Product Overview
This manual provides detailed instructions for the installation, operation, and maintenance of your Aquonderful Smart Bidet Toilet Seat Model 225D (Round). Please read this manual thoroughly before installation and use to ensure proper function and safety.

Image: Aquonderful Smart Bidet Toilet Seat Model 225D (Round) with remote control.
Safety Information
Adhere to the following safety guidelines to prevent injury or damage to the product:
- Ensure the product is installed by a qualified individual if you are unsure about plumbing or electrical connections.
- Do not immerse the unit in water or spray water directly onto the electrical components.
- Ensure the electrical outlet is properly grounded and rated for the bidet's power requirements.
- Keep the remote control dry and away from excessive moisture.
- Unplug the unit from the power outlet before performing any cleaning or maintenance.
- Do not attempt to repair or modify the unit yourself. Contact customer support for assistance.
Package Contents
Verify that all components are present in the package:
- Smart Bidet Toilet Seat (Model 225D)
- Wireless Remote Control
- Installation Guide / Instruction Manual
- Mounting Hardware (brackets, screws, nuts)
- Water Supply Hoses and T-Valve
- Pipe Thread Seal Tape
Product Features
The Aquonderful Smart Bidet Toilet Seat Model 225D offers a range of features for enhanced hygiene and comfort:
Adjustable Washes
- Rear Wash: Standard cleansing for posterior.
- Front Wash: Gentle cleansing for feminine hygiene.
- Vortex Wash: A stronger, more focused wash option.
- Oscillating Wash: Nozzle moves back and forth for a wider cleaning area.
- Self-Cleaning Nozzle: Automatic cleaning of the nozzle before and after each use.

Image: Visual representation of the bidet's adjustable wash functions, including rear, front, oscillating, and self-cleaning modes.
Unlimited Warm Water
Enjoy continuous warm water for a comfortable wash. Water pressure, nozzle position, and water temperature (cold, warm, or hot) are adjustable via the remote control.
Heated Seat & Warm Air Dryer
The toilet seat provides adjustable warmth for comfort. After washing, a warm air dryer with adjustable settings (High, Middle, Low) helps reduce the need for toilet paper.

Image: Close-up of the bidet's warm air dryer vent, illustrating the adjustable settings for air temperature.
Night Light
An integrated LED night light illuminates the toilet bowl, providing convenience during nighttime use without needing to turn on bright bathroom lights.

Image: The bidet toilet seat with its night light activated, casting a soft glow into the toilet bowl.
Slow Closing Seat & Lid
The seat and lid are designed with a slow-closing mechanism to prevent slamming and reduce noise.
Stainless Steel Spray Rod
The spray nozzle is constructed from durable stainless steel for hygiene and longevity.
Wireless Remote Control & LCD Display
All functions are easily controlled via a wireless remote. The unit also features an LCD display for clear indication of settings.

Image: The wireless remote control for the bidet, displaying buttons for functions like wash, dry, temperature, and nozzle adjustments.
Installation Guide
Pre-Installation Check
Before beginning installation, ensure your toilet is compatible and you have the necessary electrical access:
- Toilet Shape: This model is designed for Round toilets. Verify your toilet's shape and dimensions.
- Electrical Outlet: A grounded 3-prong electrical outlet is required near the toilet for power.

Image: A guide illustrating how to measure a toilet for proper bidet seat fit, distinguishing between round and elongated shapes, and indicating the need for an electrical outlet.
Step-by-Step Installation
Follow these steps for a successful installation:
- Remove Existing Toilet Seat: Detach your current toilet seat and lid from the toilet bowl.
- Install Mounting Plate: Place the bidet's mounting plate over the toilet bolt holes and secure it.
- Attach T-Valve: Turn off the water supply to the toilet. Disconnect the existing water supply hose from the toilet tank. Install the provided T-valve between the toilet tank and the water supply hose. Apply thread tape to prevent leaks.
- Connect Bidet Water Hose: Connect one end of the bidet's water supply hose to the T-valve and the other end to the bidet unit.
- Slide Bidet Seat into Place: Carefully slide the bidet toilet seat onto the mounting plate until it clicks securely.
- Connect Power: Plug the bidet's power cord into the grounded electrical outlet.
- Restore Water Supply: Slowly turn on the water supply to the toilet and check for any leaks.

