Introduction
This manual provides instructions for the NiteRider Swift 700 Front Bike Light and Vmax+ 180 Rear Bike Light Combo. This system is designed to enhance visibility and illumination for various cycling conditions, including urban commutes, rural roads, and night riding. Please read these instructions thoroughly before use to ensure proper installation, operation, and maintenance.
Image: NiteRider Swift 700 Front Bike Light and Vmax+ 180 Rear Bike Light Combo, showing both lights.
What's in the Box
- Headlight with integrated mount
- Taillight
- Seatpost Mount
- USB-C Charging Cable
Setup
Installation
The Swift 700 front bike light installs quickly and easily using its integrated rubber strap mount. Wrap the strap around your handlebar and secure it firmly.
Image: NiteRider Swift 700 Front Light mounted on a bicycle handlebar, highlighting its compact size and USB-C charging capability.
The Vmax+ 180 rear bike light features a clothing clip for attachment to bags or jerseys, and a rubber seat post mount to fit sizes 15.8mm-31.6mm. Ensure the light is securely attached and visible from the rear.
Image: NiteRider Vmax+ 180 Rear Light mounted on a bicycle seatpost, showing its adjustable angle and USB-C charging port.
Operating Instructions
Charging
Both the Swift 700 and Vmax+ 180 lights are USB-C rechargeable. Connect the provided USB-C charging cable to the light and a 2A charger. A full recharge can take as little as 2 hours. The LED power button on the Swift 700 doubles as a low battery indicator, turning red when the charge is below 20%.
Light Modes
The Swift 700 front light offers 5 modes: 4 steady modes and 1 flash mode. The Vmax+ 180 taillight includes 7 modes: 2 steady modes and 5 safety-focused flash modes (Fast/Slow, Pulse, Economy, Disco). The Vmax+ 180 features a Memory Mode, which will power the light back on at the last setting used.
Image: Table detailing the 5 modes of the Swift 700 front light, including lumen output and approximate run times.
Image: Table detailing the 7 modes of the Vmax+ 180 rear light, including flash patterns and approximate run times.
Travel Lock Mode
To prevent accidental activation during transport or storage, the Swift 700 features a Travel Lock Mode. To unlock, press and hold the power button for 8-10 seconds until the light activates. This feature conserves battery life when the light is not in use.
Maintenance
Both lights are IP64 rated for water and dust resistance. To maintain optimal performance, regularly clean the lights with a soft, damp cloth. Avoid using harsh chemicals or abrasive materials. Ensure the USB-C port cover is securely closed when not charging to maintain water resistance. Store the lights in a cool, dry place when not in use.
Troubleshooting
Light Not Turning On
If the light does not turn on, ensure it is not in Travel Lock Mode. Press and hold the power button for 8-10 seconds to exit Travel Lock Mode. Also, check the battery level and recharge the light if necessary. If the issue persists, refer to the warranty information for support.
Specifications
| Feature | Detail |
|---|---|
| Brand | NiteRider |
| Model Number | 6817 |
| Color | Black / Red |
| Material | Nylon, Rubber |
| Power Source | Battery Powered |
| Water Resistance Level | IP64 (Water Resistant) |
| Item Weight | 8.48 ounces |
| Mounting Type | Handlebar Mount / Seatpost Mount |
| Number of Settings | 12 (5 for Swift 700, 7 for Vmax+ 180) |
| Light Output Maximum (Front) | 700 Lumens |
| Light Output Maximum (Rear) | 180 Lumens |
Warranty and Support
NiteRider provides the following warranty coverage:
- 1-year Warranty: Rechargeable battery cells.
- 2-year Warranty: Printed circuit boards, switches, and AC adapters.
- Limited Lifetime Warranty: Covers any defects in mechanical components (housings, covers, mounts, and fasteners) and LEDs.
For further assistance or to view more NiteRider products, please visit the NiteRider Store.
