1. Introduction
This instruction manual provides comprehensive guidance for the assembly, operation, and maintenance of your Tvilum 1 Drawer, 2 Door Sideboard, Model 76234gm. Please read all instructions carefully before beginning assembly and retain this manual for future reference.

Figure 1.1: Tvilum 1 Drawer, 2 Door Sideboard, Black Matte finish.
2. Safety Information
WARNING: Failure to follow these safety instructions may result in injury or damage to the product.
- Assembly: This product requires assembly by two adults. Do not attempt to assemble alone.
- Tipping Hazard: Furniture can tip over, causing serious or fatal injuries. Always secure this product to the wall using the provided anti-tip hardware.
- Weight Limits: Do not exceed the specified weight limits for the drawer, shelves, and top surface. Refer to the 'Specifications' section for details.
- Placement: Place the sideboard on a flat, level surface. Avoid placing it near heat sources or in direct sunlight to prevent material degradation.
- Children: Keep small parts and packaging materials away from children during assembly.
3. Package Contents
Before beginning assembly, verify that all parts and hardware are present. Refer to the detailed parts list included in your product packaging. If any components are missing or damaged, contact Tvilum customer support.
- Sideboard panels (top, bottom, sides, back, drawer front, door panels)
- Drawer slides and hardware
- Door hinges and hardware
- Adjustable shelves and shelf pins
- Assembly hardware (screws, dowels, cam locks, etc.)
- Anti-tip hardware
- Instruction manual
4. Assembly Instructions
Assembly is recommended for two individuals. Ensure you have a clear, spacious area for assembly. Tools required: Phillips head screwdriver, hammer (optional, for dowels), and a level.
Step 4.1: Prepare Panels and Hardware
Unpack all components and lay them out on a soft, clean surface to prevent scratches. Identify each panel and hardware piece using the included parts list.
Step 4.2: Assemble the Base Frame
Attach the side panels to the bottom panel using dowels and cam locks as indicated in the diagrams. Ensure all connections are secure.
Step 4.3: Install Drawer Slides
Secure the drawer slides to the interior side panels of the sideboard frame. Pay attention to the orientation of the slides (left and right).

Figure 4.1: Detail of the drawer slide mechanism.
Step 4.4: Assemble the Drawer
Connect the drawer sides, back, and front panel. Install the remaining drawer slide components onto the drawer box. Insert the drawer bottom panel.
Step 4.5: Attach the Top Panel and Back Panel
Secure the top panel to the assembled frame. Carefully align and attach the back panel using the provided fasteners. Ensure the back panel is flush for structural integrity.

Figure 4.2: Rear view of the sideboard, showing the back panel attachment.
Step 4.6: Install Doors and Adjustable Shelves
Attach the door hinges to the door panels and then to the sideboard frame. Adjust hinges for proper door alignment. Insert shelf pins into desired holes and place the adjustable shelves.

Figure 4.3: Sideboard with drawer and doors open, showcasing the interior storage and adjustable shelves.
Step 4.7: Install Anti-Tip Hardware
This step is crucial for safety.
Secure the anti-tip hardware to the top rear edge of the sideboard and to a wall stud using the provided screws. Ensure the strap is taut. This prevents accidental tipping.
5. Operating Instructions
5.1 Drawer Operation
The sideboard features one handle-free drawer. To open, gently pull the top edge of the drawer front. To close, push firmly until it is flush with the sideboard frame.
5.2 Door Operation
The two doors are also handle-free. To open, apply gentle pressure to the edge of the door. To close, push firmly until the door is flush with the sideboard frame.
5.3 Adjustable Shelves
The interior of the sideboard features three adjustable shelves. To reposition a shelf, remove all items from the shelf, lift the shelf to remove it from the pins, then relocate the shelf pins to the desired height and reinsert the shelf.
6. Maintenance and Care
- Cleaning: Wipe surfaces with a soft, damp cloth. Avoid abrasive cleaners or harsh chemicals, which can damage the finish.
- Spills: Clean spills immediately to prevent staining or damage to the engineered wood.
- Hardware: Periodically check all screws and fasteners to ensure they are tight. Retighten if necessary.
- Sunlight: Avoid prolonged exposure to direct sunlight to prevent fading or discoloration.
- Humidity: Maintain a stable humidity level in the room to prevent warping or cracking of the wood material.
7. Troubleshooting
- Drawer/Door Not Closing Properly: Check for obstructions in the drawer slides or hinge mechanisms. Ensure the sideboard is on a level surface. Adjust hinges if doors are misaligned.
- Wobbling: Ensure all assembly hardware is securely tightened. Verify the sideboard is placed on a level surface. Use shims if necessary.
- Scratches/Minor Damage: For minor scratches, touch-up pens or furniture markers matching the black matte finish may be used.
8. Specifications
| Feature | Detail |
|---|---|
| Brand | Tvilum |
| Model Number | 76234gm |
| Color | Black Matte |
| Material | Engineered Wood |
| Product Dimensions (D x W x H) | 15.75" x 31.65" x 39.53" |
| Item Weight | 72.5 Pounds (approx. 32.9 kg) |
| Number of Drawers | 1 |
| Number of Doors | 2 |
| Adjustable Shelves | 3 (behind doors) |
| Assembly Required | Yes (2 people recommended) |

Figure 8.1: Product dimensions overview.

Figure 8.2: Weight capacity guidelines for the sideboard.
9. Warranty and Support
Tvilum products are manufactured with quality and care. For specific warranty information, please refer to the documentation included with your purchase or visit the official Tvilum website. For assistance with assembly, missing parts, or other inquiries, please contact Tvilum customer support through their official channels.
Online Support: Visit the Tvilum Store on Amazon