Introduction
This manual provides comprehensive instructions for the installation, maintenance, and understanding of your Futanwei Tempered Glass Screen Protector for the Hwagol I130 Smart Watch. This product is designed to protect your device's screen from scratches, impacts, and smudges while maintaining optimal display clarity and touch sensitivity.

This image highlights the compatibility of the screen protector with the Hwagol I130 Smart Watch.
Product Features
- Compatibility: Specifically designed for the Hwagol I130 (1.52 Inches) Smart Watch, ensuring a precise fit.
- 9H Hardness: Constructed from 9H-hardened tempered glass for superior scratch and impact resistance.
- Oleophobic and Hydrophobic Coating: Features a special coating that repels sweat, oil, and fingerprints, making the screen easy to clean and resistant to smudges.
- High Transparency: Offers 99.9% light transmission, preserving the original display quality, colors, and clarity of your smartwatch screen.
- High Touch Sensitivity: Maintains the original touch responsiveness of your device, allowing for smooth and accurate interaction.
- Bubble-Free Application: Engineered for easy, bubble-free installation when following the provided instructions.
- Perfect Adhesion: Designed for strong and reliable adhesion to the screen surface.

This image displays key features of the screen protector, including Ultra HD Clarity, High Transparency, Oleophobic properties, 9H Hardness, Scratch Resistance, Easy Installation, and Perfect Adhesion.
Installation Guide
Follow these steps carefully for a successful, bubble-free installation of your screen protector.

This image illustrates the four-step installation process for the screen protector.
- Step 1: Clean the Screen
Using the included wet wipe (labeled "1"), gently clean the surface of your Hwagol I130 Smart Watch screen. Immediately follow with the dry wipe (labeled "2") to remove any moisture or residue. Ensure the screen is completely dry and free of smudges. - Step 2: Remove Dust
Utilize the provided dust absorber sticker to carefully lift any remaining dust particles from the screen. Inspect the screen closely under good lighting to ensure no dust remains. - Step 3: Peel the Protective Film
Carefully peel off the protective film from the adhesive side of the screen protector. Avoid touching the adhesive surface to prevent fingerprints or dust contamination. - Step 4: Align and Apply
Align the screen protector precisely with the edges and cutouts of your Hwagol I130 Smart Watch screen. Once aligned, gently press the middle part of the protector with your finger. The adhesive will spread outwards. If necessary, gently push any remaining air bubbles towards the edges with a soft cloth.
Operating Information
The Futanwei Tempered Glass Screen Protector is a passive protective accessory. Once correctly installed, it requires no active operation. Its function is to provide a durable, transparent layer over your smartwatch screen, safeguarding it from daily wear and tear while preserving the device's original touch functionality and display quality.

This image demonstrates the maintained touch sensitivity of the smartwatch screen after the protector is applied.
Maintenance
To ensure the longevity and clarity of your screen protector, follow these simple maintenance tips:
- Cleaning: Gently wipe the screen protector with a soft, lint-free cloth. For stubborn smudges or fingerprints, slightly dampen the cloth with water or a screen-safe cleaning solution. Avoid harsh chemicals or abrasive materials.
- Avoid Sharp Objects: While the protector is highly scratch-resistant (9H hardness), extreme pressure or very sharp objects can still cause damage.
- Storage: If removing the protector for any reason, store it carefully to prevent dust accumulation on the adhesive side.
Troubleshooting
Here are solutions to common issues you might encounter during or after installation:
- Bubbles After Installation:
- Small Bubbles: Often, small bubbles will disappear on their own within 24-48 hours as the adhesive fully settles.
- Large Bubbles/Dust Particles: If a bubble persists or appears to be caused by a dust particle, gently lift the nearest corner of the screen protector with a fingernail or a thin card. Use a dust absorber sticker to remove the dust, then re-apply the protector.
- Misalignment: If the protector is significantly misaligned, carefully lift it from one corner and re-align before re-applying. Be cautious not to bend the protector excessively.
- Edges Not Sticking: Ensure the screen is perfectly clean and dry, especially around the edges. Press firmly along the edges after application. If the issue persists, the screen protector might be slightly misaligned or the screen itself might have a subtle curve not fully compatible with rigid glass protectors.

This image illustrates the desired bubble-free application of the screen protector.
Specifications
| Compatible Device | Hwagol I130 Smart Watch (1.52 Inches) |
| Material | Tempered Glass |
| Item Hardness | 9H |
| Special Features | Anti-Scratch, Bubble Free, Oleophobic, Hydrophobic, High Transparency, High Touch Sensitivity |
| Product Dimensions | 3"L x 2"W (approximate, for packaging) |
| Item Weight | 0.32 ounces (approximate, for packaging) |
| Light Transmission | 99.9% |
Warranty and Support
Futanwei is committed to providing high-quality products. While specific warranty details are not provided in this manual, please retain your proof of purchase. For any questions, concerns, or support regarding your Futanwei Hwagol I130 Smart Watch Screen Protector, please contact the seller or Futanwei customer service through the platform where the purchase was made. They can assist with product inquiries, installation issues, or potential defects.