Introduction
This manual provides detailed instructions for the assembly, operation, and maintenance of your PETEMPO Outdoor Heated Cat House, Model POCH001. Designed to offer a safe and warm shelter for outdoor cats, this unit features durable construction, precise temperature control, and all-weather resistance. Please read this manual thoroughly before assembly and use to ensure proper function and safety.
Safety Information
- Ensure the heating pad is UL Certified and used according to instructions.
- Keep the power cord away from water and inspect it regularly for damage. The cord is chew-resistant, but continuous inspection is recommended.
- Do not immerse the heating pad or its controller in water. The heating pad is water-resistant, but not waterproof for submersion.
- Place the cat house on a stable, level surface.
- Ensure proper ventilation around the unit.
- Supervise pets during initial use to ensure they adapt safely to the heated environment.
Package Contents
Before assembly, verify that all components are present. Refer to the assembly video for visual identification of parts.
Video: Product List and Assembly Overview. This video provides a visual guide to all included parts and the complete assembly process for the PETEMPO Outdoor Heated Cat House.
Assembly Instructions
Follow these steps carefully for proper assembly. A power drill is recommended for faster and more secure fastening. For visual guidance, please refer to the assembly video provided above.
Step 1: Assemble the Base Panels
Attach the support bars (part 12) to the main base panels (parts 1 and 2) using screws (part A). Ensure the panels are aligned correctly before fastening.
Step 2: Attach Legs to Side Panels
Secure the legs (part 12) to the side panels (parts 3 and 4) using screws (part A). Ensure a stable connection for the house's foundation.
Step 3: Connect Side Panels to Base
Use screws (part C) and wooden dowels (part D) to connect the side panels (parts 3 and 4) to the base panels (parts 1 and 2). This forms the main structure of the cat house.
Step 4: Attach Remaining Side Panels
Continue using screws (part C) and wooden dowels (part D) to attach the remaining side panels to complete the main housing structure.
Step 5: Install Center Support Bar
Attach the center support bar (part 13) to the pre-drilled hole at the center line of the cat house using screws (part A). This adds structural integrity.
Step 6: Attach Entrance Door
Use screws (part B) and hinges (part H) to attach the entrance door (part 7) to the designated opening of the cat house.
Step 7: Install Bottom Panel
Flip the cat house over. Insert and secure the bottom panel (part 6) into the base of the cat house.
Step 8: Attach the Roof
Attach the roof panel (part 5) to the top of the cat house using screws (part B). The hinges (part F) are pre-installed on the roof panel.
Step 9: Install Small Components
Screw the small latch components (part E) to the pre-drilled holes on the top and side panels respectively. These secure the roof when closed.
Step 10: Install Hydraulic Rod
Install the hydraulic rod (part E) to the designated attachment points on the roof and side panel. This rod assists in smooth and safe opening/closing of the roof.
Step 11: Attach Entrance Components
Use screws (part G) to attach the entrance components (parts 9A, 9B, and 10) to the entrance of the cat house. This forms the ramp and protective overhang.
Step 12: Install Insulation Cotton
Attach the insulation cotton panels (parts 14-21) to the inner walls of the cat house using the pre-installed Velcro strips. Ensure all inner surfaces are covered for optimal insulation.
Step 13: Place Heating Pad
Place the heating pad (part K) inside the cat house. Route the power cord through the small hole at the bottom of the cat house. For better heat retention, place the heating pad underneath the insulation cotton.
Operating Instructions
Heating Pad Operation
The included heating pad features a controller for temperature and timer settings.
Image: Heating Pad Controller. This image displays the heating pad controller with its various temperature and timer settings.
- Turn On/Off: Press and hold the "ON/OFF" button for 3 seconds to activate or deactivate the heating pad.
- Adjust Temperature: Press the "HEAT" button to cycle through 9 temperature settings, ranging from 80°F (26.6°C) to 136°F (57.5°C).
- Adjust Timer: Press the "TIMER" button to select from 4 timer options: 4, 8, 12, or 24 hours. The heating pad will automatically shut off after the selected duration.
Maintenance
Cleaning the Heating Pad
The heating pad features a removable fabric cover for easy cleaning.
