Introduction
This manual provides detailed instructions for the setup, operation, and maintenance of your KESHIDE Model 109 Travel Digital Alarm Clock. Please read this manual thoroughly before using the product to ensure proper function and longevity.
Figure 1: Front view of the KESHIDE Model 109 Travel Digital Alarm Clock.
Package Contents
- 1 x KESHIDE Model 109 Travel Digital Alarm Clock
- 1 x User Manual (this document)
Product Overview
Familiarize yourself with the clock's display and control buttons.
Display Elements
Figure 2: Labeled front and back views of the alarm clock.
- Time Display: Shows current hour and minutes.
- 12H/24H Indicator: Displays AM/PM for 12-hour format.
- Alarm Time: Indicates the set alarm time.
- Date Display: Shows month and day.
- Temperature Display: Shows indoor temperature in Celsius or Fahrenheit.
Control Buttons (Rear Panel)
Figure 3: Rear panel control buttons.
- MODE Button: Used to switch between time display, alarm setting, and date setting modes.
- SET Button: Used to enter setting mode for time, alarm, or date.
- ADJ Button: Used to adjust values (increase/decrease) during setting mode.
- TIMER Button: (Functionality not detailed in product description, typically for countdown timer).
- 12/24 Switch: Slide switch to toggle between 12-hour and 24-hour time formats.
- °C/°F Switch: Slide switch to toggle between Celsius and Fahrenheit temperature units.
- SNOOZE Button (Top): Activates the snooze function when the alarm sounds.
Setup
1. Battery Installation
- Locate the battery compartment on the back of the clock.
- Open the battery compartment cover.
- Insert two (2) AAA batteries (not included), ensuring correct polarity (+/-).
- Close the battery compartment cover securely.
2. Initial Time and Date Setting
Upon battery installation, the display will activate. You will need to set the current time and date.
- Press the MODE button repeatedly until the time display is shown (usually the default).
- Press and hold the SET button for a few seconds until the hour digits begin to flash.
- Use the ADJ button to adjust the hour. Press SET to confirm and move to the minutes.
- Use the ADJ button to adjust the minutes. Press SET to confirm and move to the year.
- Continue this process, using ADJ to change values and SET to confirm and advance through year, month, and day settings.
- Once all settings are confirmed, the clock will return to normal time display.
Operating Instructions
Setting the Alarm
- From the time display, press the MODE button once to enter alarm setting mode. The alarm time will be displayed.
- Press and hold the SET button until the alarm hour digits flash.
- Use the ADJ button to set the desired alarm hour. Press SET to confirm.
- Use the ADJ button to set the desired alarm minutes. Press SET to confirm.
- Press MODE to exit alarm setting mode. The alarm icon will appear on the display, indicating the alarm is active.
Activating/Deactivating the Alarm
While in alarm display mode (press MODE once), press the ADJ button to toggle the alarm ON or OFF. An alarm icon will indicate if the alarm is active.
Snooze Function
Figure 4: Activating the snooze function.
- When the alarm sounds, press the large SNOOZE button located on the top of the clock.
- The alarm will temporarily stop and sound again after approximately five minutes.
- To turn off the alarm completely, press any button on the back panel or allow it to ring for one minute without intervention. The alarm sound gradually increases in intensity over 60 seconds.
12-Hour / 24-Hour Format Switch
Figure 5: Switching between 12-hour and 24-hour time display.
Locate the 12/24 slide switch on the back of the clock. Slide it to your preferred time format. "AM" or "PM" will be displayed for the 12-hour format.
Temperature Unit Switch (°C/°F)
Figure 6: Temperature display and unit selection.
Locate the °C/°F slide switch on the back of the clock. Slide it to select either Celsius or Fahrenheit for the temperature display.
Maintenance
- Cleaning: Wipe the clock with a soft, dry cloth. Do not use abrasive cleaners or solvents.
- Battery Replacement: Replace batteries when the display dims or functions become erratic. Always use new AAA batteries.
- Storage: If storing the clock for an extended period, remove the batteries to prevent leakage.
- Environment: Avoid exposing the clock to extreme temperatures, direct sunlight, or high humidity.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Display is blank or dim. | Batteries are dead or incorrectly installed. | Replace with new AAA batteries, ensuring correct polarity. |
| Cannot set time or alarm. | Not in setting mode, or buttons are not pressed correctly. | Ensure you press and hold the SET button to enter setting mode. Follow the steps in the "Setup" and "Operating Instructions" sections carefully. |
| Alarm does not sound. | Alarm is not activated or set incorrectly. | Verify the alarm time is set and the alarm icon is visible on the display. Check battery level. |
| Incorrect temperature reading. | Incorrect temperature unit selected. | Slide the °C/°F switch on the back to select the desired unit. |
Specifications
| Feature | Detail |
|---|---|
| Model Number | 109 |
| Brand | KESHIDE |
| Dimensions | 4" W x 1" H (approx. 10.16 cm W x 2.54 cm H) |
| Weight | 2.89 ounces (approx. 81.9 grams) |
| Power Source | 2 x AAA Batteries (not included) |
| Display Type | LCD |
| Temperature Range | 0°C ~ 50°C (32°F ~ 122°F) |
| Temperature Accuracy | ±1.5°F |
| Time Format | 12-hour / 24-hour switchable |
| Snooze Duration | Approximately 5 minutes |
Warranty and Support
Limited Warranty
KESHIDE products are manufactured to high-quality standards. This product is covered by a limited warranty against defects in materials and workmanship under normal use. Please retain your proof of purchase for warranty claims.
Customer Support
For any questions, concerns, or support needs regarding your KESHIDE Model 109 Travel Digital Alarm Clock, please contact KESHIDE customer service through the platform where you purchased the product. Our team is available to assist you even after the standard return window.
For direct inquiries, please refer to the contact information provided with your purchase or visit the official KESHIDE brand page.
