Introduction
Thank you for choosing the ATK x QK Hex80 HE Magnetic Gaming Keyboard. This manual provides essential information for setting up, operating, maintaining, and troubleshooting your new keyboard. Please read it thoroughly to ensure optimal performance and longevity of your device.
Image: The ATK x QK Hex80 HE Magnetic Gaming Keyboard, showcasing its design and RGB lighting.
Package Contents
Verify that all items listed below are included in your package:
- ATK x QK Hex80 Keyboard
- Custom Carrying Case
- 8K USB Cable
- Switch & Keycap Puller
- 4 Backup Switches
- User Manual (this document)
- Quick Start Guide
Image: Contents of the ATK x QK Hex80 keyboard package, including the keyboard, carrying case, USB cable, switch/keycap puller, and documentation.
Setup
Connecting the Keyboard
- Unpack the ATK x QK Hex80 keyboard and its accessories.
- Connect the provided USB-C cable to the keyboard's USB-C port.
- Connect the other end of the USB-C cable to an available USB port on your computer.
- The keyboard will automatically be recognized by your operating system.
Software Installation (ATK HUB)
For full customization and advanced features, download and install the ATK HUB software from the official ATK website (www.atk.pro). The ATK HUB supports web and desktop versions, offering features like custom dynamic keystroke, adjustable 0 deadzone, Rapid Trigger (RT), and SOCD/RS support.
Video: An unboxing and initial setup guide for the ATK QK Hex 80 Gaming Keyboard, demonstrating how to connect the device and access its features.
Operating Instructions
Key Features and Customization
The ATK x QK Hex80 keyboard is equipped with advanced features designed for competitive gaming and efficient daily use.
- Hall Effect Magnetic Ti Switches: Experience ultra-smooth keystrokes with adjustable actuation from 0.1 mm to 4 mm, offering 0.005 mm step precision. These switches are pre-lubricated for optimal performance.
- Rapid Trigger (RT): Adjust the actuation point dynamically for faster key presses and releases, crucial for competitive gaming.
- Ultra-Low Latency & High Scan Rate: Benefit from an 8 kHz polling rate, full-key 32 kHz scan rate, and a mere 0.08 ms latency for peak responsiveness.
- RGB Lighting: Customize your keyboard's aesthetics with south-facing per-key RGB lighting, offering 16 million colors and over 20 preset modes.
- Profile Switching: Easily switch between different user profiles and lighting configurations using dedicated keys.
Image: A close-up view of the OwLab Ti Magnetic Switches, highlighting their design and functionality.
Image: Visual representation of the keyboard's performance metrics, including 8K Polling Rate, 0.08ms Latency, and 32K Scanning Rate.
Image: The keyboard's RGB lighting in action, with indicators for RGB, Light Bar, and Profile switches.
Using ATK HUB Software
The ATK HUB software allows for comprehensive customization:
- Key Remapping: Assign custom functions to any key.
- Actuation Point Adjustment: Fine-tune the actuation depth of each magnetic switch.
- Rapid Trigger Settings: Configure RT sensitivity and behavior.
- RGB Effects: Create and apply custom lighting patterns and effects.
- Macro Creation: Record and assign complex macros for in-game commands or productivity tasks.
- Champion Presets: Utilize AI-assisted calibration and pre-set modes for optimized performance.
Video: An overview of the ATK QK Hex80 HE Magnetic Gaming Keyboard, demonstrating its features, customization options, and performance capabilities.
Maintenance
Cleaning Your Keyboard
- Disconnect the keyboard from your computer before cleaning.
- Use a soft, lint-free cloth dampened with a small amount of water or a mild cleaning solution to wipe the keycaps and chassis.
- For deeper cleaning, use the provided keycap puller to remove keycaps and clean underneath with compressed air or a small brush.
- Avoid using harsh chemicals, abrasive materials, or excessive moisture, as these can damage the keyboard.
Switch Care
The OwLab Ti magnetic switches are designed for durability. If a switch needs replacement, use the provided switch puller to carefully remove it and insert a new one. Ensure proper alignment to avoid damaging the switch socket.
Troubleshooting
- Keyboard Not Responding: Ensure the USB-C cable is securely connected to both the keyboard and the computer. Try a different USB port or cable.
- RGB Lighting Not Working: Check the keyboard's lighting controls (dedicated keys) or adjust settings within the ATK HUB software.
- Keys Not Registering: If specific keys are not working, try removing and re-seating the keycap and switch. Ensure the ATK HUB software is up to date.
- Software Issues: If you experience problems with the ATK HUB software, ensure your operating system is up to date and try reinstalling the software from the official ATK website.
For further assistance, please visit the ATK support website or contact customer service.
Specifications
| Feature | Detail |
|---|---|
| Product Dimensions | 14 x 5.37 x 1.38 inches (14"L x 5.37"W x 1.38"H) |
| Item Weight | 3.74 pounds |
| Manufacturer | ATK |
| Item Model Number | ATK Hex80 |
| Compatible Devices | Laptop, PC |
| Connectivity Technology | USB-C |
| Keyboard Description | Gaming |
| Recommended Uses | Gaming, Office |
| Special Features | Hot-Swappable, Programmable Keys |
| Color | Sand Gold (RGB Backlighting) |
| Material | Aluminum (CNC Aluminum Chassis) |
| Switches | OwLab Ti Magnetic Switches |
| Polling Rate | 8 kHz |
| Scan Rate | Full-key 32 kHz |
| Latency | 0.08 ms |
| Actuation Adjustment | 0.1 mm to 4 mm (0.005 mm step precision) |
Warranty and Support
The ATK x QK Hex80 HE Magnetic Gaming Keyboard comes with a manufacturer's warranty. For detailed warranty information, product registration, and technical support, please visit the official ATK website at www.atk.pro. You can also find FAQs and contact information for customer service there.
For any issues not covered in this manual, please refer to the online resources or contact ATK customer support directly.
