1. Introduction
Thank you for choosing the HOMCOM Shoe Cabinet. This manual provides essential information for the safe assembly, operation, and maintenance of your new shoe storage unit. Please read these instructions carefully before assembly and retain them for future reference.
The HOMCOM Shoe Cabinet is designed to provide organized storage for your footwear in entryways and hallways. This unit features a bohemian rattan style with an oak effect top and four fold-down drawers, capable of storing up to 20 pairs of shoes.

Image 1.1: The HOMCOM Shoe Cabinet in an entryway setting, showcasing its design and functionality.
2. Safety Information
- Anti-Tip Device: This shoe cabinet is equipped with an anti-tip kit. It is crucial to secure the unit to a wall using the provided anti-tip hardware to prevent accidental tipping, especially in households with children or pets.
- Weight Capacity: Do not exceed the maximum recommended load of 50 kg (total) or 10 kg per tray/drawer. Overloading can compromise stability and cause damage.
- Assembly: Assembly should be performed by at least two adults. Ensure all parts are correctly installed and fasteners are tightened securely before use.
- Placement: Place the cabinet on a flat, stable, and level surface. Avoid placing it in areas with high humidity or direct sunlight.
- Children: Keep small parts and packaging materials away from children during assembly. Do not allow children to climb on or play with the cabinet.

Image 2.1: Illustration of the anti-tip safety feature, emphasizing the importance of securing the cabinet to the wall.
3. Package Contents
Before beginning assembly, please verify that all components listed below are present and undamaged. If any parts are missing or damaged, do not proceed with assembly and contact customer support.
- Cabinet Panels (Top, Bottom, Sides, Back)
- 4 x Fold-down Drawers
- 8 x Adjustable Shelves (2 per drawer)
- Hardware Pack (Screws, dowels, cam locks, anti-tip kit, handles)
- Assembly Instructions Manual
4. Setup and Assembly
Assembly of this shoe cabinet is required. It is recommended to have at least two people for assembly. The process typically takes approximately 2 hours for one person, so plan accordingly.
4.1 Tools Required (Not Included)
- Phillips Head Screwdriver
- Hammer (for dowels)
- Drill (for anti-tip kit wall attachment, if needed)
- Measuring Tape
4.2 Assembly Steps
- Unpack and Identify: Lay out all components on a clean, soft surface (e.g., a blanket or carpet) to prevent scratches. Identify each part using the provided parts list in the separate assembly guide.
- Assemble Frame: Follow the step-by-step diagrams in the assembly guide to construct the main frame of the cabinet. Ensure all cam locks and screws are tightened.
- Install Drawers: Assemble the four fold-down drawers according to the instructions. Pay close attention to the orientation of the drawer mechanisms.
- Insert Shelves: Place the adjustable shelves into the drawers. The shelves can be adjusted to two levels to accommodate different shoe heights.
- Attach Handles: Secure the handles to the front of each drawer.
- Install Anti-Tip Kit: This is a critical safety step. Attach the anti-tip bracket to the top rear of the cabinet and then secure it to a solid wall stud using appropriate hardware. Ensure the cabinet is stable and cannot tip forward.

Image 4.1: Key dimensions and maximum weight capacity of the shoe cabinet.
5. Operating Instructions
5.1 Storing Shoes
- Each of the four fold-down drawers can store approximately 5 pairs of shoes, for a total capacity of up to 20 pairs (up to EU size 43).
- To open a drawer, gently pull the handle. The drawer will tilt forward, revealing two tiers for shoe placement.
- Place shoes neatly on the shelves. Ensure shoes are not protruding, which could prevent the drawer from closing properly.
- To close, push the drawer back into the cabinet until it is flush with the cabinet front.

Image 5.1: The four fold-down drawers open, demonstrating the capacity for storing multiple pairs of shoes.
5.2 Adjustable Shelves
- Each drawer contains two adjustable shelves. These can be set at two different heights to accommodate various types of footwear, such as flats, sneakers, or heels.
- To adjust a shelf, carefully remove it from its current position and re-insert it into the desired slot. Ensure both sides of the shelf are securely seated.

Image 5.2: Detail of the adjustable shelves, illustrating their flexibility for various shoe types.
5.3 Top Surface Use
- The oak effect top surface of the cabinet can be used to place decorative items, keys, plants, or other small objects.
- Do not place excessively heavy items on the top surface to avoid exceeding the weight capacity.

Image 5.3: The cabinet's top surface used for decorative display, enhancing its functionality in an entryway.
6. Maintenance
- Cleaning: Wipe the cabinet surfaces with a soft, damp cloth. Avoid using harsh chemicals or abrasive cleaners, as these can damage the finish.
- Rattan Care: For the rattan effect doors, gently dust with a soft brush or cloth. Avoid excessive moisture.
- Inspection: Periodically check all fasteners and connections to ensure they remain tight. Re-tighten if necessary.
- Spills: Clean up any spills immediately to prevent staining or damage to the engineered wood.
7. Troubleshooting
- Cabinet is Wobbly: Ensure the cabinet is placed on a level surface. Check all assembly screws and cam locks for tightness. Verify the anti-tip kit is securely installed.
- Drawers Not Closing Properly: Check for any shoes or objects obstructing the drawer mechanism. Ensure the adjustable shelves are correctly seated. Verify that the drawer assembly is correct.
- Damaged Parts: If any part arrives damaged or becomes damaged during assembly, do not attempt to force it. Contact HOMCOM customer support for replacement parts.
8. Specifications
| Model Number | 837-602V02WT |
| Brand | HOMCOM |
| Color | White, Oak (top) |
| Material | Engineered Wood (Particle Board) |
| Overall Dimensions (L x D x H) | 105 cm x 24 cm x 95.5 cm (41.34"W x 9.45"D x 37.6"H) |
| Drawer Interior Dimensions (L x D x H) | 43.5 cm x 26 cm x 31 cm (each) |
| Bottom Height (from floor) | 13 cm |
| Shoe Capacity | Up to 20 pairs (max EU size 43) |
| Max. Total Load Capacity | 50 kg |
| Max. Drawer/Tray Load Capacity | 10 kg |
| Number of Drawers | 4 |
| Number of Adjustable Shelves | 8 (2 per drawer) |
| Assembly Required | Yes |
| Item Weight | 23.2 Kilograms |
9. Warranty and Support
For any questions regarding assembly, missing parts, or product defects, please contact HOMCOM customer support. Refer to your purchase documentation for specific warranty terms and contact information.
You can typically find support contact details on the HOMCOM official website or through the retailer where you purchased the product.