ADDIESDIVE AD2527 Automatic Watch Instruction Manual

1. Introduction

Thank you for choosing the ADDIESDIVE AD2527 Automatic Watch. This timepiece features a reliable Japanese Miyota 8215 automatic movement, a luminous display, and 100 meters of water resistance. This manual provides essential information for the proper setup, operation, and care of your watch.

Figure 1: Front view of the ADDIESDIVE AD2527 Automatic Watch.

2. Setup

2.1 Initial Winding

Your AD2527 watch is powered by an automatic mechanical movement. It winds itself through the motion of your wrist. If the watch has stopped or has low power reserve, it can be manually wound:

1. Ensure the crown is in position 1 (fully pushed in).
2. Unscrew the crown counter-clockwise until it pops out to position 2.
3. Turn the crown clockwise approximately 20-30 times. This will provide sufficient power to start the watch.
4. Push the crown back in and screw it down clockwise to ensure water resistance.

2.2 Setting the Time

1. Unscrew the crown counter-clockwise until it pops out to position 2.
2. Pull the crown out to position 3. The second hand will stop (hacking feature).
3. Turn the crown to set the hour and minute hands. To avoid confusion between AM/PM for the date change, advance the hands past 12 o'clock. If the date changes, you are in the AM hours.
4. Once the correct time is set, push the crown back to position 2.

2.3 Setting the Date

1. Ensure the crown is in position 2 (unscrewed, but not pulled out).
2. Turn the crown counter-clockwise to adjust the date.
3. Set the date to the day before the current date. For example, if today is the 15th, set the date to the 14th.
4. Pull the crown out to position 3 and advance the time past 12 AM until the date changes to the current date. Continue setting the time to the current hour, ensuring correct AM/PM.
5. Push the crown back in and screw it down clockwise to ensure water resistance.

Figure 2: Close-up of the watch dial, crown, and date display.

3. Operating Instructions

3.1 Automatic Movement

The AD2527 is equipped with a Japanese Miyota 8215 automatic movement. This movement is self-winding, meaning it gains power from the natural motion of your arm. When fully wound, it has a power reserve of approximately 41 hours. If the watch is not worn for an extended period, it may stop and require manual winding as described in Section 2.1.

Figure 3: The AD2527 watch highlighting its 8215 automatic movement.

3.2 Luminous Display

The watch features BGW9 Super Luminous material on its hands and hour markers. This material absorbs light and glows in low-light conditions, providing visibility in the dark. The intensity and duration of the glow depend on the exposure to light.

Figure 4: The watch dial displaying its BGW9 luminous properties in darkness.

3.3 Water Resistance

The AD2527 watch is water-resistant to 100 meters (330 feet). This makes it suitable for swimming, snorkeling, and recreational diving. However, it is crucial to ensure the crown is fully screwed down before any contact with water. Do not operate the crown while the watch is wet or submerged.

4. Maintenance

4.1 Cleaning

To maintain the appearance of your watch:

• Wipe the case and bracelet with a soft, dry cloth regularly.
• For stainless steel, a slightly damp cloth can be used, followed by immediate drying.
• Avoid using harsh chemicals, solvents, or abrasive cleaners.

4.2 Storage

When not wearing your watch for extended periods, store it in a cool, dry place away from direct sunlight and strong magnetic fields. A watch box or pouch is recommended to protect it from dust and scratches.

4.3 Service

Mechanical watches benefit from periodic servicing to ensure optimal performance and longevity. It is recommended to have your watch inspected by a qualified watchmaker every 3-5 years.

5. Troubleshooting

• Watch Not Running: If the watch has stopped, it may need to be manually wound. Follow the steps in Section 2.1. If it still does not run after winding, contact customer support.
• Date Not Changing: Ensure the time is set correctly for AM/PM. The date typically changes around midnight. If the date changes at noon, you have set the time incorrectly by 12 hours. Adjust the time accordingly.
• Water Intrusion: If you notice condensation or water inside the watch, immediately take it to a professional watchmaker for inspection and repair to prevent further damage.

6. Specifications

Figure 5: Key dimensions and weight of the AD2527 watch.

7. Bracelet Adjustment

The stainless steel bracelet can be adjusted to fit your wrist. This typically involves removing or adding links. It is recommended to have this procedure performed by a professional jeweler or watch repair service to avoid damaging the bracelet or watch.

Figure 6: Detail of the double locking foldover clasp.

8. Warranty and Support

8.1 Warranty Information

This product is covered by a seller warranty. For specific details regarding the warranty period and coverage, please refer to your purchase documentation or contact the seller directly.

8.2 Customer Support

For any questions, technical assistance, or service requests, please contact ADDIESDIVE customer support through the retailer where the watch was purchased or visit the official ADDIESDIVE brand store online.

Official ADDIESDIVE Brand Store: ADDIESDIVE Store

9. Product Overview Video