Image: A visual guide detailing the four main steps for installing the bidet toilet seat, from removing the old seat to connecting the water hoses.
Video: This video demonstrates the installation process of the Aquonderful Smart Bidet Toilet Seat Model 225D, including securing the mounting plate, connecting water lines, and powering the unit. It also highlights key features like the LCD display and remote control.
Operation
The Aquonderful Smart Bidet Toilet Seat is operated primarily via its wireless remote control. Ensure the remote has working batteries and is within range of the bidet unit.
Remote Control Functions
The remote control allows you to customize your bidet experience:
- Stop/Power: Turns the unit on/off or stops current operation.
- Rear Wash: Activates the posterior wash.
- Bidet Wash: Activates the feminine wash.
- Drying: Activates the warm air dryer.
- Adjustable Nozzle Position: Moves the nozzle forward or backward.
- Adjustable Water Pressure: Increases or decreases water spray intensity.
- Adjustable Water Temp: Sets the water temperature (cold, warm, hot).
- Adjustable Heated Seat: Controls the seat temperature.
- Adjustable Warm Air: Adjusts the temperature of the drying air.
- Kids Mode: Provides a gentle, pre-set wash and dry cycle suitable for children.
- Auto Mode: Initiates a standard wash and dry cycle.
- Night Light: Toggles the LED night light on/off.
- Turbo Wash: Provides a stronger, more concentrated wash.
- ECO Mode: Reduces energy consumption by lowering seat and water temperatures when not in use.
Skin Sensor
For safety and proper operation, the bidet's wash and dry functions will only activate when a user is seated on the toilet seat, detected by an integrated skin sensor.
Maintenance
Regular cleaning and maintenance will ensure the longevity and hygienic operation of your bidet toilet seat:
- Exterior Cleaning: Wipe the exterior surfaces with a soft, damp cloth and a mild, non-abrasive cleaner. Do not use harsh chemicals or abrasive pads.
- Nozzle Cleaning: The nozzle performs a self-cleaning cycle automatically. For additional cleaning, gently pull out the nozzle and wipe it with a soft cloth. Do not use excessive force.
- Filter Cleaning: Periodically check and clean the water inlet filter to prevent blockages and maintain water flow. Refer to the full manual for specific instructions on accessing the filter.
- Winterization (if applicable): If the unit will be exposed to freezing temperatures, ensure all water is drained from the bidet to prevent damage. Consult the full manual for detailed winterization procedures.
- Power Disconnection: Always unplug the unit from the electrical outlet before performing any deep cleaning or maintenance.
Troubleshooting
If you encounter issues with your bidet toilet seat, try the following basic troubleshooting steps:
- No Power: Check if the power cord is securely plugged into a working electrical outlet. Verify the circuit breaker has not tripped.
- No Water Spray: Ensure the water supply valve to the toilet is fully open. Check if the water inlet filter is clogged.
- No Warm Water: Verify the water temperature setting on the remote control. Allow a few moments for the water heater to warm up.
- Functions Not Activating: Ensure you are properly seated on the bidet seat, as the skin sensor must be engaged for wash and dry functions. Check remote control batteries.
- Leaks: Tighten all water connections. Ensure thread tape was applied correctly during installation.
For more detailed troubleshooting or persistent issues, please refer to the comprehensive troubleshooting section in the full instruction manual or contact Aquonderful customer support.
Specifications
| Feature | Detail |
|---|---|
| Brand | Aquonderful |
| Model Number | 225D |
| Item Shape | Round |
| Color | White |
| Material | Acrylonitrile Butadiene Styrene (ABS) |
| Product Dimensions | 20"L x 15.91"W |
| Item Weight | 10 Pounds |
| Power Source | Corded Electric (Requires 3-prong outlet) |
| Included Components | Bidet seat, remote control, installation hardware |
Warranty and Support
For detailed information regarding the product warranty, including coverage, duration, and terms, please refer to the warranty card or documentation included in your product packaging. For technical support, troubleshooting assistance, or to inquire about replacement parts, please contact Aquonderful customer service through the contact information provided in your product documentation or on the official Aquonderful website.