1. Introduction
Thank you for choosing the FABATO AS001 TV Stand. This manual provides essential information for the safe assembly, operation, and maintenance of your new TV stand. Please read these instructions carefully before assembly and retain them for future reference.
The FABATO AS001 TV Stand is designed to accommodate televisions from 32 to 75 inches, offering an adjustable mount for optimal viewing angles. It features seven spacious fabric drawers and an open wood top shelf, providing ample storage to help keep your entertainment area organized and clutter-free.
Image 1.1: The FABATO AS001 TV Stand with a television mounted, showcasing its design and storage capabilities in a modern living room environment.
2. Safety Information
Please observe the following safety precautions to prevent injury or damage to the product:
- Read all instructions before assembly and use.
- Do not exceed the maximum weight capacity of 49 kg (110 lbs) for the TV mount.
- Ensure all screws and fasteners are securely tightened before use. Periodically check and re-tighten as necessary.
- Assemble the unit on a soft, non-abrasive surface to prevent scratches.
- Keep small parts away from children during assembly.
- If mounting the TV to a wall, ensure the wall structure can support the weight of the TV and mount. Consult a professional if unsure.
- Do not allow children to climb on or play with the TV stand.
- Place the TV stand on a level surface to prevent tipping. Use the adjustable feet to stabilize on uneven floors.
3. Package Contents
Before beginning assembly, verify that all components listed below are present and undamaged. If any parts are missing or damaged, contact customer support immediately.
3.1. Components List
- Top Wood Shelf (1)
- Side Panels (2)
- Bottom Base (1)
- Fabric Drawers (7)
- Adjustable TV Mount Assembly (1 set)
- Adjustable Feet (6)
- Hardware Pack (Screws, Allen wrench, etc.)
3.2. Tools Required (Not Included)
- Phillips Head Screwdriver
- Hammer (optional, for dowels)
4. Setup & Assembly
Follow these steps carefully for proper assembly. It is recommended to have two people for assembly.
4.1. Unpacking and Preparation
- Open the package and carefully remove all components.
- Place all parts on a clean, soft, and flat surface (e.g., a carpet or blanket) to prevent scratches.
- Identify all parts using the provided components list.
4.2. Assembling the Main Frame
- Attach the side panels to the bottom base using the designated screws. Ensure they are aligned correctly.
- Secure the top wood shelf to the assembled frame.
- Install the adjustable feet into the pre-drilled holes on the bottom base. Adjust them later to level the stand.
Image 4.1: Dimensional diagram of the TV stand, illustrating overall measurements and internal compartment sizes for planning your setup.
4.3. Installing the TV Mount
- Assemble the adjustable TV mount according to the separate mount instructions provided in the hardware pack.
- Attach the assembled TV mount to the back of the TV stand's top shelf using the specified screws.
- Ensure the mount is securely fastened and stable.
Image 4.2: Details of the adjustable TV mount, showing how to modify its height and width, along with the adjustable feet for leveling the stand.
4.4. Inserting the Drawers
- Unfold each fabric drawer.
- Insert the bottom panel into each drawer to give it rigidity.
- Slide the assembled drawers into their respective compartments in the TV stand.
Image 4.3: The TV stand's storage compartments, including seven fabric drawers and open shelves, organized with various items.
5. Operation
5.1. Mounting Your Television
- Attach the TV brackets (part of the mount assembly) to the back of your television using the appropriate screws provided in the hardware pack. Ensure the screws are compatible with your TV's VESA mounting holes.
- Carefully lift your television and hook the TV brackets onto the TV mount assembly attached to the stand.
- Secure the TV to the mount using the locking mechanisms or safety screws as per the mount instructions.
- Adjust the height and tilt of the TV as desired. The mount supports TVs from 32 to 75 inches and up to 49 kg (110 lbs).
Image 5.1: TV size compatibility and load capacity for the integrated mount.
5.2. Utilizing Storage
The TV stand features seven fabric drawers and an open top shelf for organizing media devices, accessories, books, and other items. Distribute weight evenly across the shelves and drawers.
5.3. Wall Mounting Option (for TV)
The TV mount can also be detached from the stand and installed directly onto a wall if preferred. Ensure proper wall anchors are used for your wall type (e.g., wood studs, concrete, drywall). Screws for wall mounting are included in the hardware pack.
Image 5.2: Illustration of the TV mount's optional wall installation, allowing the television to be mounted directly to the wall above the stand.
6. Maintenance
6.1. Cleaning
To clean the TV stand, wipe surfaces with a dry, soft cloth. Avoid using abrasive cleaners, harsh chemicals, or excessive moisture, as these can damage the wood and fabric finishes.
6.2. Fastener Checks
Periodically check all screws and fasteners to ensure they remain tight. Re-tighten any loose connections to maintain the stability and safety of the unit.
6.3. Drawer Care
The fabric drawers can be spot cleaned with a damp cloth and mild detergent if necessary. Allow them to air dry completely before returning them to the stand.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Stand is wobbly or unstable. | Uneven floor; loose fasteners. | Adjust the leveling feet on the bottom of the stand. Check and tighten all assembly screws. |
| TV mount does not fit TV. | Incorrect VESA pattern; TV size outside range. | Verify your TV's VESA pattern matches the mount. Ensure your TV is between 32-75 inches and within the 49 kg (110 lbs) weight limit. |
| Drawers do not slide smoothly. | Drawer not fully assembled; obstruction. | Ensure the bottom panel is fully inserted into the fabric drawer. Check for any items obstructing the drawer's path. |
| Missing parts. | Packaging error. | Contact FABATO customer support with your model number and purchase details. |
8. Specifications
- Model: AS001
- Brand: FABATO
- Material: MDF, Melamine Cover, Fabric (drawers)
- Color: White
- Overall Dimensions (L x W x H): 160 cm x 28.9 cm x 68.3 cm (63 in x 11.4 in x 26.9 in)
- Item Weight: 22.3 kg (49.16 lbs)
- Number of Drawers: 7
- Number of Shelves: 1 (open top)
- TV Size Compatibility: 32 - 75 inches
- TV Mount Load Capacity: 49 kg (110 lbs)
- Special Features: Adjustable Legs, Ample Storage Space, Adjustable TV Mount (can be wall-mounted)
- Assembly Required: Yes
- Care Instructions: Wipe with Dry Cloth
- UPC: 783902571228
9. Warranty & Support
9.1. Warranty Information
FABATO products are manufactured with quality and care. For specific warranty details regarding your AS001 TV Stand, please refer to the warranty card included in your package or visit the official FABATO website. Keep your proof of purchase for warranty claims.
9.2. Customer Support
If you have any questions, require assistance with assembly, or need to report missing/damaged parts, please contact FABATO customer support. Have your model number (AS001) and purchase date ready when contacting support.
Contact Information:
- Website: www.fabato.com (Placeholder, replace with actual if available)
- Email: support@fabato.com (Placeholder, replace with actual if available)
