chemicals or abrasive cleaners. For sofa cushions, spot clean with a mild fabric cleaner as needed.
• Hardware Check: Periodically inspect all screws, bolts, and connections. Tighten any loose hardware to ensure stability and safe operation.
• Mechanism Lubrication: If the bed mechanism becomes stiff, apply a small amount of silicone-based lubricant to moving parts as recommended by the manufacturer (refer to your specific product manual if provided).
• Wall Anchors: Regularly check the wall anchors for any signs of loosening or damage. Re-secure if necessary.

7. Troubleshooting

8. Specifications

• Brand: Polibi
• Model: Multi-Functional Murphy Bed with Sofa, Desk & Storage Cabinet
• Size: Full
• Color: White
• Product Dimensions (Overall): 100.2"L x 76"W x 83.8"H (Length includes sofa/bed extension, Width is bed width, Height is cabinet height)
• Special Feature: Space-Saving Wall Bed
• Included Components: Desk, Sofa, Storage Cabinet
• Weight Capacity (Bed): Up to 600 lbs

9. Warranty and Support

For specific warranty information, please refer to the documentation provided with your purchase or contact Polibi customer support directly. If you encounter any issues not covered in this manual or require replacement parts, please reach out to the seller or manufacturer for assistance.

Contact Information: Refer to your purchase receipt or the Polibi brand website for the most current customer service contact details.