1. Product Overview
The Emdoro Cordless 3.2L/108oz Stainless Steel Cat Water Fountain is designed to provide fresh, filtered water for your pets. Its cordless design offers flexible placement, and the multi-layer filtration system ensures clean drinking water. This fountain features an ultra-quiet pump and multiple operating modes to suit your pet's hydration needs.
Image: Emdoro Cordless Stainless Steel Cat Water Fountain, showing its sleek design and water flow.
Key Features:
- Cordless Design: Eliminates chewing hazards and allows flexible placement.
- 3.2L (108oz) Capacity: Provides up to 12 days of water for one cat.
- Multi-Layer Filtration: Activated carbon filter and sponge remove impurities, hair, and debris.
- Ultra-Quiet Pump: Operates at approximately 25 decibels for a peaceful environment.
- Durable Material: Constructed from premium 304 stainless steel, rust-resistant and BPA-free.
- Long Battery Life: Up to 45 days on a single charge.
2. Package Contents
Before assembly, please ensure all components are present:
- Pump x 1
- Water Tank x 1
- Water Tray x 1
- Control Unit x 1
- Charging Cable x 1
- Filter x 1 (pre-installed or separate)
- Sponge x 1 (pre-installed or separate)
- User Manual x 1
Image: Diagram illustrating all components included in the Emdoro Cat Water Fountain package.
3. Setup and Installation
Follow these steps to set up your Emdoro Cat Water Fountain:
- Prepare the Filter: Soak the filter in clean water for approximately 5 minutes before first use. This activates the carbon and removes any loose particles. Place the soaked filter into the filter housing.
- Assemble Pump and Control Unit: Install the water pump into the designated slot on the water tray. Attach the control unit to the water tray, ensuring it is securely connected to the pump.
- Fill Water Tank: Place the assembled water tray and control unit onto the stainless steel water tank. Fill the water tank with clean water up to the maximum fill line.
- Initial Charge (Optional): While the fountain is cordless, it is recommended to fully charge the battery before first use. Connect the charging cable to the control unit and a suitable USB power adapter (not included).
Image: Step-by-step visual guide for installing the cat drinking fountain, including filter preparation, pump assembly, and water filling.
4. Operating Modes
The Emdoro Cat Water Fountain offers three operating modes to optimize water dispensing and battery life:
- Sensing Mode: Water flows for a short duration (e.g., 15 seconds) when a pet approaches within approximately 4.9 feet (1.5 meters). This conserves battery and encourages pets to drink fresh water.
- Timed Mode: Water dispenses for 15 seconds every 15 minutes, providing regular access to fresh water throughout the day.
- Continuous Mode: Provides a steady, continuous water stream. This mode requires the fountain to be connected to an external power supply via the charging cable.
To switch between modes, press the mode selection button on the control unit. The indicator lights will show the currently active mode.
Image: Visual representation of the three operating modes: Sensing, Timed, and Continuous, with a cat observing the fountain.
5. Filtration System
The fountain utilizes a multi-layer filtration system to ensure water quality:
- Non-Woven Fabric: Traps larger particles like hair and debris.
- Activated Carbon: Removes odors, chlorine, and other impurities.
- Ion Exchange Resin: Softens water and reduces heavy metals.
- Pump Sponge: Prevents hair and debris from entering the pump, extending its lifespan.
Regular replacement of the filter is crucial for maintaining water quality. It is recommended to replace the filter every 2-4 weeks, depending on usage and the number of pets.
Image: Diagram illustrating the multi-layer filtration components and their function within the fountain.
6. Cleaning and Maintenance
Regular cleaning ensures optimal performance and hygiene for your pet.
Fountain Cleaning:
- The stainless steel components (water tank and water tray) are dishwasher safe for easy cleaning.
- The control unit and pump are not dishwasher safe and should be cleaned manually.
- Wipe down the exterior of the control unit with a damp cloth.
- Rinse the water tank and tray thoroughly with water and mild soap.
Image: The stainless steel components of the fountain placed in a dishwasher, highlighting their dishwasher-safe feature.
Pump Cleaning:
Clean the water pump every 2 weeks to prevent mineral buildup and extend its lifespan.
- Disconnect the pump from the control unit and disassemble it.
- Remove the pump cover and sponge filter.
- Take out the impeller and its cap using the provided tool or a small utensil.
- Clean the pump chamber, impeller, and cap thoroughly with the included brush and water.
- Reassemble the pump components in reverse order.
Image: Step-by-step visual guide for disassembling and cleaning the water pump components.
7. Battery Life and Charging
The Emdoro Cat Water Fountain is equipped with a rechargeable battery providing up to 45 days of operation on a single charge, depending on the selected mode and usage frequency. A full charge typically takes around 4 hours.
- The control unit features an indicator light to show the battery level.
- When the battery is low, the fountain will alert you, but it can continue to operate while plugged in.
- Use the provided USB charging cable and a standard USB power adapter (not included) to charge the fountain.
Image: A cat near the fountain with a graphic indicating 45 days of battery life on a single charge.
8. Specifications
| Feature | Detail |
|---|---|
| Model Number | SSPWF-412-A |
| Capacity | 3.2 Liters (108 oz) |
| Product Dimensions (L x W x H) | 9.65" x 4.13" x 7.2" (24.5 x 10.5 x 18.3 cm) |
| Item Weight | 0.6 kg (1.32 lbs) |
| Material | 304 Stainless Steel |
| Power Source | Battery Powered (1 Lithium Polymer battery included) |
| Noise Level | Approximately 25 dB |
| Indoor/Outdoor Usage | Indoor |
| Additional Features | Dishwasher Safe (stainless steel parts only) |
Image: Diagram showing the dimensions and weight specifications of the Emdoro Cat Water Fountain.
9. Troubleshooting
If you encounter issues with your Emdoro Cat Water Fountain, refer to the following common solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| No water flow or weak flow | Low water level, clogged filter, dirty pump, low battery. | Refill water tank. Replace or clean filter. Clean the pump thoroughly. Charge the battery. |
| Fountain is noisy | Low water level, dirty pump, improper assembly. | Ensure water level is sufficient. Clean the pump and impeller. Reassemble components correctly. |
| Water tastes or smells bad | Old water, expired filter, dirty tank. | Change water daily. Replace filter. Clean the water tank and all components. |
| Battery not holding charge | Faulty charging cable/adapter, battery degradation. | Try a different USB charging cable and adapter. Contact customer support if issue persists. |
| Motion sensor not activating | Obstruction, sensor dirty, incorrect mode. | Ensure sensor is clear and clean. Verify fountain is in Sensing Mode. |
10. Warranty and Support
The Emdoro Cat Water Fountain comes with a 1-Year Warranty as per the product specifications. For any questions, concerns, or warranty claims, please contact Emdoro customer support.
Customer Care Email: service@emdoro.com
Please have your model number (SSPWF-412-A) and purchase information ready when contacting support.