1. Introduction
Thank you for purchasing the ZEBRONICS Zeb Vigor 100 Tower Speaker. This manual provides essential information for the safe and efficient operation of your device. Please read it thoroughly before use and retain it for future reference.
2. Safety Instructions
- Do not expose the speaker to water or moisture.
- Do not open the speaker casing; refer all servicing to qualified personnel.
- Keep the speaker away from direct sunlight, heat sources, and open flames.
- Ensure proper ventilation around the speaker to prevent overheating.
- Use only the power cord supplied with the device.
- Avoid listening at high volume levels for extended periods to prevent hearing damage.
3. Package Contents
Verify that all items are present in the package:
- Trolley DJ Speaker: 1 Unit
- Remote Control: 1 Unit
- Wireless Microphone: 1 Unit
- Power Cord: 1 Unit
- Input Cable (3.5mm): 1 Unit
- QR Code Guide: 1 Unit
4. Product Overview
The ZEBRONICS Zeb Vigor 100 is a versatile tower speaker designed for various audio applications, featuring multiple connectivity options and a robust sound output.
Key Features:
- Triple Full Range 20.32cm Drivers for comprehensive sound.
- 100W RMS Output for powerful audio delivery.
- TWS (True Wireless Stereo) Function for connecting two speakers.
- Karaoke & Mic Recording Function with included Wireless MIC.
- Multiconnectivity: Bluetooth v5.0, USB, mSD, AUX, FM.
- LED Display for easy navigation.
- Remote control for convenient operation.
- Carry Handle & Wheels for portability.
- RGB Lights for visual effects.
- Dual 6.3mm Microphone input.
- Built-in Rechargeable Battery.
- Dedicated Control Buttons for intuitive use.
Image: The ZEBRONICS Zeb Vigor 100 Tower Speaker showcasing its 100W RMS output, positioned next to a television.
Image: Close-up view of the ZEBRONICS Zeb Vigor 100 highlighting its triple full-range 20.32cm drivers.
Image: A collage showing the speaker's carry handle and wheels for portability, the included remote control, the dedicated control buttons on the top panel, and the dual 6.3mm microphone inputs on the rear panel.
5. Setup
5.1 Charging the Speaker
Before initial use, fully charge the speaker. Connect the provided power cord to the speaker's AC input and a suitable power outlet. The charging time is approximately 9.8 hours. A full charge provides up to 5 hours of playback at 50% volume with LED lights off.
5.2 Powering On/Off
Locate the power switch on the speaker's control panel. Toggle the switch to the 'ON' position to power on the speaker. Toggle to 'OFF' to power off.
6. Operating Instructions
6.1 Bluetooth Connection (BT v5.0)
- Power on the speaker. The speaker will automatically enter Bluetooth mode or you can select it using the 'MODE' button.
- Enable Bluetooth on your mobile device or computer.
- Search for available devices and select "ZEB-VIGOR 100" from the list.
- Once paired, the speaker will indicate a successful connection, and you can begin playing audio.
6.2 USB/mSD Playback
- Insert a USB flash drive or mSD card (up to 32GB) containing MP3 audio files into the respective port.
- The speaker will automatically detect the storage device and begin playback. If not, press the 'MODE' button to select USB or mSD mode.
- Use the control buttons or remote to play, pause, skip tracks, or adjust volume.
6.3 AUX Input
- Connect one end of the 3.5mm input cable to the AUX port on the speaker.
- Connect the other end to the audio output jack of your external device (e.g., smartphone, MP3 player).
- Press the 'MODE' button to select AUX input.
- Control playback and volume from your external device or the speaker.
6.4 FM Radio
- Press the 'MODE' button to select FM radio mode.
- Press the Play/Pause button to auto-scan and save available FM stations (frequency range 87.5 MHz - 108 MHz).
- Use the Previous/Next track buttons to navigate between saved stations.
6.5 Karaoke & Mic Recording Function
- Connect the wireless microphone or a wired microphone (not included) to one of the dual 6.3mm microphone inputs.
- Adjust the microphone volume and echo using the dedicated controls.
- To record, ensure a USB drive or mSD card is inserted. Press the 'REC' button (if available on the control panel/remote) to start recording. Press again to stop.
