1. Introduction
This manual provides essential information for the safe and efficient operation of your LifePlus KZB-45C Commercial Ice Maker Machine. Please read all instructions carefully before installation and use. Keep this manual for future reference.
2. Safety Instructions
- Ensure the ice maker is placed on a stable, level surface.
- Do not block ventilation openings.
- Use only potable water for ice production.
- Unplug the appliance before cleaning or maintenance.
- Keep children away from the appliance.
- Do not operate the machine if the power cord is damaged.
- Allow the unit to stand upright for 24 hours before first use after transport.
3. Product Overview
3.1 Components
The LifePlus KZB-45C Commercial Ice Maker Machine includes the following main components:
- Ice Maker Unit
- Water Inlet Hose
- Sewage Pipe
- Ice Shovel
- Ice Bags (5 included)
- Connect Kit
Figure 1: LifePlus KZB-45C Commercial Ice Maker Machine with water jug and tap water connection.
3.2 Key Features
- Quick Ice Making: Produces 45 ice cubes in 8-20 minutes, with a capacity of up to 110 lbs per 24 hours.
- Adjustable Ice Thickness: Offers three ice cube sizes (small, medium, large) by adjusting ice-making time from 5 to 23 minutes.
- Dual Water Inlet Options: Supports both bottled water and direct tap water connections.
- Automatic Self-Cleaning: Features a self-cleaning function for convenient maintenance.
- Freestanding or Undercounter Placement: Versatile design for various kitchen or bar setups.
- Smart Timer: Allows for reservation settings to prepare ice in advance.
- Durable Construction: Made with food-grade ABS, foaming layer, and food-grade steel for insulation and hygiene.
Figure 2: Fast ice production capabilities of the LifePlus KZB-45C Ice Maker.
Figure 3: Versatile placement options for the LifePlus KZB-45C Ice Maker.
Figure 4: Internal structure designed to keep ice fresh.
4. Setup
4.1 Initial Preparation
- Unpack the ice maker and remove all packaging materials.
- Clean the interior of the ice maker thoroughly before first use.
- Place the ice maker in an upright position for at least 24 hours to allow the refrigerant to settle.
- Ensure adequate ventilation around the unit (refer to product dimensions for clearance).
4.2 Water Inlet Connection
The KZB-45C supports two water inlet methods:
- Bottled Water: Connect the self-priming water inlet hose to a compatible water jug.
- Tap Water: Connect the tap water inlet hose to a potable water supply.
Figure 5: Connecting the water inlet for either bottled or tap water.
4.3 Drainage Connection
Connect the sewage pipe to the drain outlet at the back of the machine and direct it to a suitable drain.
5. Operating Instructions
5.1 Basic Operation
- Ensure the water supply is connected and the machine is plugged into a grounded power outlet.
- Press the Power button to turn on the ice maker.
- The machine will automatically begin the ice-making cycle.
- Once ice is produced, use the provided ice shovel to transfer ice to a storage container or directly for use. Note: The ice bin is not a freezer and ice will melt over time.
5.2 Adjusting Ice Thickness
The ice maker allows you to adjust the thickness of the ice cubes:
- During operation, press and hold the Up or Down buttons for 3 seconds.
- Adjust the ice-making time between 5 and 23 minutes to achieve desired thickness. Shorter times result in smaller, thinner ice; longer times produce larger, thicker ice.
- Release the button to set the new ice-making time.
Figure 6: Options for adjusting ice cube thickness.
5.3 Reservation Function
To set a delayed start for ice production:
- Press the Reservation button.
- Use the Up or Down buttons to set the desired delay time.
- The machine will start ice production after the set delay.
5.4 Product Demonstration Video
Video 1: This video demonstrates the features and operation of the LifePlus KZB-45C Commercial Ice Maker, including water inlet options, ice production, and self-cleaning.
6. Maintenance
6.1 Automatic Self-Cleaning
The ice maker features an automatic self-cleaning function:
- Ensure the machine is connected to a water supply.
- Press the Clean button on the control panel.
- The machine will initiate a cleaning cycle, circulating water to clean internal components.
- After the cleaning cycle, open the drain plug to discharge the wastewater.
Figure 7: Illustration of the automatic cleaning process.
6.2 Regular Cleaning
- Regularly wipe down the exterior with a soft, damp cloth.
- Clean the ice storage bin periodically with a mild detergent and rinse thoroughly.
- Ensure the water inlet and drainage pipes are free from blockages.
7. Troubleshooting
Refer to the table below for common issues and their solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| No ice production | No water supply; power off; ambient temperature too high. | Check water connection; ensure power is on; operate in a cooler environment. |
| Ice cubes are too small/large | Incorrect ice-making time setting. | Adjust ice-making time using the Up/Down buttons (5-23 minutes). |
| Water leakage | Loose connections; clogged drain pipe. | Check all hose connections; clear any blockages in the drain pipe. |
| Machine is noisy | Normal compressor/fan operation; unit not level. | Ensure the unit is on a level surface. Some operational noise is normal. |
8. Specifications
| Feature | Detail |
|---|---|
| Model Number | KZB-45C |
| Brand | LifePlus |
| Product Dimensions | 14"D x 14.5"W x 24.8"H |
| Weight | 43 Pounds |
| Ice Production Capacity | Up to 110 LBS / 24H |
| Ice Cube Per Cycle | 45 Ice Cubes |
| Ice Making Cycle Time | 8-20 Minutes (adjustable 5-23 minutes) |
| Voltage | 110 Volts |
| Ice Storage Capacity | Up to 10 LBS |
9. Warranty and Support
For warranty information, technical support, or service inquiries, please contact LifePlus customer service directly. Refer to your purchase documentation or the manufacturer's website for specific warranty terms and contact details.
Figure 8: Included accessories for the LifePlus KZB-45C Ice Maker.
