AMIRO HydraGlow Booster Facial Device Instruction Manual

1. Introduction

The AMIRO HydraGlow Booster Facial Device is designed to enhance skin firmness and radiance through advanced technologies. This portable at-home LED beauty device works in conjunction with AMIRO PDRN Serum to optimize skin absorption and promote a revitalized complexion. It integrates microcurrent, red light, and infrared energy to support skin health and appearance.

2. Safety Information

• Read all instructions before using the device.
• Do not use on broken, irritated, or infected skin.
• Consult a physician before use if you have any medical conditions, including but not limited to epilepsy, heart conditions, or if you are pregnant.
• Keep out of reach of children.
• Use only with the recommended AMIRO PDRN Serum.
• Do not immerse the device in water, except for the detachable head as instructed for cleaning.

3. Package Contents

Your AMIRO HydraGlow Booster package includes the following items:

• AMIRO HydraGlow Booster Facial Device (Model ABS004)
• User Manual
• Charging Cable

4. Device Overview

The AMIRO HydraGlow Booster combines several technologies to deliver comprehensive skin care:

• Microcurrent Technology: Gently stimulates skin pathways to boost absorption of active ingredients and energize skin cells.
• Red Light Therapy: Supports collagen production and refines skin texture for a smoother, more luminous appearance.
• Infrared Energy: Penetrates deeper to improve circulation and vitality, promoting a healthy complexion.

5. Setup

Before first use, ensure the device is fully charged using the provided charging cable.

1. Take a single-use AMIRO PDRN Serum pod.
2. Remove the cap from the serum pod.
3. Insert the serum pod into the designated slot on the device.

6. Operating Instructions

Follow these steps for optimal use of your AMIRO HydraGlow Booster:

1. Hold the power button for 3 seconds to turn the device on.
2. Press the button 3 times to prime the device and dispense the serum.
3. Press the device once per area of your skin.
4. Gently glide the device back and forth 4-5 times over the area until the serum is fully absorbed.
5. For first use, press 2-3 times to prime, then press once per area and glide back & forth 4-5 times until absorbed. Each pod lasts for about 5 presses.

7. Maintenance

Proper maintenance ensures the longevity and hygiene of your device:

• After each use, rinse the detachable, washable head and the body of the device with water.
• Air dry the device in a cool, well-ventilated place.

8. Troubleshooting

• Device not turning on: Ensure the device is fully charged. If the issue persists, contact customer support.
• Serum not dispensing: Ensure the serum pod is correctly inserted and primed by pressing the button 3 times.
• No sensation during use: Verify that the device is powered on and making full contact with your skin. Ensure sufficient serum is applied to facilitate conductivity.

9. Specifications

10. Warranty and Support

For warranty information and customer support, please refer to the official AMIRO website or contact your retailer. Keep your purchase receipt as proof of purchase for any warranty claims.