1. Product Overview
The Aquaguard Glory WS RO+UV+UF water purifier is designed to provide clean and safe drinking water. It features a multi-stage purification process, including Reverse Osmosis (RO), Ultraviolet (UV), and Ultra Filtration (UF) technologies. This system also incorporates a unique 3-in-1 Active Copper Technology, which infuses water with beneficial copper and zinc.
This model is suitable for various water sources, including borewell, municipal, and tanker water, ensuring versatile purification for different household needs.
Image Description: A front view of the Aquaguard Glory WS water purifier, showcasing its sleek black and rose gold design. The unit displays a '5 Year Free Service' badge and the 'Aquaguard' brand logo at the bottom.
2. Setup and Installation
2.1 Unpacking
Carefully unpack the water purifier and all its components. Ensure all parts listed in the 'Included Components' section are present and undamaged.
2.2 Included Components
- Installation Kit
2.3 Installation Type
The Aquaguard Glory WS water purifier supports both wall-mounted and countertop installation. Choose the appropriate location based on your household's requirements and water source accessibility.
2.4 Power Source
The unit operates on a corded electric power source. Ensure a suitable power outlet is available near the installation site.
Image Description: A visual representation of the Aquaguard Glory WS water purifier with its dimensions indicated: 29 cm (depth), 32 cm (width), and 48 cm (height). This helps in planning the installation space.
3. Operating Instructions
3.1 Purification Process
The Aquaguard Glory WS employs a 10-stage purification process to deliver clean water. This includes:
- Sedi Shield: Removes fine suspended particles.
- Particulate Filter: Further filters out larger impurities.
- Chemi Block: Absorbs organic impurities, chlorine, and other chemical contaminants.
- Taste Adjuster: Enhances the taste of the purified water.
- RO Maxx: Reduces Total Dissolved Solids (TDS), heavy metals, and other harmful substances.
- UV E-Boiling: Eliminates bacteria and viruses, ensuring water is as safe as if boiled for 20 minutes.
- Ultra Filtration: Provides an additional layer of purification, removing microscopic impurities.
- 3-in-1 Active Copper: Infuses water with the goodness of copper and zinc.
Image Description: A detailed diagram showcasing the 10-stage purification process, with individual filter cartridges labeled as Sedi Shield, Chemi Block, RO Maxx, Ultra Filtration, Particulate Filter, Taste Adjuster, UV E-Boiling, and 3-in-1 Active Copper.
3.2 Active Copper Technology
The patented 3-in-1 Active Copper Technology ensures the infusion of the correct amount of copper into the water, adhering to BIS norms. This technology is suitable for all age groups and utilizes a clean-free process.
Image Description: An illustration depicting the 3-in-1 Active Copper Technology, showing a filter cartridge with different layers and icons representing copper infusion, suitability for all age groups, and clean-free technology.
3.3 Water Source Compatibility
The purifier is designed for versatile purification, making it suitable for various water sources:
- Borewell Water
- Municipal Water
- Tanker Water
Image Description: A close-up of the Aquaguard Glory WS water purifier with icons indicating its suitability for borewell water, municipal water, and tanker water, highlighting its versatile purification capabilities.
3.4 Water Saving
This water purifier is designed to save up to 60% more water compared to ordinary RO systems, contributing to water conservation.
Image Description: The Aquaguard Glory WS water purifier dispensing water into a glass, with text indicating 'SAVE UP TO 60% MORE WATER', emphasizing its efficiency.
4. Maintenance
4.1 Filter Life Cycle
The filter life cycle for this unit is approximately 6 months. Regular replacement of filters is crucial for maintaining optimal purification performance and water quality.
4.2 Service Plan
This product includes a 5-year free service plan. It is recommended to utilize this service for scheduled maintenance and filter replacements to ensure the longevity and efficiency of your water purifier.
5. Troubleshooting
If you encounter any issues with your Aquaguard Glory WS water purifier, please refer to the following general troubleshooting steps:
- No Water Flow: Check if the power supply is connected and switched on. Ensure the water inlet valve is open.
- Slow Water Flow: This may indicate clogged filters. Contact customer support for filter inspection and replacement.
- Unusual Taste/Odor: This could be a sign that filters need replacement. Avoid consuming water and contact service personnel immediately.
- Leakage: Turn off the water supply to the purifier and disconnect power. Contact customer support for assistance.
For any issues not resolved by these steps, or for professional assistance, please contact Aquaguard customer support.
6. Specifications
| Brand | Aquaguard |
| Model Number | GWPDGRU5Y00000 |
| Special Feature | 1 Year Filter Life (Note: Filter life cycle is 6 months, 1 year refers to a specific variant feature) |
| Product Dimensions (L x W x H) | 32L x 27W x 48H Centimeters |
| Installation Type | Wall-mounted, Countertop |
| Power Source | Corded Electric |
| Item Weight | 6 Kilograms |
| Lower Temperature Rating | 10 Degrees Celsius |
| Maximum Flow Rate | 250 Liters Per Minute |
| Operating Pressure Range | Up to 3 Kilograms Per Square Centimeter |
| Upper Temperature Rating | 40 Degrees Celsius |
| Supported Water TDS Level Maximum | 1000 PPM |
| Water Saving Percentage | 60% |
| Filter Life Cycle | 6 Months |
| Country of Origin | India |
7. Warranty and Support
7.1 Warranty Information
The Aquaguard Glory WS RO+UV+UF water purifier comes with a 5-year free service plan. Please retain your purchase receipt for warranty claims and service requests.
7.2 Manufacturer Contact
For service, support, or any inquiries, please contact Eureka Forbes Ltd., the manufacturer of Aquaguard products. Contact details can typically be found on the product packaging or the official Aquaguard website.
Manufacturer Address: Eureka Forbes Limited (Formerly Forbes Enviro Solutions Limited) Registered Office Address: B1/B2, 701, 7th Floor, Marathon Innova, Off. Ganpatrao Kadam Marg, Lower Parel (West), Mumbai, Maharashtra – 400013.
