Lamshaw MFVLP D16, LC210, LC310 Smart Watch Bands

Lamshaw MFVLP Smart Watch Band Instruction Manual

Model: MFVLP D16, LC210, LC310 Smart Watch Bands

1. Product Overview

This manual provides instructions for the Lamshaw Quick Release Silicone Sport Strap Replacement Watchband, designed for compatibility with MFVLP D16, LC210, and LC310 Smart Watches. This band features a magnetic closure system and is made from durable, comfortable silicone.

Lamshaw Smart Watch Band on a wrist, showing its sleek design.

Image: The Lamshaw Smart Watch Band, designed for a stylish and comfortable fit.

2. Key Features

  • Magnetic Closure with Safety Loop: Equipped with N54 magnets for a strong hold, providing 30% more stability than N52 magnets. A detachable safety loop offers additional security, ensuring the watch remains in place during various activities.
  • Comfortable and Durable Material: Constructed from premium silicone, the band is soft, skin-friendly, and designed for all-day comfort. It is scratch-resistant, wear-resistant, and easy to clean.
  • Waterproof Design: The band is waterproof, allowing for easy cleaning by rinsing or wiping, maintaining its appearance even with regular use.
  • Size Compatibility: Available in 20mm and 22mm sizes to fit various MFVLP Smart Watch models. The 20mm band is for MFVLP LC210, and the 22mm band is for MFVLP D16 and LC310. Bands fit wrists from 5.5 inches to 8.7 inches (140mm-220mm).
Close-up of the magnetic closure system of the Lamshaw watch band, showing the strong N54 magnets.

Image: Detail of the magnetic closure system, highlighting the strong N54 magnets for secure fastening.

Image showing the soft, flexible silicone material of the Lamshaw watch band.

Image: The soft and flexible silicone material of the watch band, emphasizing comfort.

3. Setup and Installation

To install the Lamshaw Smart Watch Band, follow these steps:

  1. Identify the correct band size (20mm or 22mm) for your MFVLP Smart Watch model. Check the back of your watch for the size specification.
  2. Locate the quick-release pins on the watch band.
  3. Insert one end of the quick-release pin into the lug hole of your smart watch.
  4. Slide the quick-release lever to retract the pin, then align the other end with the opposite lug hole.
  5. Release the lever to secure the pin in place. Gently tug on the band to ensure it is properly attached.
  6. Repeat the process for the other half of the watch band.
Diagram showing how to attach a quick-release watch band to a smart watch.

Image: Illustration of the quick-release pin mechanism for attaching the watch band.

For a visual guide on installation and wearing, please refer to the video below:

Video: Demonstrates the installation process and how to wear the Lamshaw Magnetic Silicone Sport Watch Band.

4. Operating Instructions

To wear and adjust your Lamshaw Smart Watch Band:

  1. Place the watch on your wrist.
  2. Wrap the band around your wrist, allowing the magnetic ends to connect.
  3. Adjust the band to your desired tightness. The N54 magnets will securely hold the band in place.
  4. For added security during strenuous activities, ensure the detachable safety loop is properly engaged.
A person wearing the Lamshaw magnetic watch band, showing how it wraps around the wrist and secures.

Image: The watch band being worn, demonstrating the magnetic closure and comfortable fit.

5. Maintenance and Care

To ensure the longevity and cleanliness of your watch band:

  • Cleaning: Due to its waterproof silicone material, the band can be easily cleaned. Simply rinse it under water or wipe it with a damp cloth. Avoid harsh chemicals or abrasive cleaners.
  • Drying: After cleaning or exposure to water, allow the band to air dry completely before wearing it again.
  • Storage: Store the band in a clean, dry place away from direct sunlight and extreme temperatures when not in use.

6. Troubleshooting

  • Band feels loose: Ensure the magnetic closure is fully engaged and the safety loop (if applicable) is secured. Adjust the band to a snug fit on your wrist.
  • Difficulty attaching band: Verify that you have the correct band size for your watch model. Ensure the quick-release pins are properly aligned with the lug holes and fully retracted before releasing.
  • Skin irritation: If you experience skin irritation, ensure the band is clean and dry. Avoid wearing the band too tightly. If irritation persists, discontinue use and consult a healthcare professional.

7. Specifications

BrandLamshaw
MaterialSilicone
Clasp TypeMagnetic with Safety Loop
CompatibilityMFVLP D16, LC210, LC310 Smart Watches
Band Sizes20mm (for LC210), 22mm (for D16, LC310)
Wrist Fit5.5 inches to 8.7 inches (140mm-220mm)

8. Warranty and Support

For warranty information or product support, please contact Lamshaw customer service through the retailer where the product was purchased or visit the official Lamshaw website. Keep your purchase receipt as proof of purchase.

© 2025 Lamshaw. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.