1. Introduction
Thank you for choosing the PaiPaitek PD519V No Shock Dog Training Collar. This device is designed to assist in humane and effective dog training through sound and vibration, without causing harm or discomfort. Please read this manual thoroughly before use to ensure proper operation and to maximize the training benefits for your dog.
2. Product Overview
Key Features:
- 100% No Shock & No Prongs: Utilizes only safe sound and vibration for humane training.
- 3 Customizable Training Modes: Beep (9 tones), Vibration (1-9 levels), and Beep + Vibration combo (1-9 levels).
- Extended Remote Range: Up to 3300ft for reliable training in open areas.
- Waterproof Design: IPX7 waterproof receiver and IPX3 water-resistant remote for outdoor use.
- Long Battery Life: Fast charging (2 hours) provides up to 20 days of battery life.
- Adjustable Collar: Fits dogs from 5-120 lbs with neck sizes from 8–27 inches.
- Multi-Dog Control: Control up to 3 dogs with a single remote, each with independent settings.
- Safety Lock: Prevents accidental activation of the remote.
Package Contents:
- Remote Transmitter
- Receiver Collar
- Adjustable Nylon Strap
- Dual Charging Cable
- User Manual
Image: PaiPaitek PD519V No Shock Dog Training Collar with Remote and Receiver.
3. Safety Instructions
- This training collar is intended for dogs only. Do not use it on humans or other animals.
- Always ensure the collar is fitted correctly. It should be snug enough to allow two fingers to fit comfortably between the collar and your dog's neck.
- Do not leave the collar on your dog for more than 12 hours a day to prevent skin irritation.
- Regularly check your dog's neck for any signs of irritation or sores. If irritation occurs, discontinue use and consult a veterinarian.
- This collar is a training aid, not a punishment device. Use it responsibly and humanely.
- Avoid using the collar on aggressive dogs. Consult a professional dog trainer for such cases.
- Keep out of reach of children.
4. Setup
4.1 Charging the Device
Both the remote and the receiver collar are rechargeable. Use the provided dual charging cable to charge both units simultaneously. A full charge takes approximately 2 hours.
- Connect the dual charging cable to a USB power adapter (not included).
- Plug one end of the cable into the remote's charging port and the other into the receiver's charging port.
- The indicator lights on both devices will show charging status (refer to device indicators for specific details).
- Once fully charged, disconnect the cable.
Image: The remote and receiver collar connected to the dual charging cable.
4.2 Assembling the Collar Strap
The receiver unit needs to be threaded onto the adjustable nylon strap.
- Thread the collar strap through the two slots on the receiver unit.
- Adjust the strap length to fit your dog's neck comfortably and securely.
- Ensure the receiver is centered on your dog's throat.
Image: Detailed view of hands assembling the collar strap with the receiver unit.
Video: Instructions on how to properly wear the collar strap on your dog.
4.3 Pairing Remote and Receiver
The remote and receiver need to be paired for communication. Follow these steps:
- Turn on the receiver by pressing its power button.
- Press and hold the receiver's power button until its indicator light flashes rapidly (usually red).
- On the remote, select the desired channel (1, 2, or 3) if training multiple dogs.
- Press the vibration button on the remote. The receiver will vibrate, and its light will turn solid, indicating successful pairing.
- Press the tone button on the remote to confirm pairing with an audible beep from the receiver.
Video: Step-by-step guide on how to pair the remote control with the receiver collar.
5. Operating Instructions
5.1 Training Modes
The PaiPaitek PD519V offers three humane training modes:
- Beep Mode: Emits an audible tone (9 different tones available).
- Vibration Mode: Delivers a gentle vibration (9 intensity levels available).
- Beep + Vibration Combo Mode: Combines an audible tone with vibration (9 intensity levels available).
Use the dedicated buttons on the remote to activate each mode. Adjust the intensity levels using the +/- buttons on the remote.
Image: The remote control showing the three available training modes: Sound, Vibration, and Sound + Vibration.
5.2 Multi-Dog Training
The remote can control up to three receiver collars simultaneously. Each channel (1, 2, 3) saves its own settings.
- To switch between dogs, press the 'CH' button on the remote. The display will show the active dog channel.
- Pair each additional receiver collar to a different channel following the pairing instructions in Section 4.3.
Image: Illustration of training three dogs with one remote control.
5.3 Remote Safety Lock
To prevent accidental activation, the remote features a safety lock. Slide the lock switch on the side of the remote to engage or disengage the lock.
Image: The remote control with its safety lock feature clearly visible.
5.4 Automatic Anti-Barking Function
The receiver collar may have an automatic anti-barking function. This feature can be toggled on or off.
- To turn off the automatic anti-barking function, press and hold the 'A' button on the receiver for 3 seconds. You will hear two beeps.
- To turn on the automatic anti-barking function, press and hold the 'A' button on the receiver for 3 seconds. You will hear one beep.
- You can also short press the 'A' button to check the sensitivity level, indicated by the number of beeps.
Video: Demonstration of how to turn on and turn off the automatic anti-barking function on the collar.
6. Maintenance
- Cleaning: Regularly clean the receiver and remote with a soft, damp cloth. Avoid harsh chemicals.
- Battery Care: To prolong battery life, avoid fully discharging the devices frequently. Charge them when the battery indicator is low.
- Storage: Store the device in a cool, dry place when not in use.
7. Troubleshooting
7.1 Checking Receiver Battery Level
To check the battery level of the receiver, press the power button twice in a row. The number of beeps indicates the battery charge:
- 5 Beeps: Above 80%
- 4 Beeps: Above 60%
- 3 Beeps: Above 40%
- 2 Beeps: Above 20%
- 1 Beep: Below 20%
Video: Guide on how to test the power level of the receiver unit.
7.2 Common Issues and Solutions
- Device not turning on: Ensure both the remote and receiver are fully charged.
- Remote not controlling receiver: Re-pair the remote and receiver following the instructions in Section 4.3. Ensure they are on the same channel.
- Short range: Ensure there are no large obstacles between the remote and receiver. Check for strong electromagnetic interference.
- No response from receiver: Check battery level. Ensure the collar is fitted correctly and the receiver is not obstructed.
8. Specifications
| Feature | Detail |
|---|---|
| Model Number | PD519V |
| Brand | Paipaitek |
| Training Modes | Beep (9 tones), Vibration (1-9 levels), Beep + Vibration (1-9 levels) |
| Remote Range | Up to 3300 feet |
| Receiver Waterproof Rating | IPX7 |
| Remote Water Resistance | IPX3 |
| Battery Life | Up to 20 days (receiver and remote) |
| Charging Time | Approx. 2 hours |
| Dog Weight Range | 5-120 lbs |
| Collar Neck Size | 8-27 inches |
| Material | Nylon |
9. Warranty and Support
PaiPaitek products are tested to meet stringent quality standards and are covered by a 12-month warranty from the date of original purchase. This warranty covers defects in materials and workmanship under normal use.
For warranty claims, technical support, or any product-related inquiries, please contact PaiPaitek customer service. Please provide your order ID and a detailed description of the issue for prompt assistance.
Email: service20220613@gmail.com
