Introduction
Thank you for choosing the HIPIHOM 7-Piece Dining Table Set. This manual provides essential information for the safe assembly, operation, and maintenance of your new dining set. Please read these instructions carefully before assembly and retain them for future reference.
Image: The HIPIHOM 7-Piece Dining Table Set, featuring a grey rectangular table and six black upholstered chairs, arranged in a dining room setting.
Safety Information
- Avoid placing heavy items on the table to prevent tip-over.
- Do not exceed the weight capacity of 330 lbs per chair.
- Do not place hot items directly on the tabletop to prevent damage. Always use coasters or placemats.
- Ensure all screws and bolts are tightened securely before use and periodically check for tightness.
- Keep small parts away from children during assembly to prevent choking hazards.
Package Contents
Before assembly, verify that all components are present and undamaged. If any parts are missing or damaged, please contact customer support.
- 1 x Dining Table Top
- 2 x Table Legs
- 6 x Dining Chairs (Seat, Backrest, Legs for each chair)
- Hardware Pack (Screws, bolts, washers, Allen wrench)
- Installation Guide
Note: The table and chairs may be shipped in multiple boxes and might arrive separately.
Image: A diagram illustrating the dimensions of the dining table (70.88"D x 31.51"W x 29.94"H) and dining chairs (14.32"W x 16.12"D x 32.82"H) along with their respective weight capacities (Table: 260 lbs, Chair: 330 lbs).
Assembly Instructions
Assembly requires two adults. Please follow these steps carefully:
- Table Assembly:
- Unpack all table components and lay them on a soft, clean surface to prevent scratches.
- Attach the table legs to the tabletop using the provided screws and tool. Ensure proper alignment.
- Tighten all fasteners securely. Do not overtighten.
- Carefully flip the assembled table upright.
- Chair Assembly (Repeat for each of the 6 chairs):
- Unpack all chair components.
- Insert the chair backrest into the seat.
- Secure the backrest to the seat using the provided screws.
- Assemble the chair legs and attach them to the seat and backrest frame.
- Ensure all parts are tightly secured before using the chair.
Adjustable leg pads are included to help stabilize the table on uneven floors and prevent scratches.
Image: A close-up view of an adjustable foot pad located at the base of a table leg, designed to ensure stability on uneven surfaces and protect flooring.
Usage and Features
This 7-piece dining set is designed for comfortable dining for up to 6 people. The robust construction ensures durability for daily use.
Table Features:
- Thick MDF Tabletop: Crafted from high-quality MDF with a thickness of 1.97 inches for durability and a premium feel.
- Strong Metal Legs: Provides stable support, capable of holding up to 260 lbs.
- Adjustable Leg Pads: Keeps the table level on uneven floors and prevents scratches.
Image: A detailed view of the dining table highlighting its construction, including the MDF material, the 1.97-inch thick tabletop, and the solid structural design.
Chair Features:
- PU Leather Upholstery: High-quality, skin-friendly, and waterproof PU leather for easy cleaning and comfort.
- Ergonomic Curved Backs: Designed for optimal comfort during meals.
- High Elastic Sponge: Provides soft yet supportive seating.
- U-shaped Metal Legs: Offers stable and sturdy support, with a weight capacity of 330 lbs per chair.
Image: A detailed view of a dining chair, showcasing its features such as waterproof PU leather, the quality of its construction, high-density sponge padding, and sturdy metal legs.
Care and Maintenance
- Cleaning: Wipe the table and chairs with a damp cloth. For stubborn stains on PU leather, use a mild soap solution and wipe dry immediately. Avoid harsh chemicals or abrasive cleaners.
- Spills: Clean spills immediately to prevent staining, especially on the tabletop.
- Protection: Use placemats and coasters to protect the tabletop from heat, scratches, and spills.
- Inspection: Periodically check all bolts and screws to ensure they remain tight. Retighten as necessary.
- Environment: Avoid prolonged exposure to direct sunlight or extreme temperature changes, which can affect the material.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Table/Chair wobbles | Uneven floor; Loose fasteners | Adjust the leg pads on the table. Tighten all screws and bolts on the table and chairs. |
| Difficulty assembling | Incorrect part orientation; Missing hardware | Refer to the detailed assembly guide. Ensure parts are oriented correctly. Check hardware pack for all components. Contact support if parts are missing. |
| Scratches on floor | Missing or damaged leg pads | Ensure all leg pads are properly installed. Replace damaged pads if necessary. |
Product Specifications
| Feature | Detail |
|---|---|
| Model Number | JA25003 |
| Table Dimensions (L x W x H) | 70.88" x 31.51" x 29.94" |
| Chair Dimensions (W x D x H) | 14.32" x 16.12" x 32.82" |
| Tabletop Thickness | 1.97 inches |
| Table Weight Capacity | 260 lbs |
| Chair Weight Capacity | 330 lbs per chair |
| Materials | Engineered Wood (MDF Tabletop), Metal (Legs), PU Leather (Chair Upholstery), High Elastic Sponge (Chair Padding) |
| Color | Grey Table with Black Chairs |
| Item Weight | 70.6 pounds (total package weight may vary) |
Warranty Information
HIPIHOM products are manufactured with quality and care. This product comes with a standard manufacturer's warranty against defects in materials and workmanship. Please retain your proof of purchase for warranty claims. For specific warranty terms and conditions, refer to the documentation included with your purchase or contact HIPIHOM customer support.
Customer Support
If you have any questions, require assistance with assembly, or need to report missing/damaged parts, please contact HIPIHOM customer support. Our team is available to help you.
- Online Support: Visit the official HIPIHOM store on Amazon for FAQs and contact options.
- Email: Refer to your purchase documentation for direct email support.