Merax Mid Century Modern 3 Seater Sofa User Manual

Introduction

Welcome to your new Merax Mid Century Modern 3 Seater Sofa. This manual provides essential information for assembly, use, and maintenance to ensure long-lasting enjoyment of your furniture. Please read these instructions carefully before assembly and use.

Image: The Merax Mid Century Modern 3 Seater Sofa in dark brown, placed in a contemporary living room with a coffee table and decorative pillows.

Safety Information

To ensure safe use and prevent damage, please observe the following safety guidelines:

• Ensure all parts are present and undamaged before beginning assembly. Do not proceed with assembly if any parts are missing or damaged.
• Assemble the sofa on a soft, clean, and level surface (e.g., a carpet or blanket) to prevent scratches or damage to the product or your floor.
• Do not overtighten screws during assembly. This can strip threads or crack components. Tighten until snug.
• Keep small parts and packaging materials away from children and pets to prevent choking hazards.
• Do not stand on the sofa or use it as a step stool. It is designed for seating purposes only.
• Periodically check and tighten all connections and fasteners to maintain stability and safety.
• Avoid placing the sofa near open flames, heaters, or in direct, prolonged sunlight, which can cause material degradation or discoloration.

Package Contents

Please verify that all the following components are included in your package:

• Sofa Frame (Main Body)
• Birch Wood Legs (4 pieces)
• Hardware Pack (includes screws, washers, and Allen wrench)
• Instruction Manual (this document)

Assembly Instructions

Follow these steps to assemble your Merax sofa:

Step 1: Unpack Components

Carefully remove all parts from the packaging. Place them on a clean, soft surface to avoid damage to the sofa or your floor.

Step 2: Attach Legs

Locate the four birch wood legs and the hardware pack. Turn the sofa frame upside down on your protected surface. Align each leg with the pre-drilled holes on the bottom corners of the sofa frame. Securely attach each leg using the provided screws and Allen wrench. Tighten until snug, but do not overtighten.

Step 3: Position the Sofa

With the assistance of another person, carefully turn the sofa upright and place it in its desired location. Ensure all legs are stable and the sofa is level. Adjust if necessary.

Image: A diagram illustrating the dimensions of the Merax Mid Century Modern 3 Seater Sofa, including overall width (80.25 inches), depth (31.25 inches), and height (26.00 inches). Seat depth is 22.75 inches and seat height is 15.75 inches. This view also shows the underside where legs attach.

Usage Guidelines

To maximize the lifespan and comfort of your sofa, please follow these usage guidelines:

Seating

The sofa is designed for comfortable seating for up to three individuals. Avoid excessive force, jumping, or standing on the sofa, as this can compromise its structural integrity and upholstery.

Placement

Place the sofa on a flat, stable surface to prevent wobbling. Avoid positioning it in direct sunlight for extended periods or too close to heat sources like radiators or fireplaces, as this can cause the faux leather to fade, crack, or dry out.

Maintenance

Proper care and maintenance will help preserve the appearance and durability of your sofa.

Cleaning Faux Leather Upholstery

• The faux leather surface is waterproof and wrinkle-resistant, making it easy to clean.
• For general cleaning, wipe the surface with a soft, slightly damp cloth.
• For spills, blot immediately with a clean, dry cloth. Do not rub, as this can spread the stain.
• Avoid using abrasive cleaners, harsh chemicals, solvents, or furniture polish, as these can damage the faux leather.
• For stubborn stains, a mild soap solution (diluted with water) can be used, followed by wiping with a clean, damp cloth and then drying thoroughly. Test on an inconspicuous area first.

Leg Care

• Periodically check the tightness of the birch wood legs. Tighten if necessary to maintain stability and prevent wobbling.
• Clean the legs with a dry or slightly damp cloth. Avoid harsh chemicals.

Troubleshooting

If you encounter any issues with your sofa, refer to the following common problems and solutions:

Sofa feels wobbly or unstable

• Solution: Ensure all legs are securely tightened. Check if the sofa is placed on an uneven surface. If so, try moving it to a level area or use furniture shims under the legs to stabilize it.

Minor scratches or marks on faux leather

• Solution: For very minor surface marks, sometimes a soft, dry cloth can buff them out. For deeper scratches, a specialized faux leather repair kit may be used. Always test any repair product on an inconspicuous area first.

Squeaking noises

• Solution: Squeaking often indicates loose connections. Re-tighten all screws and bolts on the frame and legs. If the issue persists, contact customer support.

Specifications

Detailed specifications for the Merax Mid Century Modern 3 Seater Sofa:

Image: A diagram illustrating the dimensions of the Merax Mid Century Modern 3 Seater Sofa, including overall width (80.25 inches), depth (31.25 inches), and height (26.00 inches). Seat depth is 22.75 inches and seat height is 15.75 inches.

Warranty and Support

For warranty information, product support, or to inquire about replacement parts, please contact Merax directly. Keep your purchase receipt as proof of purchase for any warranty claims.

You can find more information and contact details by visiting the official Merax Store:

Merax Official Store