Important Safety Information
WARNING: CHOKING HAZARD - Small Parts. This product contains small parts and is not suitable for children under 3 years of age. Recommended age for assembly is 14 years and older.
Always keep small parts away from young children and pets. Dispose of packaging materials responsibly.
Product Overview
The BLOKEES Transformers Classic Class Movie 3 Jet Wing Optimus Prime Model Kit (CC21) is an officially licensed, 163-piece snap-fit assembly model. This premium scale figure stands at 13.4 cm and features movie-accurate detailing, LED-illuminated eyes and chest, and 20 movable articulation points. The kit includes a comprehensive arsenal of Optimus Prime's signature weapons and a display stand.
No glue, paint, or additional tools are required for assembly. Batteries for the LED features are included.
Figure 1: Packaging for the BLOKEES Jet Wing Optimus Prime Model Kit, showing the assembled model and key features.
Setup and Assembly
1. Unboxing and Part Identification
Carefully open the product packaging. All 163 pre-colored parts are organized on sprues and sealed in plastic bags. Refer to the included instruction manual for a detailed parts list and assembly diagrams.
Figure 2: Individual model kit parts are organized in sealed plastic bags for protection and easy identification.
Figure 3: A close-up view of a sprue, showing individual pre-colored parts attached to the frame.
2. Assembly Process
Follow the step-by-step instructions provided in the included assembly manual. The kit utilizes a snap-fit design, meaning parts connect securely without the need for adhesive. Gently detach parts from the sprues and connect them as indicated in the diagrams.
- Tool-Free Assembly: No cutting tools or glue are required.
- Pre-Colored Parts: All pieces are pre-colored, eliminating the need for painting.
- LED Installation: The LED lighting system for the eyes and chest comes with pre-installed batteries. Follow the manual for specific connection points during assembly.
Figure 4: The included instruction manual provides detailed, visual steps for assembly.
Operating Features
1. LED Lighting
The model features built-in LED lights in the eyes and chest. These lights are powered by an included nonstandard battery. Once assembled, the lights should function immediately. Refer to the assembly manual for the exact location of the battery compartment and any activation switches, if present.
2. Articulation and Posing
The figure boasts 20 movable articulation points, allowing for dynamic posing. Gently manipulate the joints to achieve desired stances. The multi-articulated wings also feature side movement and folding mechanisms for various display options.
Figure 5: The assembled Jet Wing Optimus Prime model showcasing its articulation and flight configuration.
3. Weapon and Accessory Integration
The kit includes a complete movie trilogy arsenal. These accessories can be attached to the figure's designated connection points. The swappable head sculpt can be interchanged to customize the figure's appearance.
- Jetwing Gun Pods
- Jetwing Flight Unit
- Dual Energon Swords
- Combat Shield
- Energon Axe
- Ion Blaster
- Barrage Cannons
Figure 6: A selection of the included weapon accessories, ready for attachment to the model.
Figure 7: The Optimus Prime model equipped with a sword and shield, demonstrating weapon integration.
Maintenance
1. Cleaning
To clean the model, gently wipe it with a soft, dry cloth. Avoid using harsh chemicals, abrasive cleaners, or excessive moisture, as these can damage the plastic or painted surfaces.
2. Battery Replacement
If the LED lights dim or stop working, the battery may need replacement. Refer to the assembly manual for instructions on accessing the battery compartment. Use only the specified nonstandard battery type for replacement.
Troubleshooting
- Parts not fitting: Ensure you are using the correct parts for each step as indicated in the manual. Apply gentle, even pressure. Do not force parts together, as this may cause damage.
- LED lights not working: Verify that the battery is correctly installed and fully charged. Check all connections for the LED components as per the assembly instructions.
- Loose joints: If a joint feels too loose, carefully disassemble and reassemble the specific section, ensuring all parts are seated correctly.
Specifications
| Model Name | Transformers DX Jet Wing Optimus Prime |
| Model Number | CC21 |
| Brand | BLOKEES |
| Series | Transformers Classic Class |
| Type | Assembly Character Toy / Model Kit |
| Recommended Age | 14+ years |
| Material | ABS Plastic |
| Figure Height | 13.4 cm (5.28 inches) |
| Number of Pieces | 163 |
| Articulation Points | 20 |
| Special Features | LED-illuminated eyes and chest, Multi-articulated wings, Swappable head sculpt |
| Power Source | Battery (for LEDs) |
| Batteries Included | 1 Nonstandard Battery |
| Assembly | Snap-fit, Tool-free |
| Item Weight | 0.35 g |
| Item Dimensions (L x W x H) | 5.91" x 3.15" x 9.84" |
Warranty Information
Specific warranty details for the BLOKEES Transformers Classic Class Movie 3 Jet Wing Optimus Prime Model Kit are not provided in the product information. For inquiries regarding warranty coverage, please refer to the retailer's return policy or contact the manufacturer directly.
Customer Support
If you encounter any issues or have questions not covered in this manual, please contact BLOKEES customer support or the retailer from whom you purchased the product. For general inquiries, you may visit the BLOKEES store on Amazon: BLOKEES Store.
Official Product Videos
No official product videos from the seller were found in the provided data.