CallToU Caregiver Pager System User Manual

Introduction

This manual provides comprehensive instructions for the setup, operation, and maintenance of your CallToU Caregiver Pager System. Designed for home monitoring, this wireless call button system offers vibration alerts and low power reminders, ensuring timely assistance for seniors, patients, and individuals with disabilities.

The system includes a portable receiver and multiple waterproof SOS call buttons, facilitating constant communication between caregivers and those in need.

What's in the Box

The CallToU Caregiver Pager System includes the following components:

• 1 x Portable Pager Receiver
• 6 x Waterproof SOS Call Buttons
• Lanyards for Call Buttons
• AAA Batteries for Receiver
• 12V 23A Batteries for Call Buttons
• Mounting Accessories (Screws, 3M Adhesive Pads)
• Mini Screwdriver
• User Manual

Image: All accessories included in the CallToU Caregiver Pager System package. This includes the pager receiver, six call buttons, lanyards, batteries, mounting hardware, and user manual.

Setup Instructions

1. Install Batteries

• Receiver: Open the battery compartment on the back of the portable pager receiver. Insert 3 AAA batteries, ensuring correct polarity.
• Call Buttons: Use the provided mini screwdriver to open the battery compartment on each call button. Insert one 12V 23A battery into each, observing polarity. Close the compartments securely.

2. Power On and Pairing

The system is pre-paired at the factory. If re-pairing is needed or adding new call buttons:

1. Turn on the portable pager receiver using the Power On/Off button.
2. Press and hold the "Pairing Setup" button on the receiver until the display shows "00" and flashes.
3. Quickly press the SOS button on the call button you wish to pair. The receiver will emit a sound and display a number, indicating successful pairing.
4. Repeat for all call buttons.

3. Placement of Call Buttons

Call buttons can be worn or mounted:

• Lanyard: Attach a lanyard to the call button for wearing around the neck.
• Wall Mounting: Use the provided screws or 3M adhesive pads to mount call buttons in strategic locations such as beside the bed, in the bathroom (waterproof), or near a wheelchair.

Image: The CallToU Caregiver Pager System showing call buttons placed in different areas of a home, including a bedroom, living room, and kitchen, demonstrating its 500ft wireless range.

Image: Various methods for carrying and mounting the CallToU SOS call button, including screw mounting, adhesive patch mounting, wearing with a lanyard, placing on a table, clipping to a belt, or putting in a pocket.

Operating Instructions

1. Sending a Call Signal

To send an alert, simply press the large red SOS button on any of the call buttons. The button will illuminate briefly, and a signal will be sent to the portable pager receiver.

2. Receiving Alerts

The portable pager receiver will alert the caregiver in two ways:

• Vibration: The receiver will vibrate strongly.
• Audible Alert: The receiver will emit an audible tone. The digital display will show the number of the call button that sent the alert.

3. Adjusting Volume and Alert Tones

The receiver offers 5 adjustable volume levels (0-120dB) and 2 alert sound options (Ding Dong, Alarm). Use the "Volume Control" button on the receiver to cycle through volume levels and alert types.

Image: Key features of the CallToU Caregiver Pager System, highlighting IP55 waterproof rating, working temperature range, 5 volume levels (0-120dB), 500ft wireless range, 12V 23A alkaline battery, and low battery LED indicator.

4. Low Power Reminder

Both the receiver and call buttons feature a low battery reminder. An LED indicator on the receiver will light up when the transmitter (call button) or receiver itself has low power, prompting a battery replacement.

Maintenance

1. Battery Replacement

• Replace AAA batteries in the receiver when the low power indicator illuminates for the receiver.
• Replace 12V 23A batteries in call buttons when the low power indicator illuminates for the transmitter. Use the provided mini screwdriver for access.

2. Cleaning

Wipe the devices with a soft, dry cloth. Avoid using harsh chemicals or abrasive cleaners. The call buttons are waterproof (IP55 rated) but should not be submerged for extended periods.

Troubleshooting

• No Signal: Ensure both receiver and call button have fresh batteries and are powered on. Check if they are within the 500ft wireless range. Re-pair the devices if necessary (refer to "Setup Instructions").
• Weak Signal: Obstacles like thick walls or metal structures can reduce range. Try repositioning the receiver or call button.
• Receiver Not Responding: Check battery levels. Ensure the receiver is not in silent mode if an audible alert is desired.
• Call Button Not Activating: Ensure the button is pressed firmly. Check the call button's battery.

Specifications

• Model: B0FNWVHDT8
• Wireless Range: Up to 500 feet (152 meters) in open areas
• Receiver Power: 3 x AAA batteries (included)
• Call Button Power: 1 x 12V 23A battery (included)
• Volume Levels: 5 levels (0-120dB)
• Alert Tones: 2 options (Ding Dong, Alarm)
• Waterproof Rating (Call Button): IP55
• Operating Temperature: -22°F to 158°F (-30°C to 70°C)
• Features: Vibration alerts, low power reminder, expandable pairing

Image: Detailed diagram of the CallToU Pager Receiver and SOS Call Button, showing dimensions, control buttons (Power On/Off, Volume Control, Pairing Setup), digital display, speaker, LED indicator, detachable bracket, belt clip, and battery compartment.

Warranty & Support

CallToU offers a lifetime warranty for this caregiver pager system. For any questions, concerns, or support needs regarding your CallToU caregiver pager, please feel free to contact us via Amazon's messaging system. Our customer service team is available to assist you.