Introduction
Thank you for choosing the MAHANCRIS DTHZ8201 Round Dining Table. This manual provides essential information for the safe assembly, proper use, and maintenance of your new dining table. Please read these instructions carefully before assembly and retain them for future reference.
Safety Information
- Always assemble the table on a soft, clean surface to prevent scratches.
- Ensure all screws and bolts are securely tightened before use. Periodically check and re-tighten as needed.
- Do not exceed the maximum weight capacity of 110 lbs (50 kg) for the tabletop.
- Keep small parts away from children during assembly to avoid choking hazards.
- Avoid placing hot items directly on the tabletop without protective mats.
- Do not stand or sit on the table.
Package Contents
Before beginning assembly, verify that all parts listed below are present and undamaged. If any parts are missing or damaged, please contact customer support.
- 1 x Round Tabletop (Walnut finish)
- 1 x Storage Shelf (Walnut finish)
- 4 x Metal Legs (Black finish)
- 1 x X-shaped Base Frame (Black finish)
- 1 x Accessory Kit (Includes screws, bolts, and adjustable feet)
- 1 x Assembly Guide (This document)
Figure 1: Product Dimensions and Weight Capacity. The table measures 31.5 inches in diameter and 29.5 inches in height, with a lower shelf of 15 inches diameter. It can support up to 110 lbs.
Assembly Instructions
Tools Required: Screwdriver (not included).
- Step 1: Attach Adjustable Feet to Legs. Carefully screw the adjustable feet into the bottom of each metal leg. Ensure they are snug but do not overtighten.
- Step 2: Assemble the X-shaped Base. Connect the four metal legs to form the X-shaped base frame using the provided screws and bolts from the accessory kit. Ensure the connections are secure.
- Step 3: Attach Storage Shelf. Position the storage shelf onto the designated supports on the metal legs. Secure it in place with the appropriate screws.
- Step 4: Attach Tabletop. Carefully place the round tabletop onto the top of the assembled leg structure. Align the pre-drilled holes on the tabletop with the holes on the leg frame. Secure the tabletop using the remaining screws.
- Step 5: Final Check. Gently lift and move the table to its desired location. Ensure all connections are tight and the table is stable. Adjust the feet as necessary to level the table on uneven surfaces.
Figure 2: Adjustable Feet and Sturdy X-Base. The adjustable feet allow for leveling on uneven floors, and the X-shaped base provides stability.
Operating Instructions
Using the Storage Shelf
The integrated two-tiered storage shelf is designed to hold various items such as placemats, napkins, condiments, or small decorative pieces. Distribute weight evenly on the shelf to maintain stability.
Figure 3: Open Storage Shelf. This shelf provides convenient space for dining essentials.
Adjusting for Stability
If the table wobbles, gently turn the adjustable feet at the bottom of the legs until the table is level and stable on your floor surface.
Maintenance and Care
- Cleaning: Wipe the tabletop and metal frame with a soft, damp cloth. Avoid harsh chemicals or abrasive cleaners, which can damage the finish.
- Spills: Clean spills immediately to prevent staining, especially on the engineered wood surface.
- Protection: Use coasters and placemats to protect the tabletop from heat, moisture, and scratches.
- Tightening: Periodically check all screws and bolts and re-tighten them to ensure the table remains stable and secure.
Figure 4: Easy-to-Clean Surface. The tabletop can be easily wiped clean with a damp cloth.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Table wobbles | Uneven floor surface or loose connections. | Adjust the leveling feet at the bottom of the legs. Check and tighten all screws and bolts. |
| Parts do not align during assembly | Incorrect orientation of parts or manufacturing variation. | Review the assembly steps and diagrams carefully. Ensure parts are oriented correctly. If issues persist, contact customer support. |
| Screws/bolts do not fit | Incorrect screw/bolt used or misaligned holes. | Verify you are using the correct hardware for each step as per the accessory kit. Ensure holes are properly aligned. Do not force screws. If a part is defective, contact customer support. |
| Scratches on surface | Damage during assembly or use. | Use a furniture repair kit for minor scratches. For significant damage, contact customer support. Always use protective mats. |
Specifications
- Model: DTHZ8201
- Brand: MAHANCRIS
- Product Dimensions: 31.5"D x 31.5"W x 29.5"H (80cm Dia. x 75cm H)
- Item Weight: 20 pounds (9.07 kg)
- Frame Material: Metal
- Top Material: Engineered Wood
- Color: Walnut and Black
- Shape: Round
- Seating Capacity: 2-4 people
- Special Features: Storage Shelf, Adjustable Feet, X-shaped Base
- Indoor/Outdoor Usage: Indoor
- Tools Recommended For Assembly: Screwdriver
Warranty and Support
MAHANCRIS stands behind the quality of its products. For any questions, missing parts, or issues not covered in this manual, please contact MAHANCRIS customer support. Please have your model number (DTHZ8201) and purchase information ready when contacting support.
For the most up-to-date warranty information, please refer to the product listing on the retailer's website or contact MAHANCRIS directly.