1. Introduction
Thank you for choosing the AMADVI Y30WE 15-Inch Under Counter Ice Maker. This appliance is designed for efficient and reliable ice production, suitable for both commercial and home use. This manual provides essential information for the safe installation, operation, and maintenance of your ice maker. Please read it thoroughly before use and retain it for future reference.

Image: The AMADVI Y30WE 15-inch under counter ice maker, featuring a stainless steel finish.
2. Safety Instructions
To prevent injury to users or damage to the appliance, please observe the following safety precautions:
- Ensure the ice maker is properly grounded to avoid electrical shock.
- Do not operate the appliance with a damaged power cord or plug.
- Keep ventilation openings clear of obstructions.
- Do not store explosive substances such as aerosol cans with a flammable propellant in this appliance.
- Only use potable water for ice production.
- Unplug the unit before cleaning or performing any maintenance.
- This appliance uses R290a refrigerant. Servicing should only be performed by qualified personnel.
3. Package Contents
Verify that all items are present in the package:
- Ice Maker (1 unit)
- Water Filter (1 unit)
- Ice Scoop (1 unit)
- Door Handle (1 unit)
- Additional accessories for installation
4. Specifications
| Brand | AMADVI |
| Model Name | Y30WE |
| Product Dimensions (D x W x H) | 18.5" x 15" x 33.78" |
| Ice Production Capacity | Up to 100 lbs per day |
| Ice Storage Capacity | 55 lbs |
| Refrigerant | R290a |
| Ice Making Cycle | 40 crystal clear ice cubes in approximately 15 minutes |
| Item Weight | 27 kg |

Image: Detailed view of the ice maker's dimensions (15"W x 18.5"D x 33.78"H), showing the location of lights, tank drain, water inlet, and drain port.
5. Setup and Installation
5.1 Placement
The AMADVI Y30WE ice maker can be installed as a freestanding unit or seamlessly under a standard kitchen or bar counter. Ensure adequate ventilation around the unit, especially at the front grille.

Image: The AMADVI Y30WE ice maker integrated under a kitchen counter, demonstrating its compact fit.

Image: Comparison showing the ice maker as a freestanding unit next to a counter and installed under a counter, highlighting its versatile placement options.
5.2 Reversible Door
The stainless steel door features reversible hinges, allowing it to be mounted for left or right-hand opening. Refer to the detailed instructions in the included accessory guide for changing the door swing direction.

Image: Two ice makers side-by-side, illustrating the reversible door design with options for left-hand or right-hand opening.
5.3 Water Connection
This ice maker is designed for gravity drainage. Connect the water inlet to a potable water supply and ensure the drain hose is properly routed to a suitable drain point. The drain location can be selected to best suit your installation.
5.4 Electrical Connection
Connect the ice maker to a dedicated, grounded electrical outlet. Refer to the product label for specific voltage and amperage requirements.
6. Operating Instructions
6.1 Control Panel
The ice maker features an intelligent control panel with an LED digital display and mechanical buttons for easy operation. Indicators show power status, ice full, ice making, reservation, and clean mode. Fault alerts are also displayed.

Image: Close-up of the intelligent control panel with LED display and buttons for power, ice thickness adjustment, reservation, self-cleaning, and blue light control.
6.2 Ice Making
Once connected to water and power, turn on the unit. The ice maker will begin producing ice automatically. It can produce up to 100 lbs of ice per day, with a storage capacity of 55 lbs. Approximately 40 crystal clear ice cubes are produced in about 15 minutes per cycle.

Image: Infographic highlighting key performance features: 40 pieces per cycle, 100 lbs per day production, 55 lbs storage capacity, powerful compressor, and fast heat dissipation.
6.3 Adjustable Ice Thickness
Use the control panel to adjust the thickness of the ice cubes. Options typically include:
- Thin Ice: Approximately 8-10 minutes per cycle.
- Medium Ice: Approximately 10-15 minutes per cycle.
- Thick Ice: Approximately 15-20 minutes per cycle.

Image: Visual representation of adjustable ice thickness settings (Thin, Medium, Thick) and their corresponding ice production times.
6.4 24-Hour Appointment Timing
The control panel allows you to set a 24-hour timer for scheduled ice production.
6.5 Built-in Blue Light
The ice maker includes a built-in blue light. To control this light, briefly press the 'Melting/Light' button on the control panel when the unit is powered on.
6.6 Self-Cleaning Function
The unit features a self-cleaning program. In standby mode, press and hold the 'CLEAN' button for 5 seconds to activate the self-cleaning cycle.
Video: An instructional video demonstrating how to activate the self-cleaning mode by pressing and holding the 'Reservation/Clean' button, and how to control the blue light using the 'Melting/Light' button on the control panel.
7. Maintenance
7.1 Regular Cleaning
Regular cleaning is essential for optimal performance and hygiene. In addition to the self-cleaning function, periodically wipe down the exterior stainless steel shell with a soft cloth and mild detergent. The food-grade PP liner inside the ice storage bin should also be cleaned regularly.

Image: Cross-section view illustrating the ice maker's construction, including the stainless steel shell, thickened foam layer for insulation, and food-grade PP liner, emphasizing its design for maintaining ice quality.
7.2 Water Filter
The included water filter helps ensure clean ice. Replace the filter periodically according to usage and water quality to maintain ice purity and prevent mineral buildup.
7.3 Long-Term Storage
If the ice maker will not be used for an extended period, perform a self-cleaning cycle, drain all water from the unit, and unplug it. Store in a dry, well-ventilated area.
8. Troubleshooting
This section addresses common issues. For more complex problems or fault alerts displayed on the control panel, please refer to the comprehensive troubleshooting guide in the full product manual or contact customer support.
- No Ice Production: Check water supply, power connection, and ensure the unit is turned on.
- Ice is Too Thin/Thick: Adjust the ice thickness setting on the control panel.
- Ice Maker is Noisy: Ensure the unit is level and not touching any surrounding surfaces. Check for any obstructions in the fan area.
- Water Leakage: Verify all water connections and drain hose are secure and free from damage.
9. Warranty and Support
9.1 Warranty Information
AMADVI products are covered by a manufacturer's warranty. Please refer to the warranty card included with your purchase for specific terms, conditions, and duration. Keep your proof of purchase for warranty claims.
9.2 Customer Support
For technical assistance, troubleshooting beyond this manual, or warranty service, please contact AMADVI customer support. Contact details can typically be found on the AMADVI website or in your product packaging.
