Introduction
The MSEBENT Tracker Tag is designed to help you locate your personal items using the Apple Find My network. This device is compatible with iOS devices only (iPhone, iPad) running iOS 14.5 / iPadOS 14.5 or later. It is ideal for tracking keys, wallets, luggage, backpacks, and other daily essentials.
This manual provides detailed instructions for setting up, operating, maintaining, and troubleshooting your MSEBENT Tracker Tag.
Image: Two MSEBENT Tracker Tags, one black and one white, shown with included keyrings.
Setup Instructions
1. Initial Pairing
To ensure successful pairing, do not remove the battery insulation tab until you are ready to set up the tracker. After removing the tab, the device must be paired within 10 minutes. If pairing is not completed within this timeframe, refer to the troubleshooting section.
Image: Illustration of the MSEBENT Tracker Tag with a "PULL REMOVE BEFORE USE" tab, emphasizing the 10-minute pairing window after tab removal.
2. Connecting to Apple Find My App
- Ensure Bluetooth is enabled on your iPhone or iPad.
- Open the Find My app on your iOS device.
- Tap the Items tab at the bottom of the screen.
- Tap the + icon, then select Add Other Item. Do not select "Add AirTag".
- The Find My app will search for nearby devices. When "MSETag" appears, tap Connect.
- Follow the on-screen prompts to link the tracker to your Apple ID and name your item.
- Once connected, the tracker will appear in your Find My app, allowing you to track its location.
Image: A series of iPhone screenshots illustrating the steps to connect the MSEBENT Tracker Tag to the Apple Find My app.
3. Video Guide: Easy Setup
Video: A demonstration of how to easily set up the MSEBENT Tracker Tag with an iPhone 15 Pro Max.
4. Holder Installation
To securely place the tracker tag in the included rubber holder, insert the tracker with the text side facing outward. The striped side of the tracker should face the inner wall of the rubber holder. Incorrect orientation (striped side facing outward) may cause the tracker to become loose.
Image: Visual guide on installing the tracker tag into its silicone case, highlighting IP67 protection when properly enclosed.
Operating Instructions
1. Locating Your Item
When your tracker is nearby, open the Find My app and select your item. You can then tap Play Sound to activate the built-in speaker, which can reach up to 70 dB in an open environment, helping you pinpoint its location. Sound performance may vary based on distance and surroundings.
Image: An iPhone displaying the Find My app, with a visual representation of sound waves emanating from a tracker tag to help locate it.
Image: A sequence of iPhone screenshots demonstrating the process of sharing item location information with friends through the Find My app.
2. Item Sharing
Each tracker tag can be shared within the Find My app with up to five additional people, totaling six users including the owner. This feature requires all users to have an Apple ID, be signed in to iCloud, and use a compatible iOS device (iOS 14.5 / iPadOS 14.5 or later). This allows family members or trusted individuals to collectively track shared items.
3. Item Left Behind Notifications
The Find My app can provide notifications if a tracked item is left behind or moves out of range. These alerts depend on your device settings and network conditions. Ensure your notification settings are configured appropriately in the Find My app.
Image: A collage illustrating diverse applications of the MSEBENT Tracker Tag, from securing wallets and keys to tracking luggage and musical instruments.
Maintenance
1. Battery Replacement
The MSEBENT Tracker Tag uses a user-replaceable CR2032 battery, offering an estimated battery life of 6 to 10 months, depending on usage. No monthly subscription is required for operation.
Image: A graphic highlighting the one-year battery life of the MSEBENT Tracker Tag, with black and white tags shown.
2. How to Open the Battery Cover
To open the battery cover, use a standard U.S. coin (e.g., 10-cent, 25-cent, or 50-cent) or a similar flat tool. Align the coin with the designated slot on the tracker. Twist it 45° clockwise, following the "Open" marking, to gently release the cover. (Coin or tool not included).
To secure the cover, align it with the "Close" marking and twist 45° counter-clockwise until it is firmly closed.
Image: Instructions on how to open the MSEBENT Tracker Tag's battery cover by twisting with a coin, indicating compatible coin sizes.
Image: An exploded view of the MSEBENT Tracker Tag, illustrating the replaceable CR2032 battery and internal components.
3. Water Protection
The tracker itself does not have waterproof protection. For protection against rain, splashes, or moisture, the included silicone case must be properly installed and fully enclose the tracker. Do not submerge the tracker in water, even with the silicone case.
Troubleshooting
1. Connection Issues After Tab Removal
If the tracker fails to connect within 10 minutes after removing the battery insulation sheet, follow these steps:
- Twist open the cover, remove the battery, wait 5-8 seconds, then reinstall the battery and close the cover. A beep indicates normal pairing readiness.
- If still not working, try one of the following methods to fully discharge the device before reinstallation:
- Method 1: Short the positive and negative terminals with a metal tool. Reinstall the battery after hearing the startup sound.
- Method 2: Leave the device idle for at least 5 minutes to fully discharge. Reinstall the battery after hearing the startup sound.
- Method 3: Briefly insert the battery in reverse polarity to short the terminals. Reinstall the battery after hearing the startup sound.
- After hearing the beep, ensure Bluetooth is on, open the Find My app, and select Add Other Item to complete the connection.
Image: A detailed troubleshooting guide for when the tracker tag does not connect after battery activation, including three methods for resetting the device.
2. Sound Alert Performance
The 70 dB sound alert's effectiveness can vary. Factors such as distance from the tracker, device settings, and surrounding environmental conditions (e.g., noise levels, obstructions) may affect how clearly the sound is heard.
Specifications
| Brand | MSEBENT |
| Model Number | MSE-01 |
| Product Dimensions | 1.22"L x 1.22"W x 0.38"Th (31 x 31 x 9.7 mm) |
| Item Weight | 20 g |
| Compatible Devices | Apple iOS devices (iPhone, iPad) with iOS 14.5 / iPadOS 14.5 or later |
| Battery Type | CR2032 Lithium Metal (included) |
| Battery Life (Average) | 6-10 months (up to 12 months) |
| Battery Serviceability | Replaceable |
| Connectivity Technology | Bluetooth |
| Control Method | App (Apple Find My) |
| Water Protection | IP67 (with silicone case properly installed) |
| UPC | 774882486756 |
Image: A visual breakdown of the MSEBENT Tracker Tag kit, showing the tag, silicone case, key chain, CR2032 battery, and manual, along with dimensions.
Warranty Information
The MSEBENT Tracker Tag comes with a 2-Year Manufacturer Warranty. Please retain your proof of purchase for warranty claims.
Customer Support
For any questions regarding setup, connection, battery replacement, holder installation, or general daily use, please contact our customer support team. Refer to the product packaging or the retailer's website for specific contact details.