1. Product Overview
This manual provides essential information for the safe and efficient operation of your FOTING 1.5HP Shallow Well Pump with Pressure Tank. Please read these instructions carefully before installation and use.
Image 1: FOTING 1.5HP Shallow Well Pump with Pressure Tank in a garden setting.
Key Features:
- Powerful 1.5HP Motor: Features a durable impeller, offering a suction capability of up to 23 feet, a maximum flow rate of 1340 GPH, and a maximum lift of 164 feet. Suitable for garden irrigation and domestic water supply.
- Automatic Pressure System: A 5-gallon water tank with a pressure switch maintains water pressure automatically. The pressure switch is preset to activate at 1.5 bar and deactivate at 3 bar. A built-in pressure gauge allows for real-time monitoring.
- Durable Construction: Constructed with reinforced thermoplastic and a finely finished iron tank for corrosion and wear resistance. Includes overheat protection to prevent motor burnout. Comes with two adapters.
- Versatile Applications: Ideal for watering lawns, gardens, farms, agricultural structures, and other household water transfer needs. Can be connected to pipeline systems for pressurization.
- Leak Prevention: Equipped with a carbon ceramic mechanical seal to prevent water leakage and extend service life. Features a 1" NPT outlet and inlet for easy connection.
2. Product Components
Familiarize yourself with the main components of the shallow well pump system.
Image 2: Diagram showing key components such as 1" NPT Outlet, 1" NPT Intake, Start Waterproof Cover, 5-Gal Pressure Tank, High Pressure Soft Tube, Pressure Gauge, Mechanical Pressure Switch, and Stable Base.
Image 3: Detailed view of the pressure gauge for real-time observation, mechanical pressure switch (Auto On <1.5bar, Auto Off >3.0bar), and thermal overload protection feature.
3. Setup and Installation
Proper installation is crucial for optimal performance and safety. Ensure all connections are secure before operation.
3.1 Connecting Pipes
- Connect the inlet and outlet pipes to the pump. The pump features 1" NPT inlet and outlet.
- Ensure the inlet water pipe is equipped with a check valve to prevent backflow.
- Use the provided NPT1" to GHT3/4" adapters if connecting to standard garden hoses.
Image 4: Illustrates connection methods for water taps and self-priming, showing NPT 1" to GHT 3/4" connector size and IP54 protection type.
3.2 Priming the Pump
Before the first use, the pump needs to be primed with water.
- After connecting the inlet and outlet pipes, remove the prime plug located on the top of the pump housing.
- Carefully add water into the pump until it is completely filled.
- Replace the prime plug securely.
4. Operating Instructions
Once installed and primed, the pump is ready for operation.
- Ensure the pump is placed on a stable, level surface.
- Connect the pump to a 115V power source.
- Turn on the power switch. The pump will automatically start when pressure drops below 1.5 bar and shut off when it reaches 3 bar.
- Monitor the pressure gauge to observe the water pressure.
Image 5: Diagram illustrating working performance, including max height-lift of 164 ft, max suction of 23 ft, and max pressure of 4.5 bar, with corresponding flow rates at various heights.
4.1 Applications
This pump is designed for various water transfer and boosting applications:
- Garden watering and irrigation systems.
- Farm irrigation for agricultural structures.
- Boosting domestic water supply pressure.
- General water transfer tasks.
Image 6: Examples of wide applicability, including garden watering, farm irrigation, and water transfer.
5. Maintenance
Regular maintenance ensures the longevity and efficient operation of your pump.
- Cleaning: Periodically inspect the pump and connections for debris or blockages. Clean as necessary.
- Storage: If storing the pump for an extended period, especially in freezing temperatures, drain all water from the pump and pipes to prevent damage.
- Inspection: Check for any signs of wear, corrosion, or leaks. Address any issues promptly.
- Overheat Protection: The pump is equipped with overheat protection. If the pump shuts off unexpectedly, allow it to cool down before restarting. Check for any obstructions or dry running conditions.
6. Troubleshooting
This section addresses common issues you might encounter. For problems not listed here, please contact customer support.
| Problem | Possible Cause | Solution |
|---|---|---|
| Pump does not start. | No power; tripped circuit breaker; motor overheated. | Check power connection; reset breaker; allow motor to cool. |
| Pump runs but no water flows. | Pump not primed; inlet pipe blocked; air leak in suction line. | Prime the pump; clear blockage; check for tight connections. |
| Low water pressure. | Partial blockage; worn impeller; pressure switch setting. | Check for blockages; inspect impeller; verify pressure switch settings. |
| Pump cycles too frequently. | Pressure tank issue; small leak in system. | Inspect pressure tank; check for leaks in plumbing. |
7. Product Specifications
| Specification | Value |
|---|---|
| Brand | FOTING |
| Model Number | JGP110037C |
| Horsepower | 1.5 HP |
| Voltage | 115 Volts |
| Maximum Flow Rate | 1340 Gallons Per Hour (GPH) |
| Maximum Lifting Height | 164 Feet |
| Maximum Suction Capability | 23 Feet |
| Pressure Tank Capacity | 5 Gallons |
| Pressure Switch Preset Range | 1.5 bar (on) to 3 bar (off) |
| Power Source | Corded Electric |
| Product Dimensions | 17"L x 10.5"W x 20"H |
| Material | Plastic, Metal |
| Item Weight | 33.5 pounds |
| Included Components | 2*NPT1" to GHT3/4" adapters, Shallow Well Pump |
| UPC | 747721089180 |
8. Warranty and Customer Support
The FOTING 1.5HP Shallow Well Pump with Pressure Tank comes with a THREE-YEAR after-sale service, protecting against manufacturing defects or malfunctions.
For any warranty claims, service-related concerns, or technical assistance, please contact Amazon's dedicated support team. They provide round-the-clock assistance to ensure prompt resolution of your inquiries.