Introduction
Welcome to the WEELMOTION S31 Electric Scooter instruction manual. This guide provides essential information for the safe assembly, operation, maintenance, and troubleshooting of your new electric scooter. Please read this manual thoroughly before first use to ensure optimal performance and safety.
Safety Guidelines
Your safety is paramount. Always adhere to the following guidelines when operating the scooter:
- Always wear a helmet and appropriate protective gear (knee pads, elbow pads) when riding.
- Ensure the scooter is fully charged and all components are securely fastened before each ride.
- The scooter is designed for children within the age range of 8-12 years and supports a maximum weight of 175 lbs.
- Do not ride in wet conditions, on uneven surfaces, or in heavy traffic.
- Maintain a safe distance from other riders, pedestrians, and obstacles.
- Familiarize yourself with local regulations regarding electric scooter use.
- This product is UL 2272 Certified, ensuring compliance with electrical safety standards.
Product Overview
The WEELMOTION S31 Electric Scooter features a lightweight aluminum frame, a 150W motor, and vibrant LED lighting for an engaging riding experience. It is equipped with a digital display and dual braking system for enhanced control and safety.

This image displays the WEELMOTION S31 Electric Scooter in its fully assembled, upright position, showcasing the illuminated LED lights along the stem and pedal deck. An inset image shows the scooter folded for storage.

A detailed view of the handlebar-mounted digital display, clearly showing the speedometer (in km/h) and battery life indicator, along with labels for the power button, brake, and throttle.
Assembly Instructions
The WEELMOTION S31 scooter comes largely pre-assembled. Follow these steps to complete the setup:
- Unfold the Scooter: Carefully lift the handlebar stem until it locks into the upright position. Ensure the folding mechanism is securely latched.
- Attach Handlebars: Insert the handlebar grips into the stem. Ensure they are firmly in place and aligned.
- Check Connections: Verify that all cables and wires are properly connected and not pinched.
- Initial Charge: Fully charge the scooter before its first use. Refer to the 'Charging the Battery' section for details.
Operating Instructions
Push-Start Technology
The WEELMOTION S31 features a safe push-start mechanism. The motor will only activate once the scooter reaches a speed of 1.8 mph (3 km/h) to prevent sudden acceleration.
- Step 1: Turn On. Press the power button on the digital display to turn on the scooter.
- Step 2: Propel Manually. Place one foot on the deck and use the other foot to push off the ground, gaining initial momentum.
- Step 3: Engage Throttle. Once the scooter reaches approximately 1.8 mph (3 km/h), gently press the thumb throttle with your right hand. The motor will engage.
- Step 4: Ride. Place both feet onto the deck and enjoy your ride.

A sequential diagram detailing the 'Push to Start' procedure: 1. Turn on scooter, 2. Propel manually, 3. Engage throttle at 1.8 mph, 4. Place both feet and ride.
Lights and Display
The scooter is equipped with bright front LED lights and vibrant RGB pedal lights. The digital display shows your current speed (in km/h) and battery level.

The scooter is shown in a low-light setting, illustrating its vibrant RGB pedal lights and bright front lights, with examples of red, green, and blue light modes. The text 'Shine Your Way' and '3 Lights Modes' are visible.
Braking
The S31 features a dual braking system for reliable stopping power:
- Front Electronic Brake: Activated by the lever on the handlebar.
- Rear Fender Brake: Activated by pressing down on the rear fender with your foot.
Always apply brakes smoothly and gradually to avoid sudden stops or loss of control.

This image illustrates the dual braking system of the scooter, featuring a close-up of the rear foot brake and the digital brake lever on the handlebar, labeled 'Rear Foot Brake' and 'Digital Brake'.
Charging the Battery
To ensure optimal battery life and performance, follow these charging instructions:
- Locate the charging port on the scooter.
- Ensure the scooter is turned off before connecting the charger.
- Plug the charger into a standard wall outlet, then connect the charging cable to the scooter's charging port.
- The indicator light on the charger will typically turn red during charging and green when fully charged.
- Do not overcharge the battery. Disconnect the charger once charging is complete.
- Charging time is approximately 3-4 hours for a full charge, providing up to 5 miles of range.

An illustrative diagram of the scooter's internal battery pack, emphasizing its long-lasting capacity and efficient power delivery.
Folding and Storage
The WEELMOTION S31 is designed for easy portability and storage with its one-step folding mechanism.
- To Fold: Locate the folding latch at the base of the handlebar stem. Release the latch and carefully fold the stem downwards until it clicks into place.
- To Unfold: Release the folding latch and lift the handlebar stem until it locks securely in the upright position.
When storing, keep the scooter in a dry, cool place away from direct sunlight and extreme temperatures.

A visual guide showing the scooter's one-step folding design, with arrows indicating the movement from unfolded to folded positions. Dimensions for both states are provided, along with the product weight.
Maintenance
Regular maintenance ensures the longevity and safe operation of your scooter.
- Cleaning: Wipe the scooter with a damp cloth after each use. Avoid using harsh chemicals or direct water spray.
- Tires: The scooter uses solid 6.5-inch tires, which require minimal maintenance. Regularly check for wear and tear.
- Battery Care: Charge the battery regularly, even if not in use, to maintain its health. Avoid fully discharging the battery.
- Fasteners: Periodically check all screws and bolts to ensure they are tight.
Troubleshooting
Here are solutions to common issues you might encounter:
| Issue | Possible Cause | Solution |
|---|---|---|
| Scooter does not turn on | Low battery; Loose connection | Charge the battery; Check all cable connections. |
| Motor does not engage | Not reaching push-start speed; Faulty throttle | Ensure scooter reaches 1.8 mph before pressing throttle; Contact support if issue persists. |
| Lights not working | Loose connection; Electrical fault | Check connections; Contact support. |
| Reduced range/speed | Low battery; Overweight rider; Steep incline | Fully charge battery; Ensure rider is within weight limit; Avoid steep inclines. |
Specifications
Detailed technical specifications for the WEELMOTION S31 Electric Scooter:
| Feature | Specification |
|---|---|
| Brand | WEELMOTION |
| Model Name | S31 |
| Motor Power | 150W |
| Max Speed | 10 mph (16 km/h) |
| Max Range | 5 Miles (8 km) |
| Weight Limit | 175 Pounds |
| Item Weight | 15.4 Pounds (7 kg) |
| Product Dimensions (Unfolded) | 36"L x 13"W x 30"H |
| Wheel Size | 6.5 Inches |
| Wheel Material | Rubber (Solid) |
| Frame Material | Aluminum |
| Brake Style | Front Electronic, Rear Fender |
| Special Features | Digital Display, Foldable, LED Lights, Non-Slip Deck, Rechargeable |
| Certifications | UL 2272 Certified |
Warranty and Support
For warranty information or technical support, please refer to the product packaging or contact WEELMOTION customer service directly. Keep your purchase receipt as proof of purchase.




