Introduction
Thank you for choosing the Vehipa GL-1603F 4-in-1 Aquarium Filter. This internal filter system is designed to provide comprehensive filtration, oxygenation, water circulation, and wave-making functions for 40 to 70-gallon aquariums. Please read this manual thoroughly before installation and operation to ensure proper use and maintenance of your filter.
Product Features
- Multi-functional Design: Integrates cleaning, deodorizing, oxygenation, adjustable flow, water circulation, and wave-making.
- Ultra-Quiet Operation: High-performance motor operates efficiently under 30 dB.
- Powerful Suction: 10W power pump with a 225 GPH flow rate for effective waste and impurity capture.
- Efficient Multi-Layer Filtration: Removable filtration process with high-quality sponges to capture debris, absorb odors, and maintain clear water.
- Adjustable Oxygenation (Bubble Mode): Continuously generates bubbles to increase air flow and elevate oxygen levels.
- Transparent Body Design: Allows for easy monitoring of viscous substance buildup and filter media condition.
- Fish Waste Isolation: Prevents waste and impurities from clogging the sponge, extending filter media lifespan.
Image: The Vehipa 4-in-1 Aquarium Filter showcasing its multi-functional filtration, including impurity adsorption, deep filtration, oxygen increase, wave making, water cycle, convenient drainage, and impurity isolation.
Image: An illustration of the 4-in-1 internal fish tank filter in operation, demonstrating its wave-making, air supply, water pumping, and water circulation features within an aquarium environment.
Safety Information
- Always disconnect the power supply before performing any maintenance, installation, or cleaning.
- Ensure the filter is fully submerged in water during operation. Running dry can damage the motor.
- Do not operate if the power cord or plug is damaged.
- This appliance is for indoor use only and intended for aquariums.
- Keep out of reach of children.
- Ensure a drip loop is formed with the power cord to prevent water from traveling along the cord and reaching the electrical outlet.
Package Contents
The Vehipa GL-1603F Aquarium Filter package includes:
- Aquarium filter unit
- Bio sponge filter media
- Duckbill mouth (output nozzle)
- Oxygen tube
Setup Instructions
- Unpack Components: Carefully remove all parts from the packaging and inspect for any damage.
- Assemble Filter Media: Insert the bio sponge filter media into the designated compartments within the transparent filter body. You may customize with additional media like ceramic bio-rings or activated carbon (not included) if desired.
- Attach Output Nozzle: Connect the duckbill mouth (output nozzle) to the filter head. This nozzle can be adjusted 180 degrees to direct water flow.
- Connect Oxygen Tube: If using the oxygenation feature, attach the oxygen tube to the air intake port on the filter head. Ensure the other end of the tube is above the water surface.
- Position Filter: Submerge the filter completely in your aquarium. Use the three powerful suction cups on the back of the filter head to securely fasten it to the glass surface of the aquarium. Ensure the filter is placed vertically.
- Check Water Level: Verify that the water level in your aquarium is above the minimum water line indicated on the filter. The filter must be fully submerged to operate correctly.
- Connect Power: Once the filter is securely installed and fully submerged, connect the power cord to a suitable electrical outlet. Ensure a drip loop is in place.
Image: Various flexible installation methods for the Vehipa aquarium filter, demonstrating how it can be positioned in different aquatic environments.
Image: Detailed view of the filter's adjustable nozzle for water flow direction, three powerful suction cups for secure attachment, and a flow-adjustable guard basket with a 0.12-inch mesh to protect small fish.
Operating Instructions
- Power On: Once plugged in, the filter will begin operating.
- Adjust Water Flow Direction: The duckbill output nozzle can be rotated 180 degrees to direct the water flow as needed for optimal circulation or wave-making.
- Adjust Oxygenation: If the oxygen tube is connected, you can adjust the air flow using the adjustable oxygen valve to control the amount of bubbles generated.
- Monitor Operation: Observe the filter to ensure proper water circulation and oxygenation. The transparent body allows for visual inspection of filter media and debris collection.
Maintenance
Regular maintenance is crucial for the longevity and efficiency of your aquarium filter.
- Disconnect Power: Always unplug the filter from the power outlet before any cleaning or maintenance.
- Remove Filter from Aquarium: Carefully detach the filter from the aquarium glass.
- Disassemble Filter: Gently separate the filter components, including the filter head, transparent body, and debris collection chamber.
- Clean Filter Sponges: Remove the bio sponge filter media. Rinse them thoroughly in old aquarium water (from a water change) to preserve beneficial bacteria. Avoid using tap water directly, as chlorine can kill these bacteria. Replace sponges if they are heavily degraded.
- Clean Debris Collection Chamber: Empty and rinse the debris collection chamber to remove accumulated waste. The transparent design makes it easy to see when this needs cleaning.
- Clean Impeller: Periodically, remove the impeller from the filter head and clean it and its housing to ensure smooth operation and prevent blockages.
- Reassemble and Reinstall: Once all components are clean, reassemble the filter and reinstall it in the aquarium following the setup instructions.
- Power On: Plug the filter back into the power outlet.
Image: The multi-layer filtration system of the Vehipa filter, illustrating how sponges effectively filter impurities and remove odors, with options for customizing filtration media.
Image: A close-up of the filter's transparent chamber and debris collection system, highlighting how it separates and collects waste while preventing small fish from being drawn in.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Filter not running | No power; Impeller jammed; Motor failure | Check power connection; Clean impeller and housing; Contact support if motor is faulty. |
| Reduced water flow | Clogged filter media; Impeller dirty; Air intake blocked | Clean or replace filter sponges; Clean impeller; Clear air intake tube. |
| Excessive noise | Impeller dirty or damaged; Filter not fully submerged; Air in pump | Clean or replace impeller; Ensure filter is fully submerged; Gently shake filter to release trapped air. |
| Aquarium water remains cloudy | Insufficient filtration; Overfeeding; New tank syndrome | Clean/replace filter media; Reduce feeding; Perform partial water changes; Allow time for beneficial bacteria to establish. |
| No bubbles from oxygenation | Oxygen tube blocked or disconnected; Air valve closed | Check and clear oxygen tube; Ensure air valve is open and properly connected. |
Specifications
| Feature | Detail |
|---|---|
| Model Number | GL-1603F |
| Power | 10W |
| Flow Rate | 225 GPH |
| Recommended Tank Size | 40-70 Gallons |
| Product Dimensions (L x W x H) | 2.76" x 2.76" x 12.4" |
| Item Weight | 0.57 Kilograms (1.26 Pounds) |
| Material | Acrylonitrile Butadiene Styrene (ABS) |
| Power Source | Corded Electric |
Image: Detailed product specifications including model, power, recommended tank size, and dimensions for the Vehipa aquarium filter.
Warranty and Support
Vehipa products are manufactured to high-quality standards. For warranty information, technical support, or assistance with your Vehipa GL-1603F Aquarium Filter, please refer to the contact information provided with your purchase or visit the official Vehipa website. Please retain your proof of purchase for warranty claims.