1. Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of your Moen Findlay 4-Inch Centerset Bathroom Faucet, model 84515SRN. This faucet features a Spot Resist Brushed Nickel finish, dual handles for precise control, and a spring-loaded drain for a streamlined appearance. It is designed for efficient water usage and compliance with safety standards.
Image: The Moen Findlay faucet installed on a bathroom sink, showcasing its design and brushed nickel finish.
2. Important Safety Information
- Always shut off the main water supply before beginning any installation or repair work.
- Wear safety glasses to protect your eyes during installation.
- If you are unsure about any part of the installation process, it is recommended to consult a qualified plumber.
- Ensure all connections are secure to prevent leaks. Do not overtighten.
3. Package Contents
Verify that all components are present before beginning installation:
- Faucet Assembly
- Valve
- Drain Assembly
- Installation Instructions (this document)
Image: A diagram illustrating the Moen Findlay faucet's key dimensions and installation requirements, including spout reach, faucet height, and connection details.
4. Setup and Installation
4.1 Pre-Installation
- Gather necessary tools: adjustable wrench, plumber's putty or silicone sealant, screwdriver, flashlight, safety glasses.
- Turn off the water supply to the sink at the shut-off valves under the sink or at the main water supply.
- Clear the area under the sink for easy access.
4.2 Faucet Installation
- Position the faucet assembly onto the sink deck, ensuring the handles are correctly aligned with the hot and cold water holes. This faucet is designed for 3-hole, 4-inch centerset installations.
- From underneath the sink, secure the faucet using the provided mounting hardware. Hand-tighten first, then use a wrench to snug the nuts, being careful not to overtighten.
- Connect the hot and cold water supply lines to the corresponding inlets on the faucet valve. Use an adjustable wrench to tighten connections, ensuring a watertight seal.
4.3 Drain Assembly Installation
- Apply plumber's putty or silicone sealant around the flange of the drain body and insert it into the drain opening of the sink.
- From underneath the sink, attach the rubber washer, friction washer, and mounting nut to the drain body. Tighten securely.
- Connect the tailpiece of the drain assembly to the P-trap.
- The spring-loaded drain operates by pushing down on the stopper to close and pushing again to open.
4.4 Post-Installation
- Slowly turn on the hot and cold water supply valves.
- Check all connections for leaks. If leaks occur, tighten the connections slightly until they stop.
- Remove the aerator from the faucet spout and turn on the water to flush out any debris from the lines. Run water for approximately one minute.
- Turn off the water, reattach the aerator, and test the faucet operation.
5. Operating Instructions
The Moen Findlay faucet features two lever handles for precise control over water temperature and flow.
- Water Flow: Lift either handle to increase water flow. Push down to decrease or stop flow.
- Temperature Control: The left handle controls hot water, and the right handle controls cold water. Adjust both handles to achieve the desired water temperature.
- Spring-Loaded Drain: To close the drain, press down firmly on the drain stopper. To open the drain, press down on the stopper again.
6. Maintenance
To maintain the appearance and performance of your Moen Findlay faucet, follow these cleaning and care guidelines:
- Cleaning the Finish: The Spot Resist Brushed Nickel finish is designed to resist fingerprints and water spots. Clean the faucet regularly with a soft, damp cloth and mild soap.
- Avoid Harsh Cleaners: Do not use abrasive cleaners, harsh chemicals, or polishes containing alcohol, ammonia, or abrasives, as these can damage the finish.
- Aerator Maintenance: If water flow decreases, the aerator may be clogged. Unscrew the aerator from the spout, clean any debris, and rinse thoroughly before reattaching.
Image: A visual demonstration of Moen's Spot Resist Technology, highlighting its effectiveness in preventing fingerprints and water spots compared to a standard finish.
7. Troubleshooting
Refer to the following table for common issues and their solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Low water flow | Clogged aerator; partially closed shut-off valves; debris in water lines. | Clean or replace aerator; fully open shut-off valves; flush water lines. |
| Leaks at connections | Loose connections; worn washers. | Tighten connections (do not overtighten); replace washers if damaged. |
| Water temperature issues | Incorrect handle adjustment; issues with water heater. | Adjust handles for desired temperature; check water heater settings. |
| Drain stopper not sealing | Debris in drain; stopper mechanism issue. | Clear debris from drain; ensure stopper is properly seated. |
If you encounter problems not listed here or if the suggested solutions do not resolve the issue, please contact Moen customer support.
8. Specifications
| Feature | Detail |
|---|---|
| Model Number | 84515SRN |
| Brand | Moen |
| Finish Type | Brushed Nickel (Spot Resist) |
| Material | Zinc (Handle Material: Metal) |
| Mounting Type | Deck Mount |
| Number of Handles | 2 |
| Hole Count | 3 |
| Installation Type | Centerset (4-inch) |
| Maximum Flow Rate | 1.2 Gallons Per Minute (GPM) |
| Product Dimensions | 4"D x 10"W x 5.75"H |
| Special Features | Spot Resist finish, Spring-loaded drain, WaterSense certified |
| WaterSense Certified | Yes |
| Safety Standards | Complies with Federal Safe Drinking Water Act and NSF 61 standards |
Image: Certification mark indicating that Moen products meet U.S. Water Safety Standards, ensuring clean and safe drinking water.
9. Warranty and Support
9.1 Limited Lifetime Warranty
Your Moen Findlay faucet is backed by Moen's Limited Lifetime Warranty. This warranty covers defects in material and manufacturing workmanship for the original consumer purchaser. For full details regarding the warranty, please refer to the official Moen warranty documentation or visit the Moen website.
9.2 Customer Support
For technical assistance, replacement parts, or warranty claims, please contact Moen customer support. Contact information can typically be found on the Moen official website or on the product packaging.
When contacting support, please have your model number (84515SRN) and date of purchase available.
