1. Introduction
This manual provides essential information for the safe and efficient operation, installation, and maintenance of your Mirage V32 Inverter Mini-Split Air Conditioner, Model SETCVF261E. This unit is designed to provide cooling for your space with advanced inverter technology, optimizing performance and reducing energy consumption. With a cooling capacity of 24,000 BTU, it is suitable for larger areas, offering rapid and efficient cooling.
Key Features:
- Ozone Care: Utilizes R32 refrigerant, contributing to zero ozone layer depletion.
- Pro-Planet: Designed for a 70% lower impact on global warming.
- X-Cool: Superior cooling design for efficient temperature reduction with minimal effort.
- Inverter Technology: Optimizes performance and reduces energy consumption.
- High Efficiency: Features a Seasonal Energy Efficiency Ratio (SEER) of 17.7.
2. Safety Information
Please read all safety instructions carefully before operating the unit. Failure to follow these instructions may result in property damage, personal injury, or death. Keep this manual for future reference.
- Ensure the unit is installed by a qualified professional in accordance with local electrical and building codes.
- Do not attempt to repair or service the unit yourself. Contact qualified service personnel.
- Always disconnect power before cleaning or performing maintenance.
- Do not block the air intake or outlet vents of the indoor or outdoor unit.
- Keep children and pets away from the unit during operation.
- Use only the specified refrigerant (R32).
3. Product Overview
The Mirage V32 Inverter Mini-Split Air Conditioner consists of an indoor unit and an outdoor unit. Below are images illustrating the indoor unit and its dimensions.
Figure 3.1: Front view of the Mirage V32 Inverter Mini-Split indoor unit, showing the digital display and Mirage V32 Inverter branding.
Figure 3.2: Angled view of the Mirage V32 Inverter Mini-Split indoor unit, highlighting its sleek design and digital temperature display.
Figure 3.3: Dimensional diagram of the Mirage V32 Inverter Mini-Split indoor unit, showing measurements of 102.5 cm (width), 31.9 cm (height), and 22.3 cm (depth).
4. Installation and Setup
Installation of a mini-split air conditioner requires specialized knowledge and tools. It is highly recommended that you engage a certified HVAC professional for the installation process to ensure proper functioning, safety, and compliance with warranty terms.
Key Installation Considerations:
- Power Supply: The unit requires a 220V-230V electrical supply. Ensure the electrical circuit can support the unit's power requirements.
- Location: Choose a location for both indoor and outdoor units that allows for optimal airflow, easy maintenance, and minimal noise disturbance.
- Drainage: Proper drainage for condensate water must be established for the indoor unit.
- Refrigerant Lines: The refrigerant lines connecting the indoor and outdoor units must be properly sized, insulated, and sealed.
5. Operating Instructions
Your Mirage V32 Mini-Split Air Conditioner is designed for cooling only ("Solo Frio"). The unit is typically controlled via a remote control (not pictured, but standard for mini-splits).
Basic Operation:
- Power On/Off: Press the POWER button on the remote control to turn the unit on or off.
- Mode Selection: Select the COOL mode. This unit does not support heating.
- Temperature Adjustment: Use the TEMP UP and TEMP DOWN buttons to set your desired room temperature.
- Fan Speed: Adjust the fan speed (Auto, Low, Medium, High) using the FAN button to control airflow and noise levels.
- Swing Function: Activate the SWING function to automatically move the air deflector for even air distribution.
The inverter technology allows the compressor to adjust its speed to maintain the set temperature precisely, leading to consistent comfort and energy savings.
6. Maintenance
Regular maintenance ensures optimal performance, energy efficiency, and longevity of your air conditioner. Always disconnect power to the unit before performing any maintenance.
Recommended Maintenance:
- Air Filter Cleaning (Monthly): Open the front panel of the indoor unit and remove the air filters. Clean them with a vacuum cleaner or wash them with lukewarm water and mild detergent. Allow them to dry completely before reinstalling.
- Outdoor Unit Cleaning (Annually): Ensure the outdoor unit's coils are free from dirt, leaves, and other debris. This may require professional cleaning.
- Drainage Check: Periodically check the condensate drain line for blockages to prevent water leaks.
- Professional Inspection (Annually): Schedule an annual inspection and tune-up by a qualified HVAC technician to check refrigerant levels, electrical connections, and overall system health.
7. Troubleshooting
Before contacting service, please refer to the following common issues and their potential solutions.
| Problem | Possible Cause | Solution |
|---|---|---|
| Unit does not turn on. | No power supply; circuit breaker tripped; remote control batteries dead. | Check power connection; reset circuit breaker; replace remote control batteries. |
| Insufficient cooling. | Dirty air filters; blocked outdoor unit; wrong mode selected; room too large. | Clean air filters; clear obstructions from outdoor unit; ensure COOL mode is selected; verify unit capacity matches room size. |
| Water leakage from indoor unit. | Blocked condensate drain line; improper installation. | Clear drain line blockage; contact a professional for inspection. |
| Unusual noise. | Loose parts; foreign objects in fan; compressor issue. | Turn off unit and inspect for loose parts or obstructions. If noise persists, contact service. |
If the problem persists after attempting these solutions, please contact qualified service personnel.
8. Technical Specifications
| Specification | Value |
|---|---|
| Manufacturer | Mirage |
| Product Model Number | SETCVF261E |
| Product Dimensions (Indoor Unit) | 31.9 x 102.5 x 23.3 cm (Height x Width x Depth) |
| Weight | 52.4 kg |
| Brand | Genérico (Generic) - Note: Manufacturer is Mirage, Brand listed as Generic. |
| Capacity | 2 Toneladas (2 Tons) |
| Cooling Capacity | 24000 British Thermal Units (BTU) |
| Special Feature | Inverter Compressor, Advanced Cooling |
| Seasonal Energy Efficiency Ratio (SEER) | 17.7 |
| Color | White |
| Voltage | 230.0 V |
| Noise Level | 46 Decibels |
9. Warranty and Support
This product comes with a manufacturer's warranty. Please refer to the warranty card included with your purchase for specific terms and conditions, including coverage duration and claim procedures.
Extended warranty options may be available through third-party providers, such as Assurant, offering coverage for 2, 3, or 4 years beyond the manufacturer's warranty.
For technical support, service requests, or warranty claims, please contact the retailer or the manufacturer directly using the contact information provided in your purchase documentation.
