Introduction
This manual provides detailed instructions for the Urbanista Santa Monica Adaptive Noise Cancelling Earbuds, Model 1037742. Please read this guide thoroughly to ensure proper setup, operation, and maintenance of your device.
Package Contents
Upon opening your Urbanista Santa Monica package, verify that all the following items are included:
- Urbanista Santa Monica Earbuds
- Wireless Charging Case
- Ear Cushions
- Quickstart guide
- Legal documentation
Setup
1. Initial Charging
Before first use, fully charge your Urbanista Santa Monica earbuds and charging case.
- Place the earbuds into the charging case.
- Connect the charging case to a power source using a compatible USB-C cable. The charging time is approximately 2 hours for a full charge.
- The LED indicator on the case will show charging status.
Image: Urbanista Santa Monica earbuds placed in their charging case, ready for charging.
2. Bluetooth Pairing
To connect your earbuds to a device:
- Ensure the earbuds are in the charging case and the case lid is open.
- Activate Bluetooth on your device (e.g., smartphone, laptop, tablet).
- In your device's Bluetooth settings, search for "Urbanista Santa Monica" and select it to pair.
- A confirmation sound or indicator will signify successful pairing.
Image: The Urbanista Santa Monica earbuds resting inside their open charging case, ready for pairing.
Operating Instructions
Wearing the Earbuds
The Urbanista Santa Monica earbuds feature an open-fit ergonomic design for comfortable listening. Insert each earbud gently into your ear canal.
Image: A person wearing an Urbanista Santa Monica earbud, demonstrating proper fit.
Touch Controls
The earbuds are equipped with touch controls for various functions. Specific gestures may vary; refer to the quickstart guide for a complete list. Common functions include:
- Play/Pause: Single tap on either earbud.
- Next Track: Double tap on the right earbud.
- Previous Track: Double tap on the left earbud.
- Answer/End Call: Single tap on either earbud.
- Activate Voice Assistant: Triple tap on either earbud.
- Toggle ANC/Transparency Mode: Long press on either earbud.
Image: A close-up view of an Urbanista Santa Monica earbud, highlighting the touch control surface.
Adaptive Noise Cancelling (ANC)
The Santa Monica earbuds feature Adaptive Noise Cancelling technology. This system scans your ear canals and ambient environment to optimize noise reduction, filtering out unwanted sounds up to 30 dB.
To activate or deactivate ANC, use the designated touch control gesture (typically a long press).
Image: A conceptual diagram showing how Adaptive Noise Cancelling technology works around the earbud.
Multipoint Connection
The earbuds support multipoint connection, allowing them to be simultaneously connected to two Bluetooth devices. To utilize this feature:
- Pair the earbuds with the first device.
- Disconnect from the first device's Bluetooth settings (do not unpair).
- Pair the earbuds with the second device.
- Reconnect to the first device from its Bluetooth settings. The earbuds should now be connected to both devices.
Call Management
The Urbanista Santa Monica earbuds feature six microphones (three per earbud) and wind-noise reduction for clear calls.
- Answer/End Call: Single tap on either earbud.
- Reject Call: Long press on either earbud.
Image: A detailed view of the microphone placement on an Urbanista Santa Monica earbud, designed for clear calls.
Maintenance
Cleaning
- Gently wipe the earbuds and charging case with a soft, dry, lint-free cloth.
- Do not use abrasive cleaners, alcohol, or chemical solvents.
- Ensure charging contacts are clean and dry before placing earbuds in the case.
Storage
When not in use, store the earbuds in their charging case to protect them and ensure they remain charged. Store in a cool, dry place away from direct sunlight and extreme temperatures.
Water Resistance
The Urbanista Santa Monica earbuds are water resistant. This means they can withstand splashes and light rain, but they are not designed for submersion in water. Avoid exposing them to high-pressure water or prolonged contact with water.
Troubleshooting
No Sound / Disconnection
- Ensure earbuds are charged.
- Verify Bluetooth is enabled on your device and the earbuds are connected.
- Try placing the earbuds back in the case, closing the lid, and then reopening to reset the connection.
- If issues persist, unpair "Urbanista Santa Monica" from your device's Bluetooth list and re-pair.
Charging Issues
- Check the charging cable and power adapter.
- Ensure the charging contacts on both the earbuds and the case are clean and free of debris.
- Confirm the earbuds are correctly seated in the charging case.
Adaptive Noise Cancelling Not Working
- Ensure ANC is activated via touch control.
- Check for any obstructions on the earbud microphones or sensors.
- A proper fit in the ear is crucial for optimal ANC performance.
Specifications
| Model Name | Santa Monica |
| Model Number | 1037742 |
| Connectivity Technology | Wireless (Bluetooth) |
| Bluetooth Version | 6.0 |
| Noise Control | Adaptive Noise Cancelling (ANC) |
| Drivers | 13 mm Dynamic Drivers with Bio-fiber Diaphragms |
| Microphones | 6 (3 per earbud) with Wind-Noise Reduction |
| Playtime (Earbuds) | Up to 4 hours (3 hours with ANC enabled) |
| Total Playtime (with Case) | Up to 24 hours (16.5 hours with ANC enabled) |
| Charging Time | Approximately 2 hours |
| Control Type | Touch Control |
| Water Resistance Level | Water Resistant |
| Item Weight | 41.4 Grams |
| Battery Cell Composition | Lithium Ion |
| Compatible Devices | Cellphones, Laptops, Tablets |
Warranty and Support
For warranty information and customer support, please refer to the legal documentation included in your package or visit the official Urbanista website.
Manufacturer: Urbanista
Model: 1037742
ASIN: B0FNFCVCSQ
