1. Introduction
This manual provides essential information for the correct installation, use, and maintenance of your KikkaBoo i-MOOVE 2 i-Size car seat. Please read these instructions carefully before use and keep them for future reference. This car seat is designed for children from 40 to 150 cm in height, complying with the UN R129/04 i-Size standard.
2. Important Safety Information
- Always ensure the car seat is correctly installed according to this manual.
- Never leave a child unattended in the car seat.
- Ensure the child's harness is snug and correctly adjusted before every journey.
- Do not use the car seat if it has been involved in an accident, even if there is no visible damage.
- Only use accessories and replacement parts approved by KikkaBoo.
- The car seat must be secured with ISOFIX and Top Tether when used in forward-facing mode (76-150 cm) and rear-facing mode (40-105 cm).
Image: The KikkaBoo i-MOOVE 2 i-Size car seat highlighting its compliance with ECE R129 standard and crash test approval.
3. Product Components
Familiarize yourself with the various parts of your KikkaBoo i-MOOVE 2 car seat:
- Headrest: Adjustable to 24 positions.
- 5-Point Harness: With soft shoulder and buckle pads.
- Side Impact Protection (SPS): Integrated for enhanced safety.
- ISOFIX Connectors: For secure attachment to vehicle's ISOFIX anchor points.
- Top Tether Strap: Provides additional stability and reduces forward movement.
- Rotation Mechanism: Allows 360° rotation of the seat.
- Recline Adjustment Lever: For selecting recline positions.
- Infant Reducer Cushion: Full-body cushion for newborns and smaller infants.
- Washable Cover: Removable fabric cover for cleaning.
Image: Overview of the KikkaBoo i-MOOVE 2 car seat, showcasing its design and key features.
4. Setup and Installation
4.1 Vehicle Compatibility
This i-Size car seat is compatible with vehicles equipped with ISOFIX anchor points and a Top Tether attachment point. Refer to your vehicle's owner's manual to locate these points.
4.2 Installing the Car Seat (ISOFIX & Top Tether)
- Prepare the Car Seat: Ensure the ISOFIX connectors are extended. Press the ISOFIX release buttons (usually red) and pull the connectors out.
- Position the Seat: Place the car seat on the vehicle seat.
- Engage ISOFIX: Push the ISOFIX connectors onto the vehicle's ISOFIX anchor points until you hear a distinct "click" and the indicators turn green. Pull firmly on the car seat to ensure it is securely attached.
- Attach Top Tether: Locate the Top Tether strap at the back of the car seat. Route it over the vehicle seat back and attach the hook to the designated Top Tether anchor point in your vehicle. Tighten the strap until the indicator (if present) shows it is correctly tensioned.
- Final Check: Verify that the car seat is firmly installed and does not move excessively.
Image: Visual guide for secure installation using ISOFIX and Top Tether.
4.3 Rear-Facing Installation (40-105 cm)
For infants and toddlers up to 105 cm, the car seat must be installed in a rear-facing position. Follow the general ISOFIX and Top Tether installation steps. Ensure the seat is rotated to the rear-facing position before securing the child.
Image: Demonstrates placing a child in the rear-facing car seat.
4.4 Forward-Facing Installation (76-150 cm)
For children from 76 cm to 150 cm, the car seat can be used in a forward-facing position. Follow the general ISOFIX and Top Tether installation steps. Ensure the seat is rotated to the forward-facing position.
5. Operating Instructions
5.1 360° Rotation Function
The i-MOOVE 2 features a 360° rotation mechanism for easy access. To rotate the seat:
- Ensure the car seat is not under tension from the Top Tether (slightly loosen if necessary).
- Locate the rotation release lever (usually at the front base of the seat).
- Press the lever and rotate the seat to the desired position (e.g., facing the car door for child placement, or rear/forward-facing for travel).
- Release the lever and ensure the seat locks securely into place.
Image: The 360° rotation feature for easy child access.
5.2 Recline Positions
The car seat offers multiple recline positions for child comfort:
- Rear-Facing: 1 recline position.
- Forward-Facing: 3 recline positions.
To adjust the recline, locate the recline adjustment lever (usually under the front edge of the seat). Press the lever and move the seat to the desired recline angle. Release the lever and ensure it locks into position.
Image: Illustration of the available recline positions for optimal comfort.
5.3 Headrest and Harness Adjustment
The headrest and harness system adjust simultaneously to accommodate your child's growth. The headrest has 24 adjustable positions.
- Locate the headrest adjustment handle (usually at the top back of the headrest).
- Squeeze the handle and move the headrest up or down until the shoulder straps are at or just below your child's shoulders for rear-facing, or at or just above for forward-facing.
- Release the handle to lock the headrest and harness in place.
Image: Adjusting the headrest to one of its 24 positions.
5.4 Securing Your Child
- Place your child in the car seat.
- Bring the two buckle tongues together and insert them into the buckle until you hear a "click".
- Pull the harness adjustment strap (usually at the front of the seat) to tighten the harness until it is snug against your child's body. Ensure you can only fit one finger between the harness and your child's collarbone.
- Check that the shoulder pads are correctly positioned.
6. Care and Maintenance
- Cleaning the Fabric Cover: The fabric cover is removable and washable. Refer to the care label on the cover for specific washing instructions (typically machine wash cold on a delicate cycle). Do not tumble dry.
- Cleaning the Shell: Wipe the plastic and metal parts of the car seat with a damp cloth and mild soap. Do not use abrasive cleaners or solvents.
- Harness Care: Do not machine wash the harness straps. Wipe them clean with a damp cloth.
- Storage: When not in use, store the car seat in a cool, dry place away from direct sunlight.
Image: Demonstrates the removable and washable fabric cover for easy cleaning.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Car seat feels loose after installation. | ISOFIX connectors not fully engaged, Top Tether not tight enough. | Ensure ISOFIX indicators are green. Tighten Top Tether strap firmly. Push the car seat firmly into the vehicle seat back. |
| Harness is difficult to tighten or loosen. | Harness straps twisted, child's clothing interfering. | Check for twists in the harness straps. Ensure no clothing is caught in the buckle or adjuster. |
| Seat rotation mechanism is stuck. | Rotation lever not fully pressed, seat under tension. | Ensure the rotation lever is fully depressed. Slightly lift the seat or adjust its position to relieve tension before rotating. |
8. Technical Specifications
| Feature | Specification |
|---|---|
| Model | i-MOOVE 2 |
| Standard | UN R129/04 (i-Size) |
| Child Height Range | 40 - 150 cm |
| Approximate Age Range | Birth to approx. 12 years |
| Installation Method | ISOFIX + Top Tether |
| Rotation | 360° |
| Recline Positions | 1 (rear-facing), 3 (forward-facing) |
| Headrest Positions | 24 |
| Harness System | 5-point harness |
| Side Protection | SPS (Side Impact Protection System) |
| Product Dimensions | 50 x 44 x 60 cm |
| Product Weight | 10.68 kg |
| Materials | Polypropylene, Steel, Polyester, EPS, EPE |
9. Warranty and Support
For warranty information, please refer to the documentation provided at the time of purchase or visit the official KikkaBoo website. For technical support, spare parts, or any inquiries not covered in this manual, please contact KikkaBoo customer service through their official channels.
You can find more information and contact details on the KikkaBoo Brand Store.
