1. Product Overview
The Maxi-Cosi Mico Pro Infant Car Seat is designed for the comfort and safety of infants weighing 4–30 lbs and up to 32 inches in height. This lightweight car seat offers convenience and ease of use for parents, facilitating smooth transitions between vehicles and compatible strollers.
Figure 1: Maxi-Cosi Mico Pro Infant Car Seat with base and canopy extended.
Key Features:
- Lightweight Design: Contoured, ergonomic handle for comfortable carrying.
- Easy Installation: Features a 1-click LATCH system and large, visible belt guides for secure installation with or without the base (taxi mode).
- Enhanced Comfort: ClimaFlow technology provides ventilation to keep your baby cooler. Extra plush padding on removable infant head and lumbar inserts ensures a secure and cozy ride.
- Premium Fabrics: PureCosi fabrics are made without added fire retardant treatments. EcoCare fabric is 100% recycled from plastic bottles, offering softness, comfort, and breathability. All cushions are machine-washable and dryer-safe.
- Safety Standards: Engineered and tested to meet or exceed federal safety standards, including side impact protection.
- Travel System Ready: Compatible with select Maxi-Cosi strollers for a complete travel system.
2. Safety Information
Always prioritize your child's safety. Read and understand all warnings and instructions before using the car seat. Failure to follow these instructions could result in serious injury or death.
Important Safety Guidelines:
- Ensure the car seat is installed correctly, either with the LATCH system or vehicle seat belt, according to the instructions provided in this manual.
- Always secure your child in the 5-point harness system. The harness straps should be snug against your child's body, and the chest clip should be at armpit level.
- The Mico Pro Infant Car Seat is designed for rear-facing use only for infants from 4 to 30 lbs and up to 32 inches.
- Never leave your child unattended in the car seat.
- Do not use accessories or parts not approved by Maxi-Cosi.
- The car seat meets Federal Side Impact Standard.
Figure 2: The Mico Pro Infant Car Seat is designed to meet federal side impact standards, ensuring enhanced protection for your child.
3. Setup and Installation
Proper installation is crucial for your child's safety. The Mico Pro Infant Car Seat offers two primary installation methods: using the stay-in-car base with the 1-click LATCH system or using the vehicle's seat belt for 'taxi mode' without the base.
3.1 Installing the Stay-in-Car Base (LATCH System)
- Place the base on the vehicle seat in the rear-facing position.
- Locate your vehicle's lower anchor bars.
- Extend the LATCH connectors from the car seat base and attach them to the vehicle's lower anchor bars until you hear a click.
- Press down firmly on the base and tighten the LATCH strap until the base is secure and does not move more than one inch side-to-side or front-to-back at the belt path.
- Adjust the recline position of the base to ensure the level indicator is within the acceptable range for your infant's weight.
Figure 3: The 1-click LATCH system provides a simple and secure installation of the car seat base.
3.2 Installing without the Base (Taxi Mode)
For installations without the base, use the vehicle's seat belt. Large, visible belt guides on the car seat indicate the correct path for the seat belt to ensure a secure fit.
- Place the car seat rear-facing on the vehicle seat.
- Route the vehicle's lap and shoulder belt through the designated belt guides on the car seat.
- Buckle the vehicle's seat belt and remove all slack, ensuring the car seat is tightly secured.
3.3 Attaching/Detaching the Car Seat from the Base or Stroller
The Mico Pro features a 1-hand release mechanism for easy attachment and detachment from its base or compatible Maxi-Cosi strollers.
- To attach: Align the car seat with the base or stroller adapters and press down firmly until it clicks into place. Verify it is securely attached by pulling upwards on the car seat.
- To detach: Squeeze the release handle located at the back of the car seat and lift the car seat upwards.
Figure 4: The contoured, ergonomic handle is designed for comfortable carrying.
4. Operating the Car Seat
4.1 Securing Your Child
- Place your child in the car seat.
- Bring the shoulder straps over your child's shoulders and buckle the harness.
- Pull the harness adjustment strap located at the front of the car seat until the harness is snug. You should not be able to pinch any excess webbing at your child's shoulder.
- Position the chest clip at armpit level.
4.2 Adjusting the Harness Height
The harness height can be adjusted to accommodate your growing child. Ensure the shoulder straps are at or just below your child's shoulders when rear-facing.
4.3 Using the Canopy
The car seat features a large, extendable canopy to provide shade and protection from the elements. Simply pull the canopy forward or push it back to adjust its position.
Figure 5: A baby comfortably secured in the Mico Pro Infant Car Seat.
5. Maintenance and Cleaning
Regular maintenance and cleaning will help prolong the life of your car seat and ensure a hygienic environment for your child.
5.1 Fabric Care
All infant car seat cushions are machine-washable and dryer-safe. Refer to the care labels on the fabric for specific washing instructions. The PureCosi and EcoCare fabrics are designed for easy cleaning.
Figure 6: The car seat features EcoCare (100% recycled) and PureCosi (no added fire retardants) fabrics for comfort and easy cleaning.
5.2 Shell and Harness Cleaning
Wipe the car seat shell and harness straps with a damp cloth and mild soap. Do not submerge the harness straps in water, as this can weaken the webbing.
6. Troubleshooting
If you encounter any issues with your Maxi-Cosi Mico Pro Infant Car Seat, please review the following common concerns. For problems not listed here or if issues persist, contact Maxi-Cosi customer support.
- Harness too tight/loose: Ensure the harness adjustment strap is properly used and the shoulder straps are at the correct height for your child.
- Car seat not secure: Re-check the installation steps for both LATCH and seat belt methods. Ensure the base or car seat does not move more than one inch at the belt path.
- Difficulty with 1-hand release: Ensure the release handle is fully squeezed before attempting to lift the car seat.
7. Specifications
| Feature | Specification |
|---|---|
| Product Dimensions | 12.2"D x 17.32"W x 12.2"H |
| Item Model Number | IC418HHI |
| Maximum Weight Recommendation | 30 Pounds |
| Material Composition | Soft goods (fabric): 12.5%, Plastic: 85%, Hardware: 2.5% (tubing). Fabric part: POLYESTER FIBER BATTING 57%, POLYURETHANE FOAM PAD 43%. |
| Number of Reclining Positions | 1 |
| Batteries Required | No |
| Orientation | Rear Facing |
| Harness Type | 5-Point |
| Item Weight | 16.09 pounds |
| Installation Type | Seatbelt, Latch |
| Color | Sea Salt |
8. Official Product Video
Video 1: This official product video from Maxi-Cosi highlights the key features and benefits of the Mico Pro Infant Car Seat, including its lightweight design, easy installation, and comfort features.
9. Warranty and Support
For detailed warranty information, please refer to the official documentation included with your Maxi-Cosi Mico Pro Infant Car Seat or visit the official Maxi-Cosi website. Maxi-Cosi offers protection plans for extended coverage, which can be purchased separately.
If you require further assistance, have questions, or need to report an issue, please contact Maxi-Cosi customer support through their official website or the contact information provided in your product packaging.
