EAFC JC11

EAFC JC11 1200A Car Jump Starter with 150 PSI Air Compressor and 20000mAh Power Bank User Manual

Model: JC11 | Brand: EAFC

1. Introduction

Thank you for choosing the EAFC JC11 Car Jump Starter with Air Compressor. This versatile device is designed to provide reliable emergency power for jump-starting vehicles, inflating tires, charging mobile devices, and offering illumination in various situations. Please read this manual carefully before use to ensure safe and optimal operation.

EAFC JC11 Jump Starter Power Pack with clamps connected to a car battery

Figure 1: The EAFC JC11 Jump Starter Power Pack connected to a car battery, illustrating its primary function.

2. Safety Information

Always observe the following safety precautions to prevent injury or damage to the device and your vehicle:

  • Ensure the jump starter is fully charged before initial use and recharge every 3 months to maintain battery health.
  • Do not discharge and charge the device simultaneously.
  • Connect the jump cables correctly: red clamp to positive (+), black clamp to negative (-). Incorrect connection may cause sparks or damage.
  • Remove the jump cables within 30 seconds after the vehicle starts.
  • Do not use the device to charge your car battery directly. It is for jump-starting only.
  • Operate within the specified temperature range of -20 °C to 60 °C.
  • Keep out of reach of children.

3. Package Contents

Verify that all items are present in your package:

  • 1 x EAFC JC11 Car Jump Starter with Air Compressor
  • 1 x 12V Jump Cable with Smart Clamps
  • 1 x Air Pump Hose
  • 3 x Gas Nozzles (for various inflatables)
  • 1 x USB-C Charging Cable
  • 1 x Portable Storage Bag
  • 1 x User Manual
EAFC JC11 Jump Starter and its accessories neatly arranged in a portable case

Figure 2: All components of the EAFC JC11 package, including the jump starter, cables, nozzles, and storage bag.

Video 1: Unboxing of a similar jump starter, demonstrating the contents and initial setup.

4. Product Overview

The EAFC JC11 is a multi-functional device combining a powerful jump starter, a 150 PSI air compressor, a 20000mAh power bank, and an LED flashlight. It features a robust PC+ABS casing and a clear digital display for easy monitoring.

Image showing common car issues like dead battery and flat tire, highlighting the need for a multi-functional device.

Figure 3: Illustrates common roadside emergencies that the EAFC JC11 is designed to address.

5. Setup

5.1 Initial Charging

Upon receiving your EAFC JC11, it is crucial to fully charge the device before its first use. This ensures optimal performance and extends battery life.

  1. Connect the provided USB-C charging cable to the device's input port.
  2. Connect the other end of the cable to a suitable USB power adapter (not included).
  3. Charge the device for at least 4 hours until the battery indicator shows 100%.

Note: For prolonged product life, it is recommended to fully discharge the battery (e.g., by using the flashlight) and then fully charge it after receiving the product. Recharge the device every 3 months if not in regular use.

6. Operating Instructions

6.1 Jump Starting a Vehicle

The EAFC JC11 can jump-start 12V vehicles with gasoline engines up to 4.0L and diesel engines up to 2.0L.

  1. Ensure the jump starter is sufficiently charged (at least 50%).
  2. Connect the smart jump cable to the jump start port on the EAFC JC11.
  3. Attach the red (+) clamp to the positive terminal of your vehicle's battery.
  4. Attach the black (-) clamp to the negative terminal of your vehicle's battery.
  5. Once connected, the smart clamps will indicate readiness (e.g., a green light).
  6. Start your vehicle's engine.
  7. Once the engine starts, immediately remove the smart clamps from the car battery, then disconnect the cable from the jump starter within 30 seconds.
Close-up of the EAFC JC11 smart clamps correctly attached to a car battery terminals.

Figure 4: Proper connection of the smart jump cables to a vehicle's battery for jump-starting.

Video 2: Demonstration of using a car jump starter with an air compressor to start a vehicle.

6.2 Using the Air Compressor

The integrated 150 PSI air compressor can inflate car tires, motorcycle tires, bicycle tires, and balls. It offers five inflation modes and three pressure units (BAR, KPA, PSI).

  1. Connect the air pump hose to the device's air output port.
  2. Attach the appropriate gas nozzle to the hose and then to the item you wish to inflate.
  3. Select the desired inflation mode and set the target pressure using the device's controls.
  4. Start the inflation process. The compressor will automatically stop once the preset pressure is reached.

