1. Introduction
Thank you for choosing the AIYIMA P600 6.5" Bookshelf Speakers. These passive speakers are designed to deliver high-fidelity audio for desktop and home audio stereo systems. This manual provides essential information for proper setup, operation, and maintenance to ensure optimal performance and longevity of your speakers.
2. Product Overview
2.1 Package Contents
- One pair of AIYIMA P600 Passive Bookshelf Speakers
- User Manual
- Rubber Feet (8 pieces)
Image: The AIYIMA P600 speakers shown with the user manual and rubber feet included in the package.
2.2 Key Features
- 6° Elevated Design: The unique 6-degree upward-tilting baffle design angles tweeters towards your ears for an optimized desktop listening experience.
- Carbon Fiber Woofer: Equipped with a 6.5-inch carbon fiber composite cone woofer for tight, precise, and impactful low-frequency performance down to 30Hz.
- Silk Dome Horn Tweeter: Features a 25mm imported silk dome tweeter loaded into an acoustic horn waveguide for detailed and smooth high-frequency reproduction.
- Solid Build Quality: Constructed with an 18mm thick MDF front baffle and 15mm walls to minimize resonance, with high-quality polyfill damping.
- Gold-plated Binding Posts: Ensures maximum signal transfer from your amplifier.
Image: A detailed view highlighting the 25mm silk dome horn tweeter and the 6.5-inch carbon fiber woofer of the AIYIMA P600 speaker.
Image: A diagram showing the side profile of the AIYIMA P600 speaker, emphasizing its 6-degree upward tilt.
3. Setup
3.1 Speaker Placement
For optimal sound, place the speakers on a stable surface such as a desktop or speaker stands. The 6-degree tilted design is specifically engineered for desktop listening, directing sound towards your ears. Ensure there is adequate space around the speakers for proper sound dispersion and to prevent obstruction of the rear port (if applicable).
3.2 Connecting to an Amplifier
The AIYIMA P600 are passive speakers and require an external amplifier or AV receiver to operate. Follow these steps to connect your speakers:
- Ensure your amplifier/receiver is turned off and unplugged from the power outlet.
- Use high-quality speaker wire to connect the speakers to the amplifier. Match the positive (+) terminal on the speaker (red) to the positive (+) terminal on the amplifier, and the negative (-) terminal on the speaker (black) to the negative (-) terminal on the amplifier.
- The P600 speakers feature gold-plated binding posts for secure and efficient connections. Unscrew the binding post cap, insert the stripped speaker wire, and tighten the cap firmly.
- Once both speakers are connected, plug in and turn on your amplifier/receiver.
Image: A close-up view of the gold-plated binding posts on the back of an AIYIMA P600 speaker, showing the connection terminals.
Image: A comprehensive diagram illustrating how different audio sources (CD player, pre-amplifier, streamer, DAC, computer) connect to an amplifier (e.g., AIYIMA A20), which then outputs to the AIYIMA P600 passive speakers.
4. Operating Instructions
Once properly connected to an amplifier, the AIYIMA P600 speakers are ready for use. Control volume and source selection through your connected amplifier or audio source device. Ensure the amplifier's power output is within the recommended range for the P600 speakers (up to 150 Watts) to prevent damage.
5. Maintenance
To maintain the appearance and performance of your AIYIMA P600 speakers, follow these guidelines:
- Cleaning: Use a soft, dry cloth to wipe down the speaker cabinets. Avoid abrasive cleaners or solvents, as they may damage the finish.
- Dust Removal: Gently use a soft brush or a vacuum cleaner with a brush attachment to remove dust from the speaker cones and grilles.
- Environment: Keep speakers away from direct sunlight, excessive heat, moisture, and extreme temperature changes.
- Handling: Avoid touching the speaker cones directly, as this can cause damage.
6. Troubleshooting
If you encounter issues with your AIYIMA P600 speakers, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| No sound from speakers | Loose speaker wire connections; Amplifier not powered on or set to correct input; Amplifier malfunction. | Check all speaker wire connections at both the speaker and amplifier ends. Ensure amplifier is powered on and the correct input source is selected. Test amplifier with other speakers if available. |
| Distorted or unclear sound | Overdriving speakers (volume too high); Incorrect impedance match; Damaged speaker wire; Amplifier issues. | Reduce volume. Ensure amplifier impedance matches speaker impedance (4 Ohm). Inspect speaker wires for damage. Consult amplifier manual for troubleshooting. |
| One speaker not working | Faulty speaker wire; Loose connection; Amplifier channel issue. | Swap speaker wires between left and right channels at the amplifier to determine if the issue is with the speaker or the amplifier channel/wire. Check connections. |
If the problem persists after trying these solutions, please contact AIYIMA customer support or your retailer for further assistance.
7. Specifications
| Feature | Specification |
|---|---|
| Model Name | P600 |
| Speaker Type | Bookshelf, Passive |
| Woofer Size | 6.5 Inches (Carbon Fiber) |
| Tweeter Type | 25mm Silk Dome Horn Tweeter |
| Frequency Response | 30Hz-20kHz |
| Impedance | 4 Ohm |
| Speaker Maximum Output Power | 150 Watts |
| Product Dimensions (each) | 10.63"D x 8.27"W x 13.98"H (270mm D x 210mm W x 355mm H) |
| Item Weight (pair) | 27.7 pounds (12.57 Kilograms) |
| Material | Wood (MDF) |
| Connectivity Technology | Wired |
8. Warranty and Support
8.1 Warranty Information
The AIYIMA P600 speakers come with a Limited Warranty. Please refer to the warranty card included in your package or visit the official AIYIMA website for detailed terms and conditions regarding warranty coverage and duration.
8.2 Customer Support
For technical assistance, troubleshooting, or any inquiries regarding your AIYIMA P600 speakers, please contact AIYIMA customer support. You can find contact information on the official AIYIMA website or through your purchase retailer.
