PETLIBRO Dockstream 2 Cordless Cat Water Fountain User Manual

1. Introduction

Thank you for choosing the PETLIBRO Dockstream 2 Cordless Cat Water Fountain. This manual provides essential information for the safe and effective use of your new pet fountain. The Dockstream 2 is designed to provide your pet with fresh, filtered water, featuring a cordless design for flexible placement, app monitoring for hydration tracking, and a durable stainless steel tray.

Please read this manual thoroughly before initial use and retain it for future reference.

2. Safety Instructions

• Ensure the fountain is placed on a stable, level surface to prevent tipping.
• For indoor use only. Do not expose the fountain to direct sunlight or extreme temperatures.
• Keep the charging cable and adapter away from water and out of reach of pets to prevent electrical hazards.
• Do not allow pets to chew on the power cord.
• Always unplug the fountain before cleaning or performing maintenance.
• Use only genuine PETLIBRO replacement parts and filters.
• Do not operate the fountain without water.
• Keep out of reach of children.

3. Package Contents

Verify that all components are present in your package:

• PETLIBRO Dockstream 2 Fountain Unit (Base, Water Tank, Stainless Steel Tray, Spout)
• 8 x Filter Replacements (4 white filter elements, 4 black foam filters)
• Charging Cable and Power Adapter
• User Manual

Image: PETLIBRO Dockstream 2 Cordless Cat Water Fountain with included 8-pack filter replacements.

4. Product Overview

The PETLIBRO Dockstream 2 features a modular design for easy assembly and cleaning. Key components include:

• Base Unit: Contains the battery, charging port, and smart sensors.
• Water Tank: The main reservoir for water, with a 3-liter capacity.
• Stainless Steel Tray: Provides a hygienic drinking surface for your pet.
• Water Spout: Directs the water flow.
• Filter Assembly: Houses the multi-layer filtration system.

Image: Overview of PETLIBRO Dockstream 2 components, highlighting the detachable tank, pump-free design, and 3-liter capacity.

5. Setup Guide

5.1 Initial Preparation

1. Unpack all components and remove any protective films or packaging materials.
2. Rinse the water tank, stainless steel tray, and water spout thoroughly with water. The stainless steel tray is dishwasher-safe (up to 212°F/100°C), but the water spout and filter cover are not.
3. Soak the new filter element in clean water for 5 minutes before installation to remove any loose carbon dust.

5.2 Assembly

1. Place the foam filter into the designated slot in the filter assembly.
2. Insert the white filter element on top of the foam filter.
3. Fill the water tank with clean water up to the MAX fill line. Do not overfill.
4. Place the stainless steel tray onto the water tank, ensuring it is securely seated.
5. Insert the water spout into the opening on the stainless steel tray.
6. Carefully place the assembled water tank onto the base unit. Ensure proper alignment.

5.3 Charging and App Connection

1. Connect the charging cable to the base unit and plug the adapter into a power outlet. Allow the fountain to fully charge before its first cordless use. The battery indicator light on the base will show charging status.
2. Download the PETLIBRO app from your device's app store.
3. Open the app, create an account, and follow the on-screen instructions to add your Dockstream 2 fountain. Ensure your Wi-Fi network is 5 GHz compatible for optimal connectivity.
4. The app will guide you through any necessary calibration steps.

Image: The PETLIBRO Dockstream 2 fountain placed cordlessly in a living space, demonstrating its flexible placement.

6. Operating Instructions

6.1 Powering On and Water Flow Modes

• Once assembled and charged, the fountain will automatically activate.
• The Dockstream 2 offers various water flow modes, configurable via the PETLIBRO app:
  • Continuous Flow: Water runs constantly.
  • Motion-Activated: Water dispenses when your pet approaches, conserving battery life. You can set close or far distance triggers.

6.2 App Features

The PETLIBRO app provides advanced monitoring and control capabilities:

• Hydration Tracking: Monitor your pet's drinking habits, view trends, and track history with accurate data.
• Water Level Monitoring: Receive alerts when the water level is low, prompting you to refill.
• Filter & Cleaning Reminders: The app will notify you when it's time to change filters or clean the fountain.
• Customization: Adjust water flow modes, set daily hydration goals, and personalize settings.

Image: The PETLIBRO app interface displaying hydration history, water intake, and other smart features for pet monitoring.

Image: A PETLIBRO app notification indicating a low water level in the fountain, prompting a refill.

7. Maintenance

7.1 Regular Cleaning

For your pet's health and to ensure optimal fountain performance, clean the fountain regularly, ideally once a week.

1. Unplug the fountain and remove the water tank from the base.
2. Disassemble the stainless steel tray, water spout, and filter assembly.
3. Clean the water tank, stainless steel tray, and water spout with mild soap and water. The stainless steel tray is dishwasher-safe.
4. Rinse all components thoroughly to remove any soap residue.
5. Clean the base unit with a damp cloth. Do not submerge the base unit in water.
6. Reassemble the fountain after all parts are clean and dry.

7.2 Filter Replacement

It is recommended to replace the filter elements every two weeks to maintain water quality.

Image: Visual reminder to replace fountain filters every two weeks for optimal performance and pet health.

The Dockstream 2 utilizes a 4-layer filtration system:

• Non-woven Fabric: Traps hair and debris.
• Activated Carbon: Neutralizes odors and removes chlorine.
• Ion Exchange Resin: Softens water and removes heavy metal ions.
• Foam Filter: Provides extra protection by catching fine debris.

Image: Detailed diagram illustrating the 4-layer filtration process, including fabric, activated carbon, ion-exchange resins, and foam filter.

1. Remove the old filter elements from the filter assembly.
2. Discard the used filters.
3. Rinse the new foam filter and soak the new white filter element in water for 5 minutes.
4. Install the new filters into the filter assembly as described in Section 5.2.

8. Troubleshooting

If you encounter issues with your PETLIBRO Dockstream 2, refer to the following common problems and solutions:

If the problem persists after attempting these solutions, please contact PETLIBRO customer support.