Instruction Manual

1. Product Overview

This UYRUREL Soft Silicone Adjustable Stand Cover is specifically designed to provide protection and enhanced functionality for your KINGRID T20 Android 15 Tablet. It features a durable, skin-friendly silicone construction and an integrated adjustable stand for versatile viewing angles.

The case is engineered with precise cutouts to ensure full access to all ports, buttons, and the camera of your KINGRID T20 tablet without needing to remove the cover.

2. Safety Information

• Keep the product away from extreme temperatures and direct sunlight.
• Do not expose the case to sharp objects that could puncture or damage the silicone material.
• Ensure the tablet is securely seated in the case to prevent accidental dislodgement.
• This product is an accessory for the KINGRID T20 tablet and is not a toy. Keep out of reach of small children.

3. Package Contents

• 1 x UYRUREL Soft Silicone Adjustable Stand Cover (RED)

4. Setup Instructions

4.1 Installing Your Tablet

1. Gently align your KINGRID T20 tablet with the case, ensuring the camera and ports match the case's openings.
2. Insert one side of the tablet into the case, then carefully work the silicone edges around the remaining sides of the tablet until it is fully enclosed and snug.
3. Verify that all corners are protected and that buttons and ports are accessible.

Image: The case is designed to fully wrap around the tablet, providing comprehensive protection against drops and impacts.

4.2 Removing Your Tablet

1. Starting from one corner, gently peel back the silicone edge of the case from the tablet.
2. Continue to work around the edges until the tablet can be safely lifted out of the case.

5. Operating Instructions

5.1 Using the Adjustable Stand

The case features a ruggedized, concealed bracket that functions as an adjustable stand. To use:

1. Locate the integrated stand on the back of the case.
2. Gently pull the stand outwards until it clicks into your desired viewing or typing angle. The stand is designed to offer multiple stable positions.
3. To retract the stand, push it back into its concealed position until it lies flat against the case.

Image: The adjustable stand allows for hands-free viewing and typing at various angles.

5.2 Accessing Ports and Buttons

The case is designed with precise cutouts for all essential tablet features:

• Charging Port: Easily accessible for charging your tablet.
• Headphone Jack: Unobstructed access for audio devices.
• Volume Buttons: Covered by responsive silicone buttons for protection and easy operation.
• Power Button: Covered by a responsive silicone button for protection and easy operation.
• Camera: The camera lens and flash are fully exposed for unhindered photography.

Image: Precise openings ensure full functionality of the tablet while protected by the case.

6. Maintenance

To keep your UYRUREL tablet case clean and in good condition:

• The soft silicone material can be cleaned directly with water.
• For stubborn dirt or stains, use a mild soap solution and a soft cloth.
• Rinse thoroughly and allow the case to air dry completely before re-installing your tablet.
• Avoid using harsh chemicals or abrasive cleaners, as these may damage the silicone.

Image: The high-quality silicone material is durable, easy to clean, and resistant to daily wear.

7. Troubleshooting

• Case does not fit: Ensure your tablet is a KINGRID T20 Android 15 Tablet. This case is not compatible with other tablet models.
• Difficulty accessing ports/buttons: Re-check the installation of the tablet within the case to ensure it is properly aligned.
• Stand not holding position: Ensure the stand is fully extended and clicked into place. Avoid excessive force.

If you encounter any other issues or have questions, please refer to the "Warranty and Support" section for contact information.

8. Specifications

Image: The interior honeycomb design aids in heat dissipation, keeping the tablet cool.

9. Warranty and Support

UYRUREL is committed to providing high-quality after-sales service. If you encounter any problems with your product or packaging, please contact us directly.

We aim to provide a satisfactory solution within 24 hours of your inquiry.

For support, please contact the seller through the platform where you purchased the product.