BLOKEES Iron Man Mark LXXXV EX Model Kit Instruction Manual

Important Safety Information

WARNING: CHOKING HAZARD - Small Parts. This product contains small parts and is not suitable for children under 3 years of age. Recommended for ages 14 and up. Adult supervision is advised for younger builders. Keep packaging and this instruction booklet for future reference. Clean the model with a dry cloth only.

Product photography may be affected by lighting conditions. The actual product may vary slightly from images shown.

Product Overview

The BLOKEES Champion Class Marvel Infinity Saga Iron Man Mark LXXXV EX is an officially licensed, articulated model kit. This kit allows you to construct Tony Stark's final and most powerful suit from Avengers: Endgame, featuring screen-accurate detail, a built-in LED lighting system, and extensive articulation. The EX version includes an imitation electroplated metallic finish for enhanced color and shine, and additional exclusive accessories.

• Light-Up Chest & Eyes: Integrated LED system illuminates the Arc Reactor and eyes.
• 39 Ultra-Articulated Joints: Engineered for dynamic posing, including butterfly shoulders, chest drop-down joints, and dual ball-jointed wrists.
• Tool-Free Assembly: Features a snap-off panel design with pre-coated parts, requiring no glue, paint, or cutting.
• Metallic Finish: The EX version boasts a premium metallic coating for a striking appearance.

Image: The product packaging for the BLOKEES Iron Man Mark LXXXV EX model kit, showing the assembled figure and kit details.

What's in the Box

The BLOKEES Iron Man Mark LXXXV EX model kit includes the following components:

• Iron Man MK85 EX Model Kit (167 pieces)
• Dorsal Wing Thruster
• Energy Knife
• Arm Nano Cannonball
• Nano Shield
• Hand Flame Effect Parts (2 pairs of blast effects)
• Foot Flame Effect Parts
• Interchangeable Hands (3 sets of hands, 6 total)
• Exclusive Display Stand
• Instruction Booklet

Image: All components included in the BLOKEES Iron Man Mark LXXXV EX model kit, laid out on a white surface, including the figure, display stand, and various accessories.

Setup and Assembly

This model kit features tool-free snap-fit assembly. No glue, paint, or cutting tools are required. Carefully follow the steps outlined in the included instruction booklet.

1. Unpack Components: Carefully remove all parts from the packaging. Identify the different sprues (frames holding the parts) and individual loose parts.
2. Identify Parts: Refer to the parts diagram in the instruction booklet to identify each component. Parts are typically labeled on the sprues.
3. Detach Parts: Gently snap off each part from its sprue. Avoid twisting or forcing parts to prevent breakage. If a part is difficult to detach, use a hobby knife or nippers (not included) with caution, though they are not strictly required.
4. Assemble Sections: Follow the sequential steps in the instruction booklet to assemble the model. Typically, assembly proceeds from the core body outwards to limbs and accessories.
5. Connect Joints: Ensure all articulated joints are properly connected. Apply gentle pressure until parts snap securely into place.
6. Install LED Unit (if applicable): The instruction booklet will detail the installation of the LED lighting system for the chest Arc Reactor and eyes. Ensure batteries (if required and not included) are inserted correctly.
7. Attach Accessories: Once the main figure is assembled, attach the various accessories such as the Dorsal Wing Thruster, Energy Knife, Arm Nano Cannonball, Nano Shield, and flame effect parts as desired.
8. Mount on Display Stand: Use the exclusive display stand to pose and showcase your completed Iron Man Mark LXXXV EX figure.

Image: Various sprues containing the individual parts of the BLOKEES Iron Man Mark LXXXV EX model kit, organized by color and shape, ready for assembly.

Image: A collection of smaller, individual parts for the BLOKEES Iron Man Mark LXXXV EX model kit, including joints, effect pieces, and the display base components.

Operating the Model

Once assembled, the Iron Man Mark LXXXV EX model offers several operational features:

• Articulation: Utilize the 39 points of articulation to pose the figure in various dynamic stances. Gently move joints such as the butterfly shoulders, chest drop-down joints, and dual ball-jointed wrists to achieve desired poses. Avoid excessive force to prevent damage.
• LED Lighting System: Activate the built-in LED system to illuminate the Arc Reactor in the chest and the eyes. Refer to the instruction booklet for the location of the power switch and battery compartment (if applicable). Ensure fresh batteries are used for optimal brightness.
• Accessory Integration: Attach and detach accessories like the Dorsal Wing Thruster, Energy Knife, Arm Nano Cannonball, Nano Shield, and flame effect parts to recreate iconic scenes or create new display configurations.

Image: The fully assembled BLOKEES Iron Man Mark LXXXV EX figure in a dynamic flying pose, showcasing its articulation and effect parts.

Image: The BLOKEES Iron Man Mark LXXXV EX figure in an action pose, wielding the energy knife and demonstrating its articulation and metallic finish.

Maintenance

To maintain the appearance and functionality of your BLOKEES Iron Man Mark LXXXV EX model kit:

• Cleaning: Use a soft, dry cloth to gently wipe away dust and debris. Do not use water, cleaning solutions, or abrasive materials, as these may damage the metallic finish or electronic components.
• Storage: Store the model in a cool, dry place away from direct sunlight and extreme temperatures to prevent material degradation or discoloration.
• Battery Replacement: If the LED lights dim or stop working, replace the batteries according to the instructions in the manual. Ensure proper battery polarity.

Troubleshooting

If you encounter issues during assembly or operation, consider the following:

• Parts Not Fitting:
  • Ensure you are using the correct parts for the current step by cross-referencing with the instruction booklet's diagrams.
  • Check for any small plastic nubs or excess material on the connection points that might prevent a snug fit. These can usually be carefully removed with a fingernail or a hobby knife (use caution).
  • Apply gentle, even pressure. Avoid forcing parts, as this can cause breakage.
• Missing Parts:
  • Thoroughly check all packaging materials and sprues. Small parts can sometimes be overlooked.
  • If a part is genuinely missing, contact BLOKEES customer support with details of the missing component (part number from the manual, description).
• LED Lights Not Working:
  • Verify that batteries are inserted correctly with the correct polarity.
  • Ensure the batteries are fresh. Replace them if necessary.
  • Check that the power switch is in the "ON" position.
  • Inspect connections for any loose wires or contacts (if accessible and safe to do so).
• Loose Joints:
  • Some joints may become loose over time with repeated posing. This is common for articulated figures.
  • For minor looseness, a very small amount of clear nail polish or a specialized joint-tightening fluid can be applied to the ball joint or peg, allowed to dry, and then reassembled. Use sparingly.

Specifications

Warranty and Support

For warranty information or technical support regarding your BLOKEES Iron Man Mark LXXXV EX model kit, please refer to the contact information provided on the product packaging or visit the official BLOKEES website. Keep your purchase receipt as proof of purchase.

BLOKEES Official Store: Visit BLOKEES Store on Amazon