1. Introduction
Thank you for choosing the Firehawk Tire Inflator F-JN-8113. This portable, cordless air compressor is designed for efficient and convenient inflation of various items, including car, motorcycle, and bicycle tires, as well as sports balls. Featuring a powerful 150PSI output, a large 20000mAh battery, smart inflation modes, and a dual LCD display, this device is an essential tool for roadside emergencies and everyday use. Please read this manual thoroughly before operation to ensure safe and optimal performance.
Video: Product Overview & Operation. This video demonstrates the key features and basic operation of the Firehawk Tire Inflator.
2. Safety Information
To prevent injury or damage, always observe the following safety precautions:
- Read all instructions before use.
- Keep out of reach of children.
- Do not leave the inflator unattended during operation.
- Avoid over-inflating items; always check the recommended pressure for the item being inflated.
- Do not operate the inflator in wet conditions or near flammable liquids/gases.
- Ensure the air hose is securely connected before starting inflation.
- Store the inflator in a cool, dry place when not in use.
- Do not disassemble or modify the device. Contact qualified personnel for repairs.
3. Package Contents
Verify that all items are present in your package:
- Firehawk Tire Inflator (Air Pump)
- Inflatable Tube (1.64FT extra-long air hose)
- Type-C USB Cable
- Gift Bag
- Short Tapered Nozzle
- Presta Valve Adaptor
- Ball Needle Adapter
- Long Tapered Nozzle
Image: Firehawk Tire Inflator and its complete set of accessories, including various nozzles and cables.
4. Product Overview
Key Features:
- 6X Faster Inflation: Equipped with an upgraded Japanese motor and cylinder, this 150PSI cordless air pump inflates a 195/65R15 tire from 27 to 36 PSI in under 1 minute, significantly faster than standard portable air compressors.
- 20000mAh Long-lasting Power: The rechargeable high-capacity battery provides up to 2 hours of cordless use. A full charge can inflate up to 20 cars, 30 motorcycles, 46 bicycles, or 98 balls.
- 4+N Smart Inflation Modes: Features four preset modes (Car, Motorcycle, Bike, Ball) and custom options for other inflatables. Supports PSI, BAR, KPA, and KG/CM² units with an automatic shut-off for precise inflation.
- Upgraded Dual LCD Display: Two large digital LCD screens simultaneously show real-time pressure and preset values, ensuring clear readability day or night.
- All-in-One Emergency and Power Tool: Includes a 3-mode LED flashlight (Normal, Alarm, SOS) and a 5V/2A USB port for charging phones and other devices. The 1.64FT extra-long air hose offers extended reach.
Image: Visual comparison highlighting the Firehawk inflator's 6X faster inflation capability.
Image: Close-up of the dual LCD display, illustrating real-time pressure, preset pressure, and battery indicator.
5. Setup
- Charge the Device: Before first use, fully charge the Firehawk Tire Inflator using the provided Type-C USB cable. The battery indicator on the LCD screen will show charging status.
- Attach the Air Hose: Screw the inflatable tube securely into the air hose port on the top of the inflator.
- Select Appropriate Nozzle: Choose the correct nozzle adapter for the item you wish to inflate (e.g., Presta valve for bicycles, ball needle for sports balls, short tapered nozzle for small inflatables). Attach it to the end of the air hose.
- Power On: Long-press the power button (usually the central button) for 3 seconds to turn on the device. The LCD display will illuminate.
Image: The Firehawk Tire Inflator connected to a car tire valve, ready for inflation.
6. Operating Instructions
General Inflation:
- Connect to Item: Securely attach the nozzle adapter to the valve of the item you want to inflate. The current pressure will be displayed on the LCD screen.
- Select Mode: Short press the 'M' button (Mode/Unit Toggle) to cycle through the preset modes: Car, Motorcycle, Bike, Ball, or Custom. Each mode has a default preset pressure.
- Adjust Pressure: Use the '+' and '-' buttons to adjust the desired target pressure. The preset value will flash while adjusting.
- Start Inflation: Press the power button once to begin inflation. The inflator will automatically stop when the preset pressure is reached.
- Stop Inflation Manually: To stop inflation at any time, press the power button again.
- Disconnect: Carefully disconnect the hose from the item's valve. A small amount of air may escape, which is normal.
Video: Demonstration of car tire inflation using the Lamicall (similar to Firehawk) portable air pump.
Video: Speed test of a Lamicall (similar to Firehawk) car air pump, showing inflation time.
Emergency Light & Power Bank:
- LED Flashlight: Short press the light button (usually next to the power button) to cycle through the 3 modes: Normal (steady white light), Alarm (red slow flashing), and SOS (red fast flashing). This is useful for night-time repairs or signaling.
- Power Bank Function: Use the 5V/2A USB-A output port to charge your smartphone or other USB-powered devices. Connect your device's charging cable to the USB-A port on the inflator.
Image: The Firehawk Tire Inflator demonstrating its multi-functionality as an emergency light and a power bank for charging mobile devices.
7. Maintenance
- Cleaning: Wipe the device with a soft, dry cloth. Do not use harsh chemicals or abrasive cleaners.
- Storage: Store the inflator and its accessories in the provided gift bag in a cool, dry place, away from direct sunlight and extreme temperatures.
- Battery Care: To prolong battery life, charge the device fully every 3-6 months even if not in regular use.
- Hose Inspection: Regularly check the air hose and nozzles for any signs of wear, cracks, or damage. Replace if necessary.
8. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Inflator does not turn on | Low battery; Power button not pressed correctly | Charge the device; Long-press power button for 3 seconds |
| No air output / Slow inflation | Hose not securely connected; Nozzle blocked; Incorrect mode/pressure setting | Ensure hose/nozzle are tight; Clear any blockages; Verify mode and target pressure |
| Inaccurate pressure reading | Loose connection; Sensor issue | Ensure secure connection; If problem persists, contact support |
| Device overheats | Continuous long-term operation | Allow the device to cool down before resuming use |
9. Specifications
- Brand: Firehawk
- Model Name: F-JN-8113
- Maximum Pressure: 150 PSI
- Power Source: Battery Powered (20000mAh)
- Voltage: 12 Volts
- Noise Level: 50 Decibels
- Hose Length: 1.64 Feet
- Special Features: 6X Faster Inflation, 20000mAh Long-lasting Power, 4+N Smart Inflation Modes, Upgraded Dual LCD Display, All-in-One Emergency and Power Tool
- Included Components: 1.64FT extra-long air hose, 3-mode LED flashlight, 5V/2A USB port, various nozzles
- UPC: 721545169907
10. Warranty and Support
For warranty information, product registration, or technical support, please refer to the warranty card included in your product packaging or visit the official Firehawk website. Keep your purchase receipt as proof of purchase.