Introduction
Thank you for choosing the Hemobllo Telescopic Toilet Paper Roll Holder Spring Rod. This product is designed for easy replacement and reliable performance in your bathroom. Made from durable stainless steel, it features a spring-loaded mechanism that adapts to various toilet paper roll sizes, ensuring a secure fit. Its minimalist design also allows for effortless cleaning.
Image: A set of three Hemobllo telescopic toilet paper holder spring rods, showcasing their metallic silver finish and simple design.
Setup
The Hemobllo telescopic spring rod is designed for quick and tool-free installation. Follow these steps to replace your toilet paper holder rod:
- Remove the old rod: If replacing an existing rod, gently pull it out from the toilet paper holder brackets.
- Compress the new rod: Hold the Hemobllo spring rod and compress one end by pushing it inwards.
- Insert into holder: Place the compressed end into one of the toilet paper holder brackets.
- Release and secure: Align the other end with the opposite bracket, then release the compressed end. The spring mechanism will expand, securing the rod firmly in place.
Image: A hand demonstrates holding the Hemobllo spring rod, illustrating its compact size and how it can be easily handled for installation.
Image: A detailed view of the Hemobllo spring rod's end, highlighting its adjustable core functionality and ease of installation.
Operating Instructions
Using your Hemobllo telescopic toilet paper roll holder is straightforward:
- Loading a new roll: To load a new toilet paper roll, gently compress one end of the spring rod and slide the empty cardboard core off.
- Place new roll: Slide the new toilet paper roll onto the rod.
- Re-insert: Compress the rod again and place it back into the toilet paper holder brackets, ensuring both ends are securely seated. The spring mechanism will hold the roll firmly, preventing it from slipping or falling during use.
Image: A toilet paper roll is shown on a holder, illustrating the product's function. An inset displays the Hemobllo spring rods, emphasizing their durability.
Maintenance
To ensure the longevity and appearance of your Hemobllo toilet paper roll holder spring rod, follow these simple maintenance guidelines:
- Cleaning: Wipe the rod regularly with a soft, damp cloth.
- Avoid harsh chemicals: Do not use abrasive cleaners, scouring pads, or harsh chemical solutions, as these can damage the stainless steel finish.
- Drying: After cleaning, dry the rod thoroughly with a clean, soft cloth to prevent water spots.
Troubleshooting
If you encounter any issues with your Hemobllo telescopic toilet paper roll holder, refer to the following common solutions:
- Rod does not fit: Ensure the rod is fully compressed when inserting it into the holder brackets. The spring mechanism is designed to adapt to standard holder widths. If your holder is unusually wide, the rod may not be suitable.
- Toilet paper roll slips: Verify that the rod is properly seated in both brackets and that the spring mechanism has fully expanded to hold the roll securely.
- Difficulty compressing the rod: Apply firm, even pressure to compress the rod. If it feels stiff, ensure there is no debris obstructing the mechanism.
Specifications
| Feature | Detail |
|---|---|
| Brand | Hemobllo |
| Model Number | 05SD53QA401JUX96 |
| Color | Silver |
| Material | Stainless Steel |
| Product Dimensions (L x W x H) | 13.5 x 2.4 x 2.4 cm (5.31 x 0.94 x 0.94 inches) |
| Item Weight | 133 grams |
Image: A single Hemobllo spring rod is shown with its precise dimensions, indicating a length of 13.5 cm (5.31 inches) and a width of 2.4 cm (0.94 inches).
Warranty and Support
For warranty information or product support, please refer to the retailer where you purchased this item or contact Hemobllo customer service directly. Keep your purchase receipt as proof of purchase.