- Unplug the heating pad from the power source.
- Unzip the fabric cover and remove the internal heating element.
- The fabric cover can be machine washed on a gentle cycle with mild detergent. Air dry completely before reassembling.
- Wipe the internal heating element with a damp cloth if necessary. Ensure it is completely dry before placing it back into the cover.
Image: Heating Pad Safety Features. This image highlights the water-resistant and flame-retardant properties of the heating pad, crucial for safety and easy cleaning.
General House Cleaning
- Regularly sweep or vacuum the interior to remove dirt and debris.
- Wipe down interior and exterior surfaces with a damp cloth and mild, pet-safe cleaner.
- Inspect the roof and base for any signs of wear or damage, especially after severe weather.
- The insulation cotton can be removed for cleaning or for use in warmer seasons.
Image: All-Season Adaptability. This image shows the cat house with and without insulation, highlighting its adaptability for different seasons.
Key Features
- Year-Round Durability & Comfort: Constructed from 12mm solid wood panels and lined with 2cm insulating pearl foam. The removable foam allows for warmth in winter and coolness in summer.
- Precision Heating: The included UL Certified heating pad offers 9 temperature settings (80°F–136°F) and 4 timer options (4, 8, 12, 24 hours).
- Safety Heating System: UL Certified, water-resistant heating pad with a removable fabric cover for easy cleaning. Features a chew-resistant cord.
- Safe Access & Security: An extended non-slip ramp facilitates entry and exit. A one-way side escape door provides a safe exit from predators. The hydraulic rod-equipped roof opens safely, preventing pinching.
- All-Weather Resistance: Sloped asphalt roof prevents water pooling. An 8-inch raised base protects against snow and groundwater. The roof supports up to 33 lbs (15kg).
- Spacious Interior: Measures 34.5 x 21.5 inches, providing ample space for multiple cats or other small animals.
Image: Outdoor Cat House in Winter. This image shows the heated cat house in a snowy setting, highlighting its weatherproof design and heating capabilities.
Image: One-Way Escape Door. This image illustrates the one-way escape door feature, showing a cat exiting while a raccoon approaches, emphasizing safety.
Image: Spacious Interior. This image highlights the generous interior space of the cat house, comfortably accommodating two cats, with key dimensions indicated.
Troubleshooting
If you encounter issues with your PETEMPO Outdoor Heated Cat House, please refer to the following common solutions:
- Heating Pad Not Turning On:
- Ensure the power cord is securely plugged into a functional outlet.
- Verify that the "ON/OFF" button is pressed and held for 3 seconds to activate.
- Check for any visible damage to the cord or controller.
- Insufficient Heat:
- Confirm the temperature setting is appropriate for the ambient conditions.
- Ensure the insulation cotton is properly installed around the heating pad for optimal heat retention.
- Check if the timer setting is too short, causing the pad to turn off prematurely.
- Structural Instability:
- Re-check all screw connections from the assembly steps to ensure they are tight.
- Ensure the cat house is placed on a flat and stable surface.
For further assistance, please contact customer support.
Specifications
| Feature | Detail |
|---|---|
| Model Number | POCH001 |
| Brand | PETEMPO |
| Product Dimensions (LxWxH) | 34.5 x 21.5 x 27.2 inches (87.6 x 54.6 x 69.1 cm) |
| Item Weight | 31.9 pounds (14.5 kg) |
| Material | Wood |
| Color | Grey |
| Heating Pad Temperature Range | 80°F – 136°F (26.6°C – 57.5°C) |
| Heating Pad Timer Settings | 4, 8, 12, 24 hours |
| Roof Weight Capacity | Up to 33 lbs (15 kg) |
| Insulation Thickness | 2cm pearl foam |
| Safety Certification | UL Certified Heating Pad |
Warranty and Support
The PETEMPO Outdoor Heated Cat House comes with a 1-year warranty from the date of purchase. This warranty covers manufacturing defects and material flaws under normal use conditions.
For warranty claims, technical support, or any questions regarding your product, please contact PETEMPO customer service through the retailer where the product was purchased or visit the official PETEMPO store online.
Visit the PETEMPO Store for more information.
