Introduction
Thank you for choosing the roomfitters Metal Twin Size House Platform Bed. This manual provides essential information for the safe assembly, operation, and maintenance of your new bed frame. Please read all instructions carefully before beginning assembly and retain this manual for future reference.
Important Safety Information
- Always follow assembly instructions precisely. Incorrect assembly can lead to instability and injury.
- Ensure all bolts and screws are securely tightened before use. Periodically check and re-tighten as necessary.
- Do not exceed the recommended weight limit for a twin-size bed.
- Keep small parts away from children during assembly to prevent choking hazards.
- Place the bed on a flat, level surface.
- This product is designed for indoor use only.
Image: The fully assembled roomfitters Metal Twin Size House Platform Bed, showcasing its house-shaped frame and low-profile design. This image provides a visual reference of the complete product.
Package Contents
Before assembly, please verify that all components listed below are present and undamaged. If any parts are missing or damaged, do not proceed with assembly. Contact customer support for assistance.
| Part | Description | Quantity |
|---|---|---|
| A | Headboard/Footboard Frame Sections | 2 |
| B | Side Rails | 2 |
| C | Support Slats | Approx. 12-14 |
| D | Top Horizontal Bar | 1 |
| E | Assembly Hardware (Bolts, Washers, Allen Wrench) | 1 Set |
Note: The exact number of slats may vary slightly.
Setup: Assembly Instructions
Follow these steps carefully to assemble your roomfitters Metal Twin Size House Platform Bed. It is recommended to have two people for assembly.
Tools Required:
- Allen Wrench (included)
- Unpack and Identify Parts: Carefully remove all components from the packaging. Lay them out on a soft, clean surface to prevent scratches. Refer to the "Package Contents" section to identify each part.
- Assemble the Base Frame:
Connect the two Side Rails (B) to one Headboard/Footboard Frame Section (A) using the provided bolts and washers. Do not fully tighten the bolts yet. Repeat for the second Headboard/Footboard Frame Section (A).
Image: A view of the bed frame's base structure, illustrating how the main frame components connect. This helps visualize step 2 of assembly.
- Attach the Top Horizontal Bar:
Secure the Top Horizontal Bar (D) between the two Headboard/Footboard Frame Sections (A) at the top of the house structure. Use the appropriate bolts and washers. Ensure it is centered and level.
- Install Support Slats:
Place the Support Slats (C) across the Side Rails (B). Ensure they are evenly spaced and securely seated in their designated slots or attached with provided fasteners. The slats form the mattress support.
Image: A detailed view of the bed frame's corner and the metal slats, demonstrating how the slats are integrated into the frame for mattress support.
- Final Tightening:
Once all parts are assembled, go back and fully tighten all bolts using the Allen wrench. Do not overtighten, but ensure all connections are firm and secure. The frame should feel stable.
- Inspect:
Perform a final inspection to ensure all parts are correctly installed and tightened. The bed frame is now ready for use.
Operating Instructions
General Use
- Place a standard twin-size mattress directly onto the support slats. A box spring is not required.
- The unique triangular frame design includes a horizontal board at the top, which can be used for hanging lightweight decorative items or towels. Do not hang heavy objects that could compromise stability.
- The low-profile design and X-shaped safety railings are intended to provide a secure sleeping environment, especially for younger users.
Maintenance
Cleaning and Care
- Regular Cleaning: Wipe the metal frame with a dry cloth to remove dust.
- Spot Cleaning: For spills or marks, wipe with a damp cloth. Avoid abrasive cleaners or harsh chemicals, as these can damage the finish.
- Hardware Check: Periodically (e.g., every 3-6 months) check all bolts and screws to ensure they remain tight. Re-tighten if necessary to maintain structural integrity.
- Avoid Moisture: Keep the bed frame in a dry environment to prevent rust or damage to the metal.
Troubleshooting
Refer to the table below for common issues and their solutions.
| Problem | Possible Cause | Solution |
|---|---|---|
| Bed frame is wobbly or unstable. | Loose bolts or uneven surface. | Ensure all bolts are securely tightened. Move the bed to a flat, level surface. |
| Squeaking noises. | Loose connections or friction between metal parts. | Re-tighten all bolts. If squeaking persists, apply a small amount of lubricant (e.g., silicone spray) to connection points. |
| Missing parts during assembly. | Packaging error or lost during unpacking. | Double-check all packaging materials. Contact roomfitters customer support for replacement parts. |
Specifications
| Feature | Detail |
|---|---|
| Model Number | RF-N709WF307193AAH |
| Size | Twin |
| Product Dimensions (L x W x H) | 78" x 41.3" x 63" |
| Item Weight | 30.5 lbs |
| Material | Metal |
| Color | Pink |
| Assembly Required | Yes |
| Special Feature | No Box Spring Needed, Triangle Structure Frame |
| UPC | 781962561500 |
Image: A technical diagram illustrating the precise dimensions (length, width, height) of the bed frame, including the height of the house structure and the sleeping platform.
Warranty and Support
Warranty Information
roomfitters products are manufactured with quality and care. For specific warranty details regarding your Metal Twin Size House Platform Bed, please refer to the warranty card included with your purchase or visit the official roomfitters website. Typically, warranties cover manufacturing defects under normal use.
Customer Support
If you have any questions, require assistance with assembly, or need to report missing/damaged parts, please contact roomfitters customer support. You can often find contact information on the packaging, the brand's official website, or through your purchase platform.
For more information about roomfitters products, visit the roomfitters Store.