6.6 TWS (True Wireless Stereo) Function
To connect two Zeb Vigor 100 speakers for a stereo experience:
- Ensure both speakers are powered on and in Bluetooth mode.
- On one speaker (this will be the master), press and hold the 'TWS' button. The speaker will indicate it is searching for another TWS device.
- The two speakers will automatically pair. Once connected, they will function as a stereo pair.
- Connect your mobile device to the master speaker via Bluetooth as described in section 6.1.
Image: The ZEBRONICS Zeb Vigor 100 speaker highlighting its up to 5-hour battery backup and the True Wireless Stereo (TWS) function, showing two speakers connected wirelessly.
6.7 RGB Lights
The speaker features dynamic RGB lights. Use the dedicated 'LIGHT' switch or button on the control panel or remote to cycle through different light modes or turn them off.
Image: The ZEBRONICS Zeb Vigor 100 Tower Speaker with its vibrant RGB lights illuminated.
6.8 Control Panel and Remote Control
The speaker features a top-mounted control panel with buttons for mode selection, playback control, volume adjustment, microphone controls, and light control. A remote control is also provided for convenient operation from a distance.
Image: A detailed view of the ZEBRONICS Zeb Vigor 100's control panel, showing options for Bluetooth v5.0, USB, mSD, AUX, and FM connectivity, along with various control buttons.
7. Maintenance
- Cleaning: Use a soft, dry cloth to clean the speaker's exterior. Do not use abrasive cleaners or solvents.
- Storage: When not in use for extended periods, store the speaker in a cool, dry place, away from direct sunlight and extreme temperatures.
- Battery Care: To prolong battery life, avoid fully discharging the battery frequently. Charge the speaker regularly, even if not in use.
8. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Speaker does not power on. | Battery is depleted or power cord is not connected. | Charge the speaker or ensure the power cord is securely connected. |
| No sound output. | Volume is too low, incorrect mode selected, or device not properly connected. | Increase volume, select the correct input mode (BT, USB, AUX, FM), or re-establish connection. |
| Bluetooth pairing fails. | Speaker is not in pairing mode, or device is too far. | Ensure speaker is in Bluetooth mode, move device closer, or clear previous pairings on your device. |
| Microphone not working. | Microphone not powered on, or volume too low. | Ensure wireless mic has batteries and is powered on. Adjust mic volume. |
9. Specifications
| Feature | Specification |
|---|---|
| Output Power (RMS) | 100W |
| Driver Size | Full range 20.32cm x 3, Tweeter 3.8cm |
| Impedance | Full range 4Ω x 1, 8Ω x 2; Tweeter 8Ω |
| Frequency Response | 65Hz-18kHz |
| S/N Ratio | ≥60dB |
| File Format Support (USB/SD) | MP3 |
| Line Input | 3.5mm |
| Max Supported USB/SD Memory Size | 32GB |
| FM Frequency Range | 87.5 MHz - 108 MHz |
| Charging Time | 9.8 hours |
| Playback Time | 5 hours* (at 50% Volume, LED OFF) |
| Bluetooth Name | ZEB-VIGOR 100 |
| Bluetooth Version | v5.0 |
| Product Dimension (W x D x H) | 28.6 x 28.5 x 90 cm |
| Net Weight | 6.4 kg |
| Connector Type | Aux, USB |
| Number of Channels | 2 |
| Audio Input | Wired Microphone, Wireless Microphone, Line-Level Input |
| Colour | Black |
| Compatible Devices | Audio Player, DJ Mixer, DVD Player, Drum, Guitar, Headphone, Headset, Karaoke System, Keyboard, Laptop, MP3 Player, Microphone, Piano, Smartphone, Tablet, Television |
10. Warranty and Support
10.1 Warranty Information
The ZEBRONICS Zeb Vigor 100 Tower Speaker comes with a 1 Year Warranty from the date of purchase. Please retain your purchase receipt for warranty claims. The warranty covers manufacturing defects under normal use conditions.
10.2 Manufacturer
Zebronics India Pvt Ltd.
13/7 Smith Road, Royapettah, Chennai, Tamil Nadu - 600 002, India
10.3 Customer Support
For technical assistance, service, or warranty inquiries, please contact Zebronics customer support through their official website or the contact information provided in the QR code guide included in your package.
