Comfort Direct Mazon LED Light Array Bulb Replacement Instruction Manual

Introduction

This manual provides comprehensive instructions for the installation, operation, and maintenance of your Comfort Direct Mazon LED Light Array Bulb Replacement. This product is specifically designed as an upgrade for select Harbor Breeze ceiling fan models, offering enhanced brightness and dimmable functionality.

Safety Information

WARNING: Risk of Electric Shock. Disconnect power at the circuit breaker before installation or servicing.

• Always ensure the power supply to the ceiling fan is completely turned off before beginning any installation or maintenance.
• If you are unsure about electrical wiring, consult a qualified electrician.
• Do not attempt to modify the LED light array or its components.
• Use only with compatible Harbor Breeze ceiling fan models as specified.

Package Contents

Verify that all components are present before beginning installation:

• LED Array
• Lens
• Mounting Hardware
• Wiring Connector

Installation Guide

Follow these steps carefully to install your new LED light array:

1. Disconnect Power: Before starting, ensure the power to your ceiling fan is turned off at the circuit breaker to prevent electrical shock.
2. Access Existing Light Kit: Carefully remove the existing light kit cover and the old LED light array from your Harbor Breeze ceiling fan. You will need to reuse the original mounting screws.
3. Prepare Wiring: Locate the pin connector wiring from your current fan wiring. Cut off this pin connector.
4. Connect New Wiring: Use the wiring connector included in your kit. Connect the BLUE wire coming from your fan to the BLACK wire in your new LED array assembly. Ensure all connections are secure.
5. Mount New LED Array: Position the new LED array in the ceiling fan's light housing. Secure it using the original mounting screws.
6. Install Lens: Place the retrofit lens over the LED array and secure it according to your fan's design.
7. Restore Power: Once installation is complete and all components are securely in place, restore power at the circuit breaker.

This image displays the circular LED light array, highlighting the numerous individual LED chips arranged on the circuit board. The central wiring connector for power input is visible, along with mounting screw points around the perimeter. Key components like resistors and capacitors are also identifiable on the board.

Operation

The Comfort Direct Mazon LED Light Array is designed for simple operation:

• Power On/Off: Use your existing wall switch or ceiling fan remote control to turn the light array on or off.
• Dimmable Functionality: This LED module is dimmable. If your ceiling fan system includes a compatible dimmer switch or remote control, you can adjust the light intensity from 0% to 100%.

Maintenance

To ensure the longevity and optimal performance of your LED light array, follow these simple maintenance guidelines:

• Cleaning: Ensure power is off before cleaning. Gently wipe the lens and the visible parts of the LED array with a soft, dry, or slightly damp cloth. Do not use abrasive cleaners or solvents.
• No User-Serviceable Parts: The LED array contains no user-serviceable parts. Do not attempt to disassemble or repair it.

Troubleshooting

If you encounter issues with your LED light array, refer to the following common solutions:

• Light Does Not Turn On:
  • Check if the power supply to the fan is on at the circuit breaker.
  • Verify that all wiring connections are secure and correctly matched (Blue to Black).
  • Ensure the wall switch or remote control is functioning correctly.
• Light Flickers or Dims Incorrectly:
  • Confirm that your dimmer switch is compatible with LED lighting.
  • Check for loose wiring connections.
• Light is Not as Bright as Expected:
  • Ensure the dimmer is set to maximum brightness.
  • Verify the light array is correctly installed and receiving full power.

If problems persist after troubleshooting, contact customer support.

Product Specifications

Warranty and Support

Comfort Direct products are manufactured to high-quality standards. For specific warranty details or technical support, please refer to the product packaging or contact Comfort Direct customer service directly. Keep your purchase receipt for warranty claims.

For further assistance, please visit the Comfort Direct website or contact their customer support.