ICEVOKE Nugget Ice Maker Countertop User Manual

1. Introduction

This manual provides essential information for the safe and efficient operation of your ICEVOKE Nugget Ice Maker. Please read all instructions carefully before use and retain this manual for future reference.

The ICEVOKE countertop ice maker is designed to produce chewable nugget ice quickly, with a capacity of up to 45 lbs per day. It features a 1.5L internal water tank, a 3.5L external water tank, and an auto-cleaning function for convenience.

Image 1.1: ICEVOKE Nugget Ice Maker showing quick ice production and ice basket capacity.

2. Safety Instructions

To reduce the risk of fire, electric shock, or injury, always follow these basic safety precautions:

• Read all instructions before operating the appliance.
• Ensure the voltage matches the rating label on the appliance.
• Do not immerse the power cord, plug, or any part of the appliance in water or other liquids.
• Unplug the appliance from the outlet when not in use and before cleaning.
• Do not operate any appliance with a damaged cord or plug, or after the appliance malfunctions or has been damaged in any manner.
• This appliance uses R600a refrigerant. Ensure proper ventilation and do not obstruct ventilation openings.
• Keep the appliance away from heat sources and direct sunlight.
• Use only potable water in the water tank.
• Do not allow children to operate the ice maker without supervision.

3. Package Contents

Carefully unpack your ICEVOKE Nugget Ice Maker and check that all items are present and in good condition:

• ICEVOKE Nugget Ice Maker Unit
• Side Water Tank (3.5L capacity)
• Ice Tray
• Ice Scoop
• User Manual

4. Setup

1. Placement: Place the ice maker on a stable, level surface, away from direct sunlight and heat sources. Ensure there is at least 15 cm (6 inches) of space around the appliance for proper ventilation.
2. Initial Cleaning: Before first use, clean the internal components. Refer to the 'Maintenance and Cleaning' section for detailed instructions.
3. Fill Water Tank: Open the lid of the internal water tank (1.5L) or attach and fill the external side water tank (3.5L) with potable water. Do not exceed the 'MAX' fill line.
4. Connect Power: Plug the power cord into a grounded electrical outlet (120 Volts).

5. Operating Instructions

Your ICEVOKE Nugget Ice Maker is designed for user-friendly operation.

Image 5.1: Touch panel controls and indicators.

1. Power On: Press the On/Off Button on the touch panel to start the ice making process. The indicator light will illuminate.
2. Ice Production: The appliance will begin producing nugget ice. The first batch of ice is typically ready in approximately 10 minutes. Subsequent batches may be faster.
3. Ice Full Indicator: When the ice basket is full, the "ICE FULL" indicator will light up, and the ice making process will automatically pause. Remove ice from the basket to resume production.
4. Add Water Indicator: If the water level in the tank is too low, the "ADD WATER" indicator will light up. Refill the water tank to continue ice production.
5. Night Light Function: Press the Night Light Button to illuminate the internal ice making area, allowing you to monitor ice production even in low light conditions.
6. Power Off: Press the On/Off Button again to turn off the appliance.

Image 5.2: Overview of ice maker performance metrics.

6. Maintenance and Cleaning

Regular cleaning ensures optimal performance and hygiene of your ice maker.

1. Auto-Cleaning Function: With water in the tank, press and hold the "Clean" Button for 3 seconds. The ice maker will perform a 5-minute self-cleaning cycle. After the cycle, drain the water.
2. Recommended Cleaning Frequency: It is recommended to clean your ice maker at least once a week to maintain ice freshness and prevent mineral buildup.
3. Manual Cleaning:
   • Unplug the appliance before cleaning.
   • Remove the ice basket and any remaining ice.
   • Drain all water from the internal and external water tanks.
   • Wipe the interior with a soft cloth dampened with a mild detergent solution. Rinse thoroughly with clean water.
   • Clean the exterior with a soft, damp cloth. Do not use abrasive cleaners or solvents.
   • Ensure all parts are dry before reassembling and operating.
4. Material Safety: The ice boxes and water tanks are made from food-grade materials to ensure the hygiene and safety of the ice cubes.

7. Troubleshooting

Refer to this section for common issues and their solutions.

• No Ice Production / "ADD WATER" Indicator On: The water tank is empty or the water level is too low. Refill the water tank with potable water.
• Ice Production Stops / "ICE FULL" Indicator On: The ice basket is full. Remove ice to allow production to resume.
• Unusual Noise: The ice maker operates at less than 50 dB. Two distinct 'roaring sounds' indicate either a lack of water or a full ice basket, prompting you to add water or remove ice. If other loud or unusual noises occur, ensure the unit is on a level surface and check for any obstructions.
• Slow Ice Production: Ensure the ambient temperature is not excessively high and the unit has adequate ventilation. Clean the condenser if necessary (refer to Maintenance).
• Water Leakage: Ensure the external water tank is correctly seated and sealed. Check for any cracks or damage to the water tanks or hoses.

8. Specifications

Image 8.1: Product dimensions and low noise feature.

9. Warranty and Support

The ICEVOKE Nugget Ice Maker has passed ETL certification, ensuring safety and quality standards.

ICEVOKE is committed to providing high-quality products. If you have any questions regarding the use, maintenance, or troubleshooting of your pellet ice maker, please contact our customer support team. We are available to assist you at any time.