1. Introduction
Thank you for choosing the TODIMART T3S Electric Scooter. This manual provides essential information for the safe and efficient use of your scooter. Please read it thoroughly before your first ride and keep it for future reference. Proper assembly, operation, and maintenance are crucial for your safety and the longevity of the product.
2. What's in the Box
Upon unpacking, please ensure all items are present and in good condition:
- TODIMART T3S Electric Scooter
- Power Charger
- Assembly Tools
- User Manual (this document)
If any components are missing or damaged, please contact customer support immediately.
3. Assembly and Setup
The TODIMART T3S Electric Scooter is designed for quick and easy setup. Follow these steps to prepare your scooter for its first ride:
- Unfolding the Scooter: Carefully lift the stem until it locks into place. Ensure the folding mechanism is securely latched.
- Attaching the Handlebars: Insert the handlebars into the stem and tighten any screws using the provided tools. Ensure they are firm and do not wobble.
- Initial Inspection: Before riding, check that all screws are tight, tires are in good condition, and brakes are functioning correctly.
The TODIMART T3S scooter is ultra-light and portable, folding in 3 seconds for easy transport and storage. Dimensions when folded are 108x43x49 cm, with a net weight of 11.8 kg.
The scooter features a convenient 3-step folding mechanism for quick storage and portability.
4. Charging the Battery
For optimal performance and battery life, fully charge the scooter before its first use and after each ride.
- Locate the charging port on the scooter.
- Connect the charger to the scooter's charging port, then plug the charger into a standard power outlet.
- The indicator light on the charger will typically turn red during charging and green when fully charged.
- Charging time is approximately 3 hours for a full charge.
- Do not overcharge the battery. Disconnect the charger once charging is complete.
The scooter is equipped with a 36V 7.8Ah lithium-ion battery, providing a range of 30-35 km on a single charge.
5. Operating Instructions
5.1 Powering On/Off
Press and hold the power button on the display to turn the scooter on or off.
5.2 Speed Modes
The scooter features three speed modes, allowing you to adjust your ride according to conditions and preference. Refer to the display for current speed mode indication. The maximum speed is 25 km/h.
5.3 Using the Display and App Connectivity
The integrated LCD color display shows vital information such as battery capacity, current speed, and mileage. Connect via Bluetooth to the TODIMART app for additional features:
- Lock/Unlock the scooter
- Customize maximum speed
- Activate cruise control
- View GPS location (if supported by app/model)
- Receive smart alerts
The handlebar features an LED display for speed and battery level, along with controls for the accelerator, bell, and turn signals. The scooter can be controlled via the TODIMART app.
The TODIMART app allows users to personalize their riding experience with features like speed monitoring, mode switching, keyless locking, and headlight control.
5.4 Lights and Turn Signals
The scooter is equipped with LED headlights, left and right turn signals, and rear lights for enhanced visibility and safety, especially during night rides. Use the handlebar controls to activate turn signals.
The scooter features an anti-glare front headlight, turn signals, and a safety taillight to illuminate your path and ensure visibility.
5.5 Braking System
The T3S features an excellent mechanical disc brake system for smooth and comfortable stopping. Always apply brakes gently and progressively.
The scooter is equipped with a dual secure braking system, including EABS front and rear disc brakes for reliable stopping power.
5.6 Riding Safely
Always wear a helmet and appropriate safety gear. Observe local traffic laws and regulations. Avoid riding in adverse weather conditions or on slippery surfaces. The scooter has a climbing capacity of up to 25°.
The TODIMART T3S is designed for various riders, supporting a maximum load of 120 kg and suitable for heights between 120-200 cm. It features an 8.5-inch puncture-proof tire and IP55 water resistance.
6. Maintenance
Regular maintenance ensures the longevity and safe operation of your scooter.
- Tire Care: The scooter is equipped with 8.5-inch solid, maintenance-free tires. These tires offer low rolling resistance and are puncture-resistant, eliminating the risk of air leaks or blowouts. Regularly inspect them for wear and tear.
- Cleaning: Wipe down the scooter with a damp cloth after use. Avoid using high-pressure water jets or harsh chemicals, which can damage electronic components.
- Storage: Store the scooter in a cool, dry place away from direct sunlight and extreme temperatures. If storing for an extended period, ensure the battery is partially charged (around 50-70%) and recharge it every 1-2 months to prevent deep discharge.
- General Check: Periodically check all bolts and fasteners to ensure they are tight. Inspect brake cables and pads for wear.
The 8.5-inch honeycomb solid tires are maintenance-free, offering durability and puncture resistance.
7. Troubleshooting
If you encounter any issues with your TODIMART T3S Electric Scooter, please refer to the following common troubleshooting tips:
- Scooter not turning on: Ensure the battery is charged. Check that the power button is pressed and held correctly.
- Reduced range or power: This could indicate a low battery charge. Ensure the battery is fully charged before use. Battery performance can also be affected by extreme temperatures or riding conditions (e.g., uphill, heavy load).
- Brakes not responding effectively: Check the brake levers and cables for any looseness or damage. Ensure the brake pads are not excessively worn. Adjust brake tension if necessary.
- Unusual noises: Stop riding immediately and inspect the scooter for any loose parts, debris caught in the wheels, or signs of damage.
- App connectivity issues: Ensure Bluetooth is enabled on your smartphone and the scooter is powered on. Try restarting both the app and the scooter.
For persistent issues not covered here, please contact TODIMART customer support.
8. Specifications
Detailed technical specifications for the TODIMART T3S Electric Scooter:
| Feature | Specification |
|---|---|
| Brand | TODIMART |
| Model Name | T3S (with Turn Signal) |
| Motor Power | 350W Brushless Motor |
| Battery | 36V 7.8Ah Lithium-ion (280.8Wh) |
| Max Range | 30-35 KM |
| Max Speed | 25 km/h |
| Charging Time | 3 hours |
| Max Load | 120 Kilograms |
| Item Weight | 14 Kilograms |
| Product Dimensions (unfolded) | 108L x 43W x 114H Centimeters |
| Wheel Size | 8.5 Inches |
| Tire Type | Solid Synthetic Rubber (Puncture-proof) |
| Frame Material | Aluminum |
| Brake Type | Rear Braking (Mechanical Disc) |
| Special Features | Digital Display, Speedometer, Lightweight, Foldable, Anti-slip Surface, Turn Signals |
| Recommended Age | Up to 75 years |
| Recommended Use | Commuting |
The TODIMART T3S features a 350W brushless motor, a 280.8Wh lithium-ion battery, offering a range of 25-30 km and a maximum speed of 25 km/h.
The 350W motor provides high performance for daily commutes, with a 15° climbing capacity, 25 km/h maximum speed, and supports up to 120 kg.
9. Warranty and Support
TODIMART is committed to providing high-quality products and excellent customer service.
- Warranty: The TODIMART T3S Electric Scooter comes with a 1-year limited warranty.
- Spare Parts Availability: Spare parts are available for 3 years from the date of purchase.
- Customer Support: All TODIMART products include free after-sales service. If you encounter any problems, please contact us as soon as possible for assistance. We are dedicated to providing a satisfactory solution.
For warranty claims or technical support, please refer to the contact information provided with your purchase or visit the official TODIMART website.
The TODIMART T3S complies with European standard EN 17128 and is CE certified, with UN38.3 certification for battery safety.