1. Introduction
Thank you for choosing the Pinmoco 63 Inch Large Fireplace TV Stand. This modern entertainment center is designed to accommodate TVs up to 70 inches and features a 23-inch electric fireplace with RGB LED lights, offering both aesthetic appeal and functional storage. This manual provides essential information for safe assembly, operation, and maintenance of your new TV stand.
2. Important Safety Information
Please read all instructions carefully before assembly and use. Failure to follow these instructions may result in injury or product damage.
- Keep all packaging materials away from children.
- Ensure all parts are present and undamaged before beginning assembly. Do not use if any parts are missing or damaged.
- Assemble the unit on a soft, clean surface to prevent scratches.
- Do not overtighten screws during assembly.
- This TV stand is designed for indoor use only.
- Do not exceed the maximum weight capacity for the top surface or shelves. Refer to specifications for details.
- The electric fireplace is an electrical appliance. Ensure it is connected to a properly grounded outlet. Do not overload circuits.
- Keep flammable materials at least 3 feet (0.9 meters) away from the front of the electric fireplace.
- Never block the air vents of the electric fireplace.
- Unplug the electric fireplace from the power outlet before cleaning or performing any maintenance.
3. Package Contents
Before assembly, verify that all components listed in the included parts diagram are present. If any parts are missing or damaged, contact customer support immediately.
Typical package contents include:
- Wooden panels (top, bottom, side, shelves, back)
- Hardware pack (screws, dowels, cam locks, hinges, handles)
- Electric fireplace insert
- RGB LED light strip and remote control
- Instruction manual
4. Assembly and Setup
Assembly typically requires two adults. Tools required: Phillips head screwdriver, hammer (optional, for dowels), and a soft cloth or blanket to protect surfaces.
4.1 Assembly Steps
- Unpack all components and lay them out on a clean, soft surface.
- Identify each part using the provided parts list.
- Attach cam locks and dowels to the designated panels as per the assembly diagram.
- Connect the side panels to the bottom panel, ensuring proper alignment.
- Insert the back panel into the grooves.
- Attach the top panel, securing all connections.
- Install the interior shelves into their respective positions.
- Assemble and attach the cabinet doors using the provided hinges and handles.
- Carefully insert the electric fireplace insert into its designated opening. Ensure it fits snugly and is secured according to its specific instructions.
- Attach the RGB LED light strip along the designated area, typically under the top panel or within the open shelves. Connect it to the power source.
4.2 Placement Considerations
Place the TV stand on a level, stable surface. Ensure there is adequate space around the unit for ventilation, especially for the electric fireplace. Avoid placing the unit in direct sunlight or near heat sources.
This diagram illustrates the overall dimensions of the TV stand, including width (63 inches / 160 cm), depth (13.8 inches / 35 cm), and height (20.7 inches / 52.7 cm). It also shows the internal dimensions of the storage compartments and the maximum TV size (up to 70 inches) and weight capacity (200 lbs) for the top surface. Individual shelf weight capacities are also indicated.
5. Operating Instructions
5.1 TV Stand Usage
- Place your television centrally on the top surface. Ensure the TV base fits within the stand's dimensions.
- Utilize the open shelves and cabinet compartments for media devices, gaming consoles, and other accessories. Observe stated weight limits for each section.
- Route cables through any provided cable management openings to maintain a tidy appearance and prevent tripping hazards.
5.2 Electric Fireplace Operation
The electric fireplace typically operates via controls on the unit itself or a remote control.
- Power On/Off: Press the power button to turn the fireplace on or off.
- Flame Effect: Adjust the brightness or style of the flame effect using the dedicated flame button. Some models offer multiple flame colors or intensities.
- Heat Function: Activate the heater by pressing the heat button. Adjust temperature settings using the temperature control buttons. The heater may have multiple settings (e.g., low, high) or a thermostat.
- Timer: If available, use the timer function to set an automatic shut-off time for the heater.
5.3 RGB LED Lights Operation
The RGB LED lights are controlled by a dedicated remote control.
- Power On/Off: Use the power button on the remote to turn the LED lights on or off.
- Color Selection: Select desired colors from the color palette on the remote.
- Brightness Adjustment: Increase or decrease the brightness of the lights.
- Mode Selection: Choose from various dynamic modes such as flash, strobe, fade, or smooth transitions.
This image displays the Pinmoco 63 Inch Fireplace TV Stand in a modern setting, showcasing its functionality with a large TV placed on top, the electric fireplace insert active with flame effects, and the integrated RGB LED lights emitting a blue glow. Various media devices are visible on the shelves, demonstrating the ample storage capacity.
6. Maintenance
6.1 Cleaning the TV Stand
- Wipe surfaces with a soft, damp cloth. Avoid harsh chemicals or abrasive cleaners, which can damage the finish.
- For stubborn marks, use a mild soap solution and immediately dry with a clean cloth.
6.2 Electric Fireplace Maintenance
- Ensure the fireplace is unplugged and cool before cleaning.
- Wipe the exterior with a soft, damp cloth.
- Periodically check the air intake/outlet vents for dust accumulation and clean with a vacuum cleaner or soft brush.
- Do not attempt to service internal components of the electric fireplace. Refer to qualified service personnel if issues arise.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Electric fireplace does not turn on. | No power, power switch off, circuit breaker tripped. | Check power cord connection. Ensure wall outlet is functional. Reset circuit breaker if tripped. |
| No heat from fireplace. | Heat function not activated, thermostat set too low, air vents blocked. | Activate heat function. Increase thermostat setting. Clear any obstructions from air vents. |
| LED lights not working. | Power connection loose, remote battery dead, LED strip damaged. | Check power connection to LED strip. Replace remote battery. Contact customer support if strip is damaged. |
| TV stand feels unstable. | Loose connections, uneven floor. | Retighten all screws and cam locks. Move to a level surface or use shims to stabilize. |
8. Specifications
- Model Number: L104660FP-GRYW
- Material: Metal (frame/fireplace), Wood (panels)
- Product Dimensions: 63 x 14 x 21 inches (160 x 35 x 53.3 cm)
- Item Weight: Approximately 73 pounds (33.1 kg)
- Color: Grey
- TV Compatibility: Up to 70 inches
- Electric Fireplace: 23 inch insert, with heat and flame effects
- Lighting: RGB LED Lights
- Assembly Required: Yes
9. Warranty and Customer Support
For warranty information or if you encounter any issues not covered in this manual, please contact Pinmoco customer support. Keep your purchase receipt for warranty claims.
Contact Information: Refer to your purchase documentation or the Pinmoco official website for the most current customer support details.
