Kawada NBCC_246 Nanoblock Cinnamon Roll Assembly Instructions

Introduction

Welcome to the assembly instructions for your Kawada NBCC_246 Nanoblock Cinnamon Roll building set. This manual provides a step-by-step guide to construct the model. Please read all instructions carefully before beginning assembly.

This set allows you to build a detailed Nanoblock model of Cinnamoroll with a large ribbon, featuring 190 pieces.

Safety Information

• Recommended Age: This product is intended for individuals 12 years and older.
• Small Parts Warning: Contains small parts. Not suitable for children under 3 years due to choking hazard.
• Material: Constructed from ABS and MABS plastic.

Package Contents

Verify that all components are present before starting assembly.

• Nanoblock pieces (190 pieces total)
• Instruction sheet (this document)

Setup and Assembly

Follow these steps to assemble your Nanoblock Cinnamon Roll model.

1. Preparation: Clear a well-lit, flat surface for assembly. Organize your Nanoblock pieces by color and size to facilitate the building process.
2. Base Construction: Begin by constructing the base of the Cinnamon Roll figure as indicated in the included visual guide. Pay close attention to the orientation of the first few layers.
3. Body Assembly: Gradually build up the body of the Cinnamon Roll, layer by layer. Ensure each block is securely connected to the previous one.
4. Facial Features: Attach the small blue blocks for the eyes and the pink blocks for the cheeks, as well as the blue block for the mouth, following the visual instructions.
5. Ears and Ribbon: Construct the ears using the white blocks and the distinctive large blue ribbon using the transparent blue blocks. Attach them to the main body.
6. Final Touches: Review the completed model against the image to ensure all pieces are correctly placed and secured.

Image: The fully assembled Kawada NBCC_246 Nanoblock Cinnamon Roll model. It features a white body with blue eyes, a blue mouth, pink cheeks, and large transparent blue ears/ribbon. The model is constructed from small interlocking plastic blocks.

Operating Instructions (Display)

Once assembled, your Nanoblock Cinnamon Roll model is ready for display.

• Placement: Place the model on a stable, flat surface away from direct sunlight and excessive heat to prevent material degradation.
• Handling: Handle the model carefully to avoid dislodging any blocks.

Maintenance and Care

• Cleaning: To clean the model, gently wipe it with a dry, soft cloth. For stubborn dust, a soft brush or compressed air can be used. Avoid using harsh chemicals or abrasive materials.
• Storage: If disassembling for storage, keep all pieces in a sealed container to prevent loss and dust accumulation.

Troubleshooting

• Missing Pieces: If you believe pieces are missing, carefully re-check the packaging and your work area. Contact Kawada customer support if pieces are genuinely missing.
• Difficulty Connecting Blocks: Ensure blocks are aligned correctly. Apply gentle, even pressure. Do not force blocks together, as this may cause damage.
• Model Instability: Re-examine the connections of the lower layers. Ensure all blocks are firmly pressed into place.

Specifications

Warranty and Support

For warranty information or customer support regarding your Kawada Nanoblock product, please refer to the official Kawada website or contact your retailer. Specific warranty details are not provided in this manual.