Introduction
This manual provides essential instructions for the safe assembly, use, and maintenance of your MERITLINE Twin Triple Bunk Bed, Model W504S0017. Please read all instructions carefully before assembly and retain this manual for future reference.
Safety Information
WARNING: Failure to follow these warnings and instructions could result in serious injury or death.
- Maximum Weight Capacity: The upper and middle bunks are designed to support a maximum weight of 200 lbs each. The bottom bunk also supports 200 lbs. Do not exceed these limits.
- Age Restriction: The upper and middle bunks are not suitable for children under 6 years of age.
- Guardrails: Always use the guardrails on the upper and middle bunks. Ensure they are properly installed and secured.
- Mattress Thickness: The maximum mattress thickness for the upper and middle bunks should not exceed 6 inches to ensure adequate guardrail height.
- Ladder Safety: Always use the provided ladders for access to the upper and middle bunks. Ensure the ladder is securely attached before use. Do not jump on or off the bunk bed.
- No Horseplay: Prohibit horseplay on or under the bed.
- Ventilation: Ensure proper ventilation around the bed.
- Regular Checks: Periodically check and ensure that all connectors are tight. Do not overtighten.
- Detachable Feature: When converting the bunk bed into separate beds, ensure all components are correctly reassembled and stable.
Setup and Assembly
Assembly of the MERITLINE Twin Triple Bunk Bed is required. It is recommended that two adults perform the assembly. The product typically ships in two separate boxes, which may arrive at different times.
Before You Begin:
- Unpack: Carefully unpack all components and hardware from the boxes.
- Verify Parts: Compare the contents with the parts list provided in the included assembly instruction guide. Contact customer support immediately if any parts are missing or damaged.
- Tools: All necessary tools for assembly are provided.
- Location: Assemble the bed in the room where it will be used to avoid moving it after assembly. Ensure sufficient space for assembly.
Assembly Steps:
Refer to the detailed step-by-step assembly instruction guide included in your package. Follow the diagrams and instructions precisely. Ensure all bolts and screws are tightened securely, but do not overtighten to avoid stripping threads or damaging wood.

Figure 1: Overall dimensions of the MERITLINE Twin Triple Bunk Bed.

Figure 2: Fully assembled MERITLINE Twin Triple Bunk Bed.
Operating Instructions
Using the Bunk Bed:
- Ensure mattresses are correctly sized and placed on the slat bases.
- Always use the ladders to access the upper and middle bunks.
- Do not hang items from the bed frame or guardrails.
Detachable and Convertible Feature:
This triple bunk bed can be converted into three separate twin beds. To convert:
- Carefully remove mattresses and bedding from all bunks.
- Following the reverse of the assembly instructions, carefully disassemble the connecting components between the bunk sections.
- Reassemble the individual bed frames as standalone units, ensuring all necessary hardware is used to secure each bed independently. Refer to the assembly guide for specific instructions on configuring individual beds.

Figure 3: The triple bunk bed converted into three individual twin beds.
Maintenance
- Cleaning: Wipe the bed frame with a soft, damp cloth. Avoid harsh chemicals or abrasive cleaners that may damage the wood finish.
- Hardware Check: Periodically inspect all bolts, screws, and connections to ensure they remain tight. Retighten as necessary, but do not overtighten.
- Wood Care: Protect the wood from direct sunlight and extreme temperature changes to prevent warping or cracking.
- Moving the Bed: When moving the bed, lift it rather than dragging it to prevent damage to the frame and floor.

Figure 4: Detail of the ladder and lower bunk for maintenance inspection.

Figure 5: Detail of the guardrail for safety and maintenance checks.

Figure 6: Another view of the ladder and bottom bunk connection points.
Troubleshooting
Common Issues and Solutions:
- Bed feels wobbly: Ensure all bolts and screws are securely tightened. Check that the bed is on a level surface.
- Squeaking noises: Tighten all hardware. If squeaking persists, disassemble and reassemble the affected section, ensuring all parts are correctly aligned.
- Missing parts: Refer to the parts list in your assembly guide. Contact MERITLINE customer support with the specific part number for assistance.
- Difficulty assembling: Review the assembly instructions carefully. Ensure you are using the correct hardware for each step. Do not force parts together.
Specifications
| Feature | Detail |
|---|---|
| Product Type | Triple Bunk Bed |
| Model Number | W504S0017 |
| Size | Twin |
| Color | Natural |
| Material | Rubberwood, Plywood |
| Overall Product Dimensions | 77.6"L x 43.9"W x 76.8"H |
| Overall Product Weight | 154.3 lbs |
| Bed Weight Capacity (Upper/Middle/Bottom) | 200 lbs / 200 lbs / 200 lbs |
| Suggested Mattress Thickness | 6 inches or less |
| Number of Slats (Upper/Middle/Bottom) | 13 pcs / 13 pcs / 0 |
| Assembly Required | Yes |
| Country of Origin | Malaysia |
Warranty and Support
Warranty:
This MERITLINE product comes with a 12-month warranty from the date of purchase. This warranty covers manufacturing defects. Please retain your proof of purchase for warranty claims.
Customer Support:
If you encounter any issues, have questions regarding assembly, or require replacement parts, please do not hesitate to contact MERITLINE customer support. We are committed to assisting you promptly.
Contact Information:
- For support, please visit the MERITLINE Store on Amazon or refer to the contact details provided in your purchase documentation.