6.3 Using as a Power Bank

The 20000mAh capacity allows you to charge various USB-powered devices.

  1. Connect your device's USB charging cable to one of the EAFC JC11's USB output ports (9V/2A, 12V/1.5A).
  2. The device will automatically begin charging your smartphone, tablet, or other compatible device.
  3. The DC output (12V-16.8V, 10A) can power other 12V accessories.

Note: Charging efficiency for smartphones and tablets is approximately 50% due to energy conversion.

Video 3: Instructions on how to use the 12V DC constant output mode for charging devices.

6.4 Using the LED Flashlight

The built-in LED light offers three modes for various needs:

  • Bright: For general illumination.
  • Flashing: For signaling or attracting attention.
  • SOS: For emergency signaling.

Press the dedicated light button to cycle through the modes.

EAFC JC11 device displaying its LED light in different modes: Lighting, SOS, and Strobe.

Figure 5: The EAFC JC11's LED flashlight demonstrating its various illumination modes.

7. Maintenance

  • Store the device in a cool, dry place away from direct sunlight and extreme temperatures.
  • Recharge the device every 3 months to prevent deep discharge and prolong battery life.
  • Clean the exterior with a soft, dry cloth. Do not use harsh chemicals or abrasive materials.

8. Troubleshooting

  • Device not turning on: Ensure the device is charged. If the battery is completely depleted, it may take a few minutes of charging before the display activates.
  • Vehicle not starting: Check that the smart clamps are correctly connected to the battery terminals. Ensure the jump starter has sufficient charge. If the vehicle's battery is severely damaged, the jump starter may not be able to start it.
  • Air compressor not inflating: Verify that the air pump hose and nozzle are securely attached. Check the selected inflation mode and target pressure.
  • Charging mobile devices slowly: The efficiency for charging mobile devices is approximately 50%. Ensure your device's cable is functioning correctly.

9. Specifications

FeatureSpecification
BrandEAFC
ModelJC11
Peak Current1200 A
Starting Current600 A
Battery Capacity20000 mAh
Max Air Compressor Pressure150 PSI
Engine Compatibility (Gasoline)Up to 4.0 L
Engine Compatibility (Diesel)Up to 2.0 L
LED Lighting ModesBright, Flashing, SOS
USB Output9V/2A, 12V/1.5A
DC Output12V-16.8V, 10A
Operating Temperature-20 °C to 60 °C
Housing MaterialPC + ABS
Product Dimensions4.2 x 8.7 x 19 cm
Product Weight869 g
Image showing the dimensions and key specifications of the EAFC JC11 device.

Figure 6: Visual representation of the EAFC JC11's dimensions and core functionalities.

10. Warranty and Support

For any questions or concerns regarding your EAFC JC11 Car Jump Starter, please do not hesitate to contact our customer support. Refer to your purchase documentation for specific warranty details.

Related Documents - JC11

Preview EAFC 2000A/1200A Car Jump Starter User Manual
User manual for the EAFC 2000A/1200A Car Jump Starter. Learn how to use, charge, and safely operate this portable car battery booster and power bank.
Preview EAFC CZK-3690 Portable Air Compressor User Manual
User manual for the EAFC CZK-3690 portable air compressor, providing instructions on operation, features, safety precautions, and warranty information for car, bike, and ball inflation.
Preview EAFC Electric Car Polisher - 12V 5-inch Wireless Polisher
Detailed specifications and indicator light guide for the EAFC 12V 5-inch wireless car polisher, covering functions like waxing, polishing, and dent repair. Includes technical parameters and battery status indicators.
Preview EAFC Smart Battery Charger User Manual for H-6E, H-8E, H-10E, H-15E, 100W, 200W Models
User manual for EAFC Smart Battery Chargers (models H-6E, H-8E, H-10E, H-15E, 100W, 200W). Learn about charging modes, 9-stage charging, repair function, safety precautions, and troubleshooting for various 12V batteries.
Preview Smart Charger 12V 10A 24V 5A User Manual
User manual for the Smart Charger 12V 10A 24V 5A, detailing its components, operation, charging modes, schedules, product parameters, temperature compensation, repair function, 9-stage charging process, and safety precautions.