TUTOTAK 2-Tier End Table Instruction Manual

Introduction

Thank you for choosing the TUTOTAK 2-Tier End Table. This manual provides essential information for the safe assembly, operation, and maintenance of your new furniture. Please read these instructions carefully before beginning assembly and retain them for future reference.

This versatile table is designed for use as an end table, side table, or nightstand, offering two tiers of storage. Its compact design is suitable for small spaces in living rooms and bedrooms.

Safety Guidelines

• Always assemble the product on a soft, clean surface to prevent scratches.
• Ensure all screws and fasteners are securely tightened before use. Periodically check and re-tighten as necessary.
• Do not overload the shelves. Distribute weight evenly.
• Keep small parts and packaging materials away from children to avoid choking hazards.
• Avoid placing hot items directly on the table surface without protective coasters.
• Do not stand or sit on the table.

Package Contents

Before assembly, verify that all components listed below are present and undamaged. If any parts are missing or damaged, please contact customer service.

Note: Additional screws may be included for alternative configurations or as spares.

Assembly Instructions

No special tools are required for assembly, only the included Allen wrench and a screwdriver (not included).

1. Prepare the Workspace: Unpack all components and lay them out on a clean, soft surface to prevent damage. Identify each part according to the package contents list.
2. Attach Legs to Bottom Shelf: Take the bottom shelf (B) and attach four legs (C) to its corners using the shorter screws (E). Ensure the pre-drilled holes align. Do not fully tighten the screws yet.
3. Attach Top Shelf: Place the top shelf (A) onto the upper ends of the four legs (C). Align the pre-drilled holes and secure with the longer screws (F).
4. Tighten All Screws: Once both shelves are attached, gently place the table upright. Systematically tighten all screws (E and F) using the provided Allen wrench. Ensure the table is stable and level.
5. Install Adjustable Feet: Screw the adjustable feet (D) into the bottom of each leg. These feet can be adjusted to stabilize the table on uneven floors and protect your flooring from scratches.

Figure 1: Assembled table with dimensions (11.8"D x 15"W x 21.8"H).

Alternative Configurations (Optional)

This table's design allows for flexible configurations. If you have multiple units, you can stack them to create a taller storage unit or arrange them side-by-side. Use the provided extra screws for secure stacking if desired.

Usage

The TUTOTAK 2-Tier End Table is designed for various uses:

• Living Room: Use as a side table next to a sofa or armchair to hold drinks, remote controls, books, or decorative items.
• Bedroom: Functions as a nightstand for lamps, alarm clocks, phones, and bedtime reading.
• Small Spaces: Its compact footprint makes it ideal for apartments or rooms with limited space.

Figure 2: End table in a living room setting.

Figure 3: End table used as a nightstand in a bedroom.

Care and Maintenance

• Cleaning: Wipe the table surfaces with a soft, damp cloth. Avoid harsh chemicals or abrasive cleaners, as they may damage the finish.
• Spills: Clean spills immediately to prevent staining, especially on the matte finish.
• Heat Protection: Always use coasters under hot beverages or dishes to protect the surface from heat marks.
• Sunlight: Avoid prolonged exposure to direct sunlight to prevent fading or discoloration.
• Stability: Periodically check all screws and connections to ensure they remain tight. Re-tighten if any looseness is detected.

Troubleshooting

• Table is Wobbly: Ensure all screws are fully tightened. Adjust the leveling feet on the bottom of each leg to compensate for uneven floor surfaces.
• Parts Missing/Damaged: If you find any parts missing or damaged upon opening the package, do not proceed with assembly. Contact TUTOTAK customer service immediately for assistance.
• Difficulty Assembling: Review the assembly instructions carefully. Ensure all parts are oriented correctly. If issues persist, contact customer service.

Specifications

Warranty and Support

TUTOTAK stands behind the quality of its products. If you have any questions, concerns, or require assistance with your end table, please do not hesitate to contact our customer service team. We aim to respond within 24 hours.

For support, please refer to the contact information provided with your purchase or visit the official TUTOTAK website.