SMUG Small Computer Desk with 2 Drawers 40 Inch - Instruction Manual

1. Introduction

Welcome to your new SMUG Small Computer Desk. This manual provides essential information for the assembly, proper use, and maintenance of your 40-inch home office desk, which includes two fabric drawers and a versatile storage shelf. Please read these instructions thoroughly before beginning assembly or use to ensure safe and correct operation.

2. Important Safety Information

Adhering to these safety guidelines will help prevent injury and damage to the product:

• Always assemble the desk according to the provided instructions.
• Ensure that the desk is properly assembled and stable before use.
• Do not overload the desk, as this may cause instability or damage.
• Keep the desk away from heat sources and excessive moisture to prevent warping or material damage.
• In case of any damage or issues, contact our after-sale service team for assistance.

3. Package Contents

Before assembly, verify that all components listed in your specific assembly guide are present and undamaged. Typical components include:

• Desktop Panel
• Desk Legs (Metal Frame)
• Crossbars/Support Beams
• Fabric Drawers (2 units)
• Storage Shelf
• Headphone Hook
• Assembly Hardware (screws, bolts, Allen wrench, screwdriver)

If any parts are missing or damaged, please contact customer support immediately.

4. Assembly Instructions

This desk is designed for straightforward assembly. All components are clearly labeled to facilitate a step-by-step process. Please refer to the detailed assembly guide included in your package for specific instructions and diagrams.

1. Unpack and Identify Parts: Carefully unpack all components and lay them out on a clean, soft surface to prevent scratches. Identify each part using the provided labels and the assembly diagram.
2. Assemble the Frame: Attach the desk legs and crossbars according to the instructions. Ensure all connections are secure but do not overtighten screws until the frame is fully assembled.
3. Attach the Desktop: Secure the desktop panel to the assembled frame.
4. Install Storage Unit: The storage unit, including the shelf and drawer supports, can be installed on either the left or right side of the desk to suit your preference. Follow the instructions for your chosen orientation.
5. Insert Drawers and Shelf: Place the fabric drawers into their designated slots and position the adjustable shelf.
6. Final Tightening: Once all parts are in place and aligned, fully tighten all screws and bolts.
7. Attach Headphone Hook: Secure the headphone hook to the desired location on the desk frame.

5. Operating Instructions

Your SMUG computer desk is designed for functional use in various settings.

• Using the Drawers: The two fabric drawers provide enclosed storage for office supplies, documents, or personal items. Simply pull the handles to open and push to close.
• Adjustable Storage Shelf: The lower shelf offers open storage. For increased flexibility, the shelf height can be adjusted or removed by detaching the fabric drawers, allowing space for taller items like a computer tower or larger bins.
• Reversible Design: The entire storage unit can be detached and repositioned to install on either the left or right side of the desk. This adaptability allows you to optimize the desk's layout for your specific needs and room configuration.
• Headphone Hook: Utilize the integrated headphone hook on the side of the desk frame to keep your headphones or bags organized and within easy reach.

6. Maintenance and Care

To ensure the longevity and appearance of your SMUG desk, follow these simple care instructions:

• Cleaning: Wipe the desk surfaces with a dry, soft cloth. Avoid abrasive cleaners or harsh chemicals that could damage the finish.
• Spills: Immediately wipe up any spills to prevent water damage or staining.
• Heat and Moisture: Protect the desk from direct heat sources and excessive moisture. Use coasters for drinks and heat pads for hot items.
• Inspection: Periodically check all screws and connections to ensure they remain tight. Retighten if necessary.

7. Troubleshooting

If you encounter any issues during assembly or use, consider the following common solutions:

• Missing Parts: If you find any parts missing upon unboxing, refer to the package contents list in your assembly guide. Contact customer support with the specific part numbers for assistance.
• Damaged Parts: Should any component arrive damaged (e.g., cracked board, bent frame), do not proceed with assembly. Contact customer support for replacement parts.
• Difficulty with Assembly/Alignment: Ensure all parts are oriented correctly as per the assembly diagrams. Loosen screws slightly to adjust alignment, then retighten once everything fits properly. Avoid forcing components.
• Desk Instability: Check that all screws and bolts are fully tightened. Ensure the desk is placed on a level surface. Adjust any leveling feet if present.

For issues not resolved by these steps, please contact SMUG customer support.

8. Product Specifications

9. Customer Support and Warranty

SMUG is committed to providing quality products and excellent customer service. If you have any questions, require assistance with assembly, or encounter any issues with your desk, please do not hesitate to contact our professional after-sale service team.

Information regarding product warranty, if applicable, will be provided with your purchase documentation. Please retain your proof of purchase for any warranty claims.