1. Introduction
Thank you for purchasing the NOTABRICK Bluetooth Speaker Model Vi. This manual provides essential information for setting up, operating, and maintaining your speaker. Please read these instructions carefully before use to ensure optimal performance and longevity of your device.
2. Safety Information
- Do not expose the speaker to extreme temperatures or direct sunlight for extended periods.
- Avoid dropping or subjecting the speaker to strong impacts.
- Keep the speaker away from medical devices to prevent interference.
- Do not attempt to disassemble, repair, or modify the speaker yourself. Contact qualified service personnel.
- Ensure the charging port cover is securely closed when using the speaker near water to maintain IPX7 waterproof rating.
- Use only the provided charging cable or a certified equivalent.
3. Package Contents
Verify that all items are present in your package:
- NOTABRICK Bluetooth Speaker Vi
- USB Type-C Charging Cable
- User Manual (this document)
- Carrying Strap (optional, may be included)
4. Product Overview
Familiarize yourself with the speaker's components and controls.
Image 1: NOTABRICK Bluetooth Speaker Vi, highlighting its IPX7 waterproof capability with water splashes.
Control Buttons:
- Power Button: Press and hold to power on/off. Short press to check battery status.
- Play/Pause Button: Play or pause music. Answer/end calls.
- Volume Up (+): Increase volume. Long press for next track.
- Volume Down (-): Decrease volume. Long press for previous track.
- Light Mode Button: Cycle through RGB light modes. Press and hold to turn lights off.
- Bluetooth/TWS Button: Short press to enter Bluetooth pairing mode. Long press to initiate TWS pairing.
5. Setup
5.1 Charging the Speaker
- Locate the Type-C charging port on the speaker.
- Connect the provided USB Type-C cable to the speaker's charging port.
- Connect the other end of the USB cable to a compatible USB power adapter (not included) or a computer's USB port.
- The charging indicator light will illuminate. A full charge typically takes less than 4 hours.
- Once fully charged, the indicator light will change or turn off. Disconnect the charging cable.
Note: Ensure the charging port cover is sealed after charging to maintain waterproof integrity.
5.2 Powering On/Off
- To Power On: Press and hold the Power Button for approximately 3 seconds until you hear an audible prompt and the indicator lights turn on.
- To Power Off: Press and hold the Power Button for approximately 3 seconds until you hear an audible prompt and the indicator lights turn off.
5.3 Bluetooth Pairing
- Ensure the speaker is powered on and within 1 meter of your Bluetooth device.
- The speaker will automatically enter Bluetooth pairing mode, indicated by a flashing blue LED. If not, short press the Bluetooth/TWS button.
- Enable Bluetooth on your device (smartphone, tablet, laptop).
- Search for "NOTABRICK Vi" in the list of available Bluetooth devices.
- Select "NOTABRICK Vi" to connect. Once connected, you will hear an audible confirmation, and the blue LED will stop flashing.
- The speaker will automatically reconnect to the last paired device when powered on, if available.
5.4 Wireless Pairing (True Wireless Stereo - TWS)
This feature allows you to pair two NOTABRICK Vi speakers for a 60W stereo surround sound experience.
- Ensure both NOTABRICK Vi speakers are powered on and not connected to any Bluetooth device.
- On one speaker (this will be the primary speaker), long press the Bluetooth/TWS button for 2-3 seconds. You will hear a prompt indicating TWS pairing mode.
- The primary speaker will automatically search for the secondary speaker. Once connected, you will hear a confirmation sound.
- Now, enable Bluetooth on your device and connect to the primary speaker ("NOTABRICK Vi"). Both speakers will play audio in stereo.
- To disconnect TWS, long press the Bluetooth/TWS button on either speaker.
6. Operating Instructions
6.1 Music Playback
- Play/Pause: Short press the Play/Pause button.
- Next Track: Long press the Volume Up (+) button.
- Previous Track: Long press the Volume Down (-) button.
- Volume Up: Short press the Volume Up (+) button.
- Volume Down: Short press the Volume Down (-) button.
6.2 Call Management
When connected to a smartphone via Bluetooth, you can manage calls directly from the speaker.
- Answer/End Call: Short press the Play/Pause button.
- Reject Call: Long press the Play/Pause button.
- Activate Voice Assistant (Siri): Double-press the Play/Pause button.
6.3 RGB Light Modes
The speaker features dynamic RGB lighting with multiple modes.
Image 2: Overview of the NOTABRICK Bluetooth Speaker Vi's RGB lighting effects and modes.
- Change Light Mode: Short press the Light Mode button to cycle through the 7 light colors and 6 light modes.
- Turn Lights Off: Long press the Light Mode button.
6.4 AUX Mode
The speaker supports audio input via an AUX cable (not included) for non-Bluetooth devices.
- Connect one end of a 3.5mm AUX cable to the speaker's AUX input port.
- Connect the other end to the audio output of your device.
- The speaker will automatically switch to AUX mode.
- Control playback and volume from your connected device.
7. Maintenance
- Cleaning: Wipe the speaker with a soft, damp cloth. Do not use abrasive cleaners or solvents.
- Storage: Store the speaker in a cool, dry place away from direct sunlight and extreme temperatures.
- Battery Care: To prolong battery life, fully charge the speaker at least once every three months if not in regular use.
8. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Speaker does not power on. | Low battery. | Charge the speaker fully. |
| Cannot pair via Bluetooth. | Bluetooth not enabled on device; speaker not in pairing mode; too far from device. | Ensure Bluetooth is on, speaker is in pairing mode (flashing blue LED), and within range (30 meters). Forget previous connections on your device and try again. |
| No sound. | Volume too low; speaker paused; incorrect input mode. | Increase volume on both speaker and device. Press Play/Pause. Ensure correct mode (Bluetooth/AUX). |
| TWS pairing fails. | Speakers already connected to other devices; speakers too far apart. | Disconnect both speakers from any Bluetooth devices. Ensure they are close to each other (within 1 meter) and try TWS pairing again. |
| RGB lights not working. | Lights turned off; malfunction. | Short press the Light Mode button to cycle through modes. If still not working, contact support. |
9. Specifications
Image 3: NOTABRICK V3 Acoustic Technology, illustrating internal speaker components and key specifications.
| Model Name: | Vi |
| Brand: | NOTABRICK |
| Speaker Type: | Portable Outdoor Speaker |
| Connectivity: | Bluetooth 5.0 |
| Bluetooth Range: | Up to 30 meters (100 feet) |
| Audio Output: | 30W Stereo Sound (60W with TWS pairing) |
| Drivers: | Dual full-range 40mm drivers |
| Frequency Response: | 115Hz - 15KHz |
| Battery Capacity: | 3600mAh |
| Charging Time: | Less than 4 hours (via Type-C) |
| Playtime: | Up to 1000 minutes (approx. 16.6 hours, varies by volume and light usage) |
| Waterproof Rating: | IPX7 |
| Dimensions: | 2.7"D x 2.7"W x 8.3"H |
| Weight: | 0.65 kg (1.43 lbs) |
| Control Method: | Touch, Voice (Siri) |
10. Warranty and Support
The NOTABRICK Bluetooth Speaker Vi comes with a limited warranty. Please refer to the warranty card included in your package for specific terms and conditions.
For technical support, troubleshooting assistance, or warranty claims, please contact NOTABRICK customer service through the retailer where you purchased the product or visit the official NOTABRICK website.
Manufacturer: NOTABRICK
Model Number: Vi
Date First Available: August 18, 